Instruction/ maintenance manual of the product Vigor2100 Draytek
Go to page of 37
.
Vigor2100 Series Quick Start Guide Copyright Information Copyright Declarations Copyright 2005 All rights reserved. This publication contains information that is protected by copyright.
ii whatever extent we deem nece ssary tore-store the product to proper operating condition. Any replacement will consist of a new or re-manufactured f unctionally equivalent product of equal value, and will be offer ed solely at our discretion.
iii European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2100 Series Residential Broadband Routers DrayTek Corp.
iv Regulatory Information Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reas onable protection against har mful interference in a residential installation.
i Table of Contents 1. Introduction………………………………………………………….….. 1 1.1 Brief Overview…………………………………………………………..……… 2 1.2 Specifications……………………………………………………….
1 1. Introduction Easy Internet-sharing of your broadband connection Robust firew all to help protect your network from external attacks For Vigor2100VG/V: Making regular phone calls over your broadband connection by simply plugging in y our phone.
2 1.1 Brief Overview The Vigor2100 series broadband router/F irewall with a VoIP phone port, an Internet access solution for your LAN, which provides you with the shared web surfing and countless value-added features, such as Firewall, Security, VoIP, and 802.
3 1.2 Specifications For Vigor2100V/VG For Vigor2100VG/G VoIP (Voice over IP) Supports one FXS(phone) port G.168 line echo-cancellation Gain control Jitter buffer Voice Codec: G.
4 1.3 Front Panel LEDs and Rear Panel Interfaces 1.3.1 Vigor2100V LED Status Explanation on The firewall function is active. Firewall blinking When encountering DoS attacks. E-mail blinking When detecting one or more user-defined E-mails existing on mail server.
5 1.3.2 Vigor2100G LED Status Explanation on The Wireless LAN function is active. WLAN blinking Data packets are transmitted over Wireless LAN. E-mail blinking When detecting one or more user-defined e-mails existing on mail server. orange A normal 10Mbps connection is through its corresponding port.
6 1.3.2 Vigor2100VG LED Status Explanation on The Wireless LAN function is active. WLAN blinking Data packets are transmitted over Wireless LAN. E-mail blinking When detecting one or more user-defined e-mails existing on mail server. orange A normal 10Mbps connection is through its corresponding port.
7 1.4 Package Contains Quick Start Guide CD UK-type power adapter EU-type power adapter USA/Taiwan-type power adapter AU/NZ-type power adapter RJ-45 Cable (Ethernet) RJ-11 Cable for Vigor2100VG/V Ante.
8 2. Quick Install Your Vigor2100 Series Router 2.1 Hardware Installation Before starting to configure the router, you have to connect your devices correctly. 1. Connect the WAN interface to the ex ternal Cable/ADSL modem with a RJ-45 cable. 2. Connect one port of 4-port switch to your computer with a RJ-45 cable.
9 2.2 Configure Your Router via Quick Start Wizard Introduction The Quick Start Wizard is designed for you to easily set up your broadband Internet access.
10 Step 3. Now Quick Start Wizard is switched on. Enter login passwor d. Then click Next to continue. Step 4. Select the appropriate TIME ZONE for your location.
11 Dial on Demand : The router will ONLY connect to your ISP on demand. By “on demand”, it means when any LAN user attempt to send data onto the Internet. When there is no data traffic, the router will close the connection to the ISP because there is no demand.
12 client that will ask for the IP network settings from the DHCP server or PPTP-enabled DSL modem. Specify an IP address: If you are not sure whether there are any DHCP services o n the WAN interface, you can manually assig n an IP address to the interface.
13 Step 6 Review the summary of settings. Vigor2100VG/V apply efficient codecs designed to make the best use of available bandwidth. Vigor2100VG/V also equip with automatic QoS assurance . QoS Assurance assists to assign hi gher priority to voice traffic via Internet for better talking/hearing enjoyment.
14 3. Wireless LAN Settings(for G models) This section will guide you to operate the capabilities of Wireless LAN instantly on the router. Please follo w the menu tree of the Wireless LAN configuration below to set up wireless function.
15 1. Enable Wireless LAN: Check the box to enable wireless function. 2. Mode: Select an appropriate wireless mode. Mixed (11b+11g): The radio can support both IEEE802.11b and IEEE802.11g protocols simultaneously. 11g-only: The radio only supports IEEE802.
