Instruction/ maintenance manual of the product CT-X432M Aiwa
Go to page of 10
CT -X432M YU STEREO CAR CASSETTE RECEIVER RADIO-CASSETTE ESTEREOFONICO PARA AUTOMOVIL OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the bottom side of your set) in the space provided below.
1 ENGLISH PRECAUTIONS • Use only in a 12-volt DC negative-ground electrical system. • Disconnect the vehicle’s negative battery terminal while mounting and connecting the unit. • When replacing the fuse, be sure to use one with an identical amperage rating.
ENGLISH 2 ENGLISH 2 THEFT PROTECTION Take the front panel with you when leaving the car, and keep it in the supplied carrying case. Detaching the front panel Before detaching the front panel, remove the cassette to prevent possible damage to the unit.
3 ENGLISH 3 ENGLISH Adjusting sound You can select the following modes for adjusting sound depending on the music you listen to: BASS (low frequencies), TRE (high frequencies), BAL (left/right), FAD (front/rear) and H-BASS (high bass). 1 Press SEL repeatedly to select the mode to be adjusted.
ENGLISH 4 ENGLISH 4 1 Press BAND repeatedly to select the desired band (F1, F2, F3, A1, or A2). 2* Press i (to move to higher frequencies) or k (to move to lower frequencies) to tune in to a station. “ ST ” appears in the display when an FM station is broadcasting in stereo, and receiving conditions are good.
5 ENGLISH 5 ENGLISH T APE PLA YB A CK SRC g f z Playing a tape 1 Insert a cassette to start playback. If a cassette is already inserted, press SRC repeatedly to select Tape Play mode to start playback. Playback starts in the direction that the unit played back previously.
ENGLISH 6 ENGLISH 6 A UXILIAR Y EQUIPMENT Listening to a CD/MD/MP3 portable player or other equipment You can listen to equipment connected to the unit. Refer to the operating instructions for the corresponding equipment for more detailed information.
7 ENGLISH TROUBLESHOOTING Error code (when using the optional AIWA CD Changer) In the following cases the corresponding error code indication appears. Follow the suggestions below to solve the problem. If the error code indication does not disappear, consult an AIWA service center.
SPECIFICA TIONS RADIO SECTION (FM) Frequency Range: 87.5 MHz – 108 MHz Usable Sensitivity: 12.7 dBf 50 dB Quieting Sensitivity: 17.2 dBf IF Rejection: 100 dB Frequency Response: 30 Hz – 15,000 Hz .
Printed in Indonesia.
An important point after buying a device Aiwa CT-X432M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CT-X432M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CT-X432M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CT-X432M you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CT-X432M will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CT-X432M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CT-X432M.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CT-X432M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CT-X432M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
