Instruction/ maintenance manual of the product CSD-TD28 Aiwa
Go to page of 10
CSD-TD26 CSD-TD27 CSD-TD28 CSD-TD66 8B-CHA-903-01 001220ACK-I-FM COMP ACT DISC STEREO RADIO CASSETTE RECORDER English : See page 2. En Español : V er la página 10.
2 ENGLISH Precautions Read the Operating Instructions carefully and completely before operating the unit. Be sure to keep the Operating Instructions for future reference. All warnings and cautions in the Operating Instructions and on the unit should be strictly followed, as well as the safety suggestions below.
ENGLISH 3 Power supply The OPE/BATT indicator lights up while the power is on. Using on AC house current Connect the AC cord as illustrated below. CAUTION Use only the supplied AC cord.
TAPE / POWER / 6 STANDBY RADIO /BAND A SKIP / SEARCH DOWN – TUNING – UP PLAY / PAUSE / PRESET STOP/ MEMORY FM MODE / OSC REPEAT / SLEEP 4 ENGLISH 1 Press * RADIO/BAND repeatedly to select the desired band. FM AM The power is turned on and the previously tuned station is received.
ENGLISH 5 En PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press * s STOP/MEMORY once so that “M” is displayed to store the station. A station is assigned a preset number, beginning from 1 in consecutive order for each band.
TAPE / POWER / 6 STANDBY CD B SKIP / SEARCH DOWN – TUNING – UP PLAY / PAUSE / PRESET STOP/ MEMORY FM MODE / OSC REPEAT / SLEEP 6 ENGLISH 1 Press CD. The power is turned on. 2 Press CD OPEN to open the disc compartment. Place a disc with the printed side up and close the disc compartment.
0-9, +10 REPEAT a PAUSE r , t SKIP/ SEARCH c PLAY s STOP ENGLISH 7 En PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, keep * s STOP/MEMORY pressed until “M” flashes in the display. * or s on the remote control (CSD-TD66 only) 2 Press r , t to select a track, then press s STOP/MEMORY to store it.
TAPE / POWER / 6 STANDBY RADIO / BAND QSOUND T-BASS r , t CD VOLUME N , M REPEAT / SLEEP 3-MODE EQUALIZER s STOP / MEMORY C PAUSE STOP/EJECT FF REW PLAY REC DISPLAY EQ VOL i , k r , t Use Type I (normal) tapes only.
SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. 1 Keep REPEAT/SLEEP pressed until “30” flashes in the display. 2 Within 4 seconds, press r or t to specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps.
NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
An important point after buying a device Aiwa CSD-TD28 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CSD-TD28 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CSD-TD28 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CSD-TD28 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CSD-TD28 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CSD-TD28, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CSD-TD28.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CSD-TD28. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CSD-TD28 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
