Instruction/ maintenance manual of the product 2200 Dover Finishing Products
Go to page of 23
2020/2220/2520/2210/2510/2200/2500 1 03.27883.100 INSTALLATION INSTRUCTIONS AND OPERATING MANUAL FIREPLACE 2020/2220/2520/2210/2510/2200/2500.
2020/2220/2520/2210/2510/2200/2500 3 03.27883.100 Table of contents pag e Foreword 1. Introduction ....................................................................................................................... 3 2. Safety ....................
2020/2220/2520/2210/2510/2200/2500 3 03.27883.100 Foreword The Installation Manual and Operators Instructions must accompany this appliance. As well as instructions for installa tion and information about use, you will also find advice concerning safety and maintenance.
2020/2220/2520/2210/2510/2200/2500 4 03.27883.100 3 . Princip l e The Dovre model is designed to provide a fireplace convection system without the need to construct a masonry convec tion chamber. The principle of operation is that the cooler air from the lower part of the room is drawn under the base of the inner cast iron unit.
2020/2220/2520/2210/2510/2200/2500 5 03.27883.100 4 . Installation guideline 4 .1. Preparatory measures The fireplace should be hermetically connected to a well - functioning chimney, suff i- ciently enclosed to keep combustible materials (floor and walls) at a distance, and should be installed in a room with sufficien t ventilation.
2020/2220/2520/2210/2510/2200/2500 6 03.27883.100 The same is true for a cover plate or exhaust hood on top of the chimney. The exhaust hood must not narrow the chimney's outlet and should be designed in a way that wind will not hinder, but promote the smoke flow.
2020/2220/2520/2210/2510/2200/2500 7 03.27883.100 Convection air may be led to arrive from both the room and outside (other room, cellar, exterior) to the bottom side of the fire place. In case convection air is supplied (directly or indirectly) from outside, it may also be useful as a supply of fresh air for combustion.
2020/2220/2520/2210/2510/2200/2500 8 03.27883.100 4 .1.4. Combustible material round the fireplace Within the radiation area of the fireplace Assure a distance of at least 80 cm between the opening of the fireplace and co m- bustible material.
2020/2220/2520/2210/2510/2200/2500 9 03.27883.100 4.2.3. Fitting frame surround The decorative frames, 3 and 4 sides versions are fitted to the applaice after install a- tion.
2020/2220/2520/2210/2510/2200/2500 10 03.27883.100 4.2.4. Assembling the “cold handle” Assemble the different parts of the handle, I.e. a screw M8x50, a wooden handle and a nut, as indicated on the s- ketch. 4.2.5. Electrical connection For protection, the unit must always be connected to power.
2020/2220/2520/2210/2510/2200/2500 11 03.27883.100 4 .3. Installation The appliance is designed to be built into a new or existing chimney breast install a- tion to provide space heating by radiant an convected heat.
2020/2220/2520/2210/2510/2200/2500 12 03.27883.100 4.4. Finishing When the appliance is installed in the right place, its connection with the chi m- ney made airtight, and the masonry mantle completely mounted, all loose parts are installed in the appliance.
2020/2220/2520/2210/2510/2200/2500 13 03.27883.100 Example of fireplace installation within combustible material Fireproof floor Combustible ceiling Opening against eventual pressure buildup Chimney E.
2020/2220/2520/2210/2510/2200/2500 14 03.27883.100 Example of installation in an existante fireplace Existant chimney Extra opening for ventilation firepalce Refractory cement or special connector Ope.
2020/2220/2520/2210/2510/2200/2500 15 03.27883.100 5 . Instructions for use 5.1. Fuel The only suitable fuels for this stove are wood, brown coal briquettes and charcoal (when you u se a coal - basket). No other fuels are allowed to be burnt, as they can inflict serious damage to your stove.
2020/2220/2520/2210/2510/2200/2500 16 03.27883.100 glowing enough, you can put the logs, the charcoal or the brown coal briquettes on the fire. 5.3. Burning wood Always keep the stove doors tightly closed. Never let the doo rs open when the fire is burning.
2020/2220/2520/2210/2510/2200/2500 17 03.27883.100 Before adding some extra coals, u se the shaker grate or the supplied shovel, and shake till the glowing parts fall into the ash plate ; then add the coals. After a few minutes, add some more coals until you can only see the glow of the prev ious filling.
2020/2220/2520/2210/2510/2200/2500 18 03.27883.100 6 . Maintenance It takes only little effort to keep your appliance in good condition. Regularly check whether the sealing cord s till closes the doors tightly enough. Minor paint damage can be touched up with a can of spray paint.
2020/2220/2520/2210/2510/2200/2500 19 03.27883.100 Annex 1: technical data sheet Model 2500 / 2510 / 2520 2510D / 2520/2/3 2200 / 2210 / 2220 / 2020 Nominal heat output 10 kW 10 kW 8 kW (2020: 7 kW) F.
2020/2220/2520/2210/2510/2200/2500 20 03.27883.100 Annex 2 : D imensions 2500 2200.
2020/2220/2520/2210/2510/2200/2500 21 03.27883.100 2220 2210S 2520S 2510S.
2020/2220/2520/2210/2510/2200/2500 22 03.27883.100 2020S 2520S/2/3 2510D.
2020/2220/2520/2210/2510/2200/2500 72 03.27883.100 DOVRE N.V. Tel : +32 (0) 14 65 91 91 Nijverheidsstraat 18 Fax : +32 (0) 14 65 90 09 B - 2381 Weelde E - mail : info@dovre.
An important point after buying a device Dover Finishing Products 2200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dover Finishing Products 2200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dover Finishing Products 2200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dover Finishing Products 2200 you will learn all the available features of the product, as well as information on its operation. The information that you get Dover Finishing Products 2200 will certainly help you make a decision on the purchase.
If you already are a holder of Dover Finishing Products 2200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dover Finishing Products 2200.
However, one of the most important roles played by the user manual is to help in solving problems with Dover Finishing Products 2200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dover Finishing Products 2200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