16 1. Mode: Select an appropriate encryption to im prove the security and privacy of your wireless data packets. Disable: Turn off the encryption mechanism. WEP Only: Accepts only WEP clients and the encryption key should be entered in WEP Key.
17 4. VoIP Settings (for V models) Hardware Connection The Vigor2100VG/V have one FXS port, the “Phone” port on the rear panel. As mentioned in previous section 2.1 Hardware Installation, you will have to connect it to a conventional analog telephone, either corded or wireless (DECT).
18 The major benefit of this mode is that you don’t have to memorize your friend’s IP address, which might change very frequently if it’s dynamic. Instead of that, you will only have to using dial plan or directly dial your friend’s account name if you are with the same SIP Registrar.
19 4.1 DialPlan Setup In this section, you can set your VoIP contacts in the “phonebook” we called DialPlan - help you to make calls quickly and easily by using “speed-dial” Phone Number . There are total 60 index entries in the DialPlan for you to store all your friends and family members’ SIP addresses.
20 Although the Loop Through function provides convenient live lines for your call, you might prefer None for directing all calls via Internet. Please be reminded that you can still make the call via PSTN by manually dialing “ #0 ” first.
21 The detail explanation of the SIP and Port settings window: SIP Port Set the port number for sending/receiving SIP message for building a session. The default value is 5060. Your peer must set the same value in his/her Registrar. Registrar Set the domain name or IP address of the SIP Registrar server.
22 In the “ VoIP Call Status ” you will find an “R” indicating you have registered with your SIP server..
23 4.3 Calling Scenario Calling via SIP Sever Example 1 John and David both have a SIP Address from different service providers. John’s SIP URL: 1234@draytel.org David’s SIP URL: 4321@iptel.org John’s settings DialPlan index 1 Phone Number : 1111 Display Name: David SIP URL: 4321@iptel.
24 Example 2 John and David both have a SIP Address from the same service provider. John’s SIP URL: 1234@draytel.org David’s SIP URL: 4321@draytel.org John’s settings DialPlan index 1 Phone Number : 1111 Display Name: David SIP URL: 4321@draytel.
25 Peer-to-Peer Calling Example 3 Arnor and Paulin each have a Vigor2500V router, they can call each other without SIP Registrar. Firs t they will have each other’s IP address and assign an Account Name for the port used for calling. Arnor’s SIP URL: 1234@214.
26 5. Trouble Shooting This section will guide you to solve abnormal situations. Please follow the below steps to check your basic installation. Step 1. Is the Hardware Status OK? 1. Check the power line and WLAN/LAN cable connections. Refer to the Quick Installation Guide “2.
27 3. Select on Internet Protocol (TCP/IP) and then click Properties . 4. Select Obtain an IP address automatically and Obtain DNS server address automatically .
28 Step 3 Can You Ping the Router from PC? The default gateway IP address of the router is 192.168.1.1. Please check that if you can ping the router correctly. A. For Windows 1. Open the Command Prompt wi ndow (from start menu> Run ) 2. Type command (for Windows 95/98/ME) or cmd (for Windows NT/ 2000/XP).
29 Step 4 Are the ISP Settings OK? 1. Go to the web configuration GUI and check your ISP settings. 2. Click Internet Access Setup items on the left frame of GUI. A. For PPPoE Users 1. Check that whether the Enable option is selected. 2. Check that whether the Username and Password are entered with correct value given by your ISP.
30 C. For PPTP Users 1. Check that whether the Enable option is selected. 2. Check that whether PPTP Server, Username , Password is entered the correct value given by your ISP. 3. Check that whether LAN2/WAN IP Network Settings is set appropriately or not.
31 rapidly, then release the button. The router will restart with the factory default configuration. After restore the factory default se tting, please repeat Step 1 to Step 4 to reinstall the router. Configur e the router according to your recorded settings.
An important point after buying a device Draytek Vigor2100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Draytek Vigor2100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Draytek Vigor2100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Draytek Vigor2100 you will learn all the available features of the product, as well as information on its operation. The information that you get Draytek Vigor2100 will certainly help you make a decision on the purchase.
If you already are a holder of Draytek Vigor2100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Draytek Vigor2100.
However, one of the most important roles played by the user manual is to help in solving problems with Draytek Vigor2100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Draytek Vigor2100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
