Instruction/ maintenance manual of the product RTA1335 Dynalink
Go to page of 15
Quick Setup Guide R T A1335 ADSL 2+ 4 -Port Modem Router.
Impor tant This Guide is intended to get you started quickly . W e have made the factory default setting of this router suitable for New Zealand 1 . All you need is to follow thr ough the steps we describe here. This Guide should be read in conjunction with the RTA1335 ADSL Router User’s Manual 2 .
Default Configuration for New Z ealand This Router is shipped with the following factory default settings. Router IP address 192.168.1.1 Subnet mask 255.
Connection of this router to computers is via Ethernet, independent of the Operating System. There is no driver to load. This router comes with a built-in 4-port network switch.
Getting On-line Before you start, the DSL & Ethernet lights on the router must be on. Refer to Section 10 – Troubleshooting of this Guide to resolve any issues. STEP 1 GO TO THE ‘CONNECT TO INTERNET’ PAGE Start your web browser . Enter the default address http://192.
Once connected the screen changes to display the on-line time. The PPP light on the front panel of the router will come on, indicating that you ar e online. Click Disconnect only if you wish to disconnect manually. Y our Internet account user name & password will be saved automatically .
6 ADSL 2+ 4 -Port Modem Router Quick Set-up Guide PPPoE Caution - Only follow this section if your ISP advises explicitly the service is PPPoE. If you hav e followed the pr ocedure below by mistake, r eset router to factor y default will restore r outer to the standard New Z ealand setting.
6. Now follow Step 2 of Section 5 – Getting On-line. The screen will show the changes made: pppoe_0_100 has replaced the default pppoa_0_100. Some adv anced functions of your r outer Firewall, port .
ADSL 2+ 4 -Port Modem Router Quick Set-up Guide a public IP directly from the ISP . This arrangement is suitable for certain advanced applications that require the device behind to r eceive a public WAN I P . Caution: This mode of operation assumes firewall security will be provided by another device on your LAN.
8 The new configuration is displayed. Click Apply to confirm the changes. The router will restart itself to activate the new setting. Y ou will notice all NA T or fir ewall settings disappear from the Adv anced menu hereafter . Now follow S tep 2 of Section 5 – Getting On-line.
ADSL 2+ 4 -Port Modem Router Quick Set-up Guide of your router and network. Use the built in access control list to r estrict access to only authorised Internet hosts.
T roubleshooting Q1. Cannot open the router control panel fr om my browser . 1. Check that the router’ s ETHE R N ET light is on. Check that the ETHE R N ET cable is firmly plugged in. 2. Perform a PING test . In Windows XP or 2000, click Start-Run.
ADSL 2+ 4 -Port Modem Router Quick Set-up Guide • If there is no designated ADSL jackpoint, any jackpoints may be used. Connect the router directly into a jackpoint, or thr ough the port marked MODE M on a filter .
Q5. The r outer’ s IP and/or administrativ e password hav e been modified. But the details have now been for gotten. Y ou can restore the router to factory default by pushing a pin into the hidden reset button located next to the pow er on/off button at the back of the router .
NZ-RTA1335QG-01 Dynalink warrants this product against defects in materials and workmanship for a period of twelve months fr om the original date of purchase. We will, at our discretion, repair or r eplace the faulty unit, free of charge, pr ovided it is returned to us with proof of purchase fr om an authorised dealer within the warranty period.
An important point after buying a device Dynalink RTA1335 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dynalink RTA1335 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dynalink RTA1335 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dynalink RTA1335 you will learn all the available features of the product, as well as information on its operation. The information that you get Dynalink RTA1335 will certainly help you make a decision on the purchase.
If you already are a holder of Dynalink RTA1335, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dynalink RTA1335.
However, one of the most important roles played by the user manual is to help in solving problems with Dynalink RTA1335. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dynalink RTA1335 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
