Instruction/ maintenance manual of the product NSX-AJ800 Aiwa
Go to page of 23
Compact Disc Stereo System En (English) E (Español) F (Français) OPERA TING INSTRUCTIONS MODE D'EMPLOI MANUAL DE INSTRUCCIONES For assistance and information (United States and Puerto Rico) 8B-.
2 En PRECAUTIONS W ARNING T o reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. “CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 En T ABLE OF CONTENTS PRECAUTIONS .................................... 2 PREP ARA TIONS ................................... 4 PAR TS AND CONTROLS ......................... 5 ADJUSTMENTS BEFORE OPERA TIONS ........ 8 CD OPERA TIONS ..................
4 En Connection Plug in the AC power cord to the AC power outlet after all other connections are made. 1 Connect the front speakers. Connect the right front speaker to the SPEAKERS R terminals and the left to the SPEAKERS L terminals. The speaker cords with the white stripes go to the 0 terminals.
5 En Main unit: rear 1 AM LOOP , FM 75 Ω terminals Plug in the supplied AM and FM antennas here. 2 VIDEO/A UX jacks Accepts analog sound signals from external equipment. Connect using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack).
6 En 1 PO WER 6 ST ANDBY/ON Switches the unit on and off (standby). DEMO Switches DEMO on and off. P ANORAMA Selects a mode of the P ANORAMA SOUND PLUS system. 2 CD EDIT/CHECK Displays the remaining playback time of a CD when pressed during playback. Enters AI Edit Recording or Programmed Edit Recording mode when pressed during stop.
7 En Remote control Buttons with same or similar names with the main unit basically have the same function. 1 DISC DIRECT PLA Y 1-3 2 0-9, +10 CD: selects a CD track of the specified number . Radio: tunes in to the station with the specified preset number .
8 En ADJUSTMENTS BEFORE OPERA TIONS Power T urning the unit on Press POWER 6 ST ANDBY/ON (POWER on the remote control). Or press T APE, TUNER/BAND, VIDEO/AUX or CD, the playback will start automatically if a disc or tape is inserted. T urning the unit off Press POWER 6 ST ANDBY/ON again.
9 En Dimmer Adjusts the brightness of the display . 1 Press ECO twice when the unit is turned on, and then within 4 seconds press ENTER. 2 T urn MUL TI JOG to select one of the three dimmer modes or " DIM-OFF ", and then press ENTER. " DIM-OFF " is the brightest and " DIMMER 3 " is the dimmest.
10 En This unit plays back finalized CD-R/RW discs as well as audio CDs. * Open the control panel with P ANEL OPEN/CLOSE if needed. Playback 1 Press CD and load disc(s) Press z CD OPEN/CLOSE to open the disc compartment and place one or two disc(s) with the labeled side up.
11 En Programmed playback Plays back up to 30 selected tracks in programmed order . 1 Press SHIFT+PRGM on the remote control during stop. " PRGM " lights up on the display . 2 Press DISC DIRECT PLA Y 1-3 to select a disc. Go to the next step when the tray stops rotating.
12 En RADIO OPERA TIONS * Open the control panel with P ANEL OPEN/CLOSE if needed. Manual tuning 1 Press TUNER/BAND (SHIFT+BAND on the remote control) repeatedly to select a band. The unit switches to the radio from any other function and alternates between FM and AM.
13 En Adjustments Antennas Keep antennas away from metallic objects, electrical equipment and cords. FM antenna: Extend fully in a T -shape. If receiving condition is poor , connect optional outdoor antenna to FM 75 Ω terminal. Be sure to connect the shield braid of the antenna to the 2 terminal.
14 En T APE OPERA TIONS * Open the control panel with P ANEL OPEN/CLOSE if needed. Playback Use only type I (normal) tapes. 1 Press T APE and insert the tape in either deck. Press z PUSH EJECT to open the cassette holder , and insert with the exposed side down and playback side facing out from the unit.
15 En 3 Press w REC/REC MUTE to start recording. When recording a CD, CD playback starts automatically . When recording input from connected equipment, manually start playback of the source. • Volume or tone adjustment does not affect recording. • " Can’t REC " is displayed if you attempt to record a tape with the tab broken off.
16 En Programmed Edit Recording As you program the CD tracks to record, Programmed Edit Recording displays the remaining recording time for each side of the tape, so you can easily select a set of desired tracks within the length of your tape. 1 Insert the recording tape in DECK 2.
17 En SOUND ADJUSTMENTS * Open the control panel with P ANEL OPEN/CLOSE if needed. BBE Enhances high frequency for sound clarity . Press BBE repeatedly to select one of the three enhancement levels or the off position. • When the sound becomes distorted with the BBE effect, cancel it.
18 En P ANORAMA SOUND PLUS AIWA ’ s unique P ANORAMA SOUND PLUS system uses “ Satellite Speakers ” driven by a separate stereo amplifier circuit to achieve a wide sound stage and clear stereo imaging at the same time.
19 En TIMER OPERA TIONS * Open the control panel with P ANEL OPEN/CLOSE if needed. Sleep timer T urns off the unit automatically after a specified time. 1 Press SHIFT+SLEEP on the remote control. " SLEEP " appears on the display . 2 Press f or g repeatedly to set the sleep timer duration.
20 En T o display the timer setting Press TIMER. The timer -on time, the source and the timer-activated duration are displayed for 6 seconds. Tip: Timer setting can be displayed even while the unit is.
21 En Care and maintenance Occasional care and maintenance of the unit and the software are needed to optimize the performance of your unit. T o clean the cabinet Use a soft and dry cloth. If the unit surfaces are extremely dirty , use a soft cloth lightly moistened with mild detergent solution.
22 En Specifications MAIN UNIT CX-NAJ800 TUNER FM tuning range 87.5 MHz to 108 MHz FM usable sensitivity (IHF) 13.2 dBf FM antenna terminals 75 ohms (unbalanced) AM tuning range 530 kHz to 1710 kHz (1.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Aiwa NSX-AJ800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa NSX-AJ800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa NSX-AJ800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa NSX-AJ800 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa NSX-AJ800 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa NSX-AJ800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa NSX-AJ800.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa NSX-AJ800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa NSX-AJ800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
