Instruction/ maintenance manual of the product RTA210 Dynalink
Go to page of 14
Quick Setup Guide RT A2 1 0 ADSL R outer.
Impor tant This Guide is intended to get you started quickly . We have pre-configured the router for the New Zealand ADSL network. All you need to do is to follow through the steps we describe here. This Guide should be read in conjunction with the ADSL Router User Manual .
Default Configuration for New Z ealand We have pre-configured this router to the following settings. If you accept the settings, please mov e on to Section 2 "Installing the Router".
STEP 1 CONN ECT IT UP For a step-by-step guide refer to Page 5 Chapter 2 Hardware Description & Installation of the ADSL Router User Manual on CDRom. Connect the DSL por t of the router into your ADSL jackpoint (telephone wall socket) with the provided line cor d.
Select DNS Configuration tab , click Enable DNS. T ype in any name for host. Enter your ISP’ s DNS address. Click Add . A second DNS address (if specified) can be added in a similar way . If you ar e unsure what y our ISP’ s DNS address is, you may pick one of the following addresses until your ISP’ s DNS is known: 150.
F or W indows XP/2000: From Contr ol Panel - Network Connections . Open Local Ar ea Connections and click Properties. Double click Internet Protocol (T CP/IP). Select Use the following IP address. Enter 192.168.1.x (x is any number between 2 and 254 ).
ADSL R outer Quick Set-up Guide STEP 4 ENTER INTERNET AC COUNT USER NAME AND PASSW ORD Go to Configur ation > WAN > ATM P V C > Setup A TM PVC . The pre-configur ed "MyConnection" PV C Interface will appear . Scroll down to check that Encapsulation T ype is PPPoA & V C_MUX .
ST EP 5 SAVE CONF IGU RATION AND CHECK IF THE ROUTER IS ONLINE Go to T ool > Save Configur ation . Click on Save . Next go to T ool > R eset Router . Make sure the "Reset to factory default settings" box is NOT ticked. Click R estar t .
DHCP: Configure PC to get IP from DHCP Page 32 Section 4.2 Enable DHCP Page 43 Section 6.2.2 Show DHCP table Page 70 Section 6.5.6 Use the W eb Configuration Manager Page 39 Chapter 5 Change the private IP address of the r outer Page 42 Section 6.2.1 Enable routing RI P v1/v2 Page 45 Section 6.
Indicator lights There are four green indicats on the fr ont panel of the router . All lights will come on indicating self-test in progress ev ery time the router is switched on. Indicator F unction Description PWR Power Off - No power . On - Power is on.
Scroll down to Data Encapulation. Click on the selection box, change Bridge to PPP0A: Remember to click Submit to take effect and then go to T ool > Save > Configuration. Click on Save to sav e the configuration you have enter ed. T roubleshooting Q1.
ping 192.168.1.1 then press Enter . The response should be: Pinging 192.168.1.1 with 32 bytes of data: Reply from 192.168.1.1: bytes=32 time=4ms TTL=30 If you see a similar response, router is communicating with the network correctly and the problem lies elsewhere.
perform a PING test as described in Q1-3, using these addresses: (A) Ping www .dynalink.co.nz (or any valid web addr ess) (B) Ping 205.178.180.16 (or any valid public IP address) If both (A) & (B) returned no reply , go to second image in Step 4 (Section 2 - Configuring Router).
Dynalink Modems Ltd warrants this product against defects in materials and workmanship for a period of twelve months fr om the original date of purchase. We will, at our discretion, r epair or r eplace the faulty unit, free of charge, provided it is returned to us with proof of pur chase from an authorised dealer within the warranty period.
An important point after buying a device Dynalink RTA210 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynalink RTA210 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynalink RTA210 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynalink RTA210 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynalink RTA210 will certainly help you make a decision on the purchase.
If you already are a holder of Dynalink RTA210, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynalink RTA210.
However, one of the most important roles played by the user manual is to help in solving problems with Dynalink RTA210. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynalink RTA210 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
