Instruction/ maintenance manual of the product CDC-X927M Aiwa
Go to page of 10
8C-KC4-901-01 020131ATM-OX CDC- X927M YUC STEREO CAR CD RECEIVER RADIO-TOCADISCOS DE CD ESTEREOFONICO PARA AUTOMOVIL ENGLISH ESPAÑOL FRANÇAIS OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’.
T ABLE OF CONTENTS THEFT PROTECTION .............................................. 2 BASIC OPERA TION, AUDIO AND CLOCK ADJUSTMENT ..................................................... 2 RADIO OPERA TION ................................................
THEFT PROTECTION (Retractable Front Panel) When your car’s ignition switch is turned off, the front panel will be retracted automatically as if there were no car audio in the console. When the ignition switch is set to ACC or ON position, the front panel will appear automatically.
1 Press BAND repeatedly to select the desired band (F1, F2, F3, A1 or A2). 2 Press TUNE i (to move to higher frequencies) or TUNE k (to move to lower frequencies) to tune in to a station. “ST” appears on the display when an FM station is broadcasting in stereo, and receiving conditions are good.
Presetting stations automatically (Auto Memory) 1 Press BAND repeatedly to select the desired band (F1, F2, F3, A1 or A2). 2 Press and hold PS/A.ME until automatic presetting starts. “A MEM” appears on the display. The unit automatically stores up to 6 stations for each band.
5 ENGLISH Notes • When you play a CD that is already inserted, CD play starts at the point where it stopped the previous time. A newly inserted CD starts from the first track. •A CD-R or CD-RW may take some time to start playing back, but this is not a malfunction.
Remote control (back) Insulating sheet ENGLISH 6 CARD REMOTE CONTROL Names of parts BAND TAPE CD CD-CH FF REW TUNING / DISC VOLUME SKIP UP DOWN 1 BAND button 2 TAPE button (This button is not available with this unit.
One Disc Repeat Play You can play all tracks on a disc repeatedly. 1 Press REP during CD Changer play. “REP” appears on the display. To cancel Repeat Play, press REP again. One Track Repeat Play You can play a track repeatedly. 1 Press REP1 during CD Changer play.
ENGLISH 8 Reset button If a CD does not operate properly, press the reset button with a pointed object such as a pencil, etc. Note that all your settings will be erased if this button is pressed. Reset button MAINTENANCE Cleaning the front panel Wipe the surface with a soft, dry cloth.
Printed in Indonesia.
An important point after buying a device Aiwa CDC-X927M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CDC-X927M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CDC-X927M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CDC-X927M you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CDC-X927M will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CDC-X927M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CDC-X927M.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CDC-X927M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CDC-X927M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
