Instruction/ maintenance manual of the product CSD-TD20 Aiwa
Go to page of 8
.
8A-CH9-905-01 000205ACK-I-B CSD-TD20 CSD-TD21 COMP ACT DISC STEREO RADIO CASSETTE RECORDER K WARNING FOR USE IN THE UNITED KINGDOM This appliance is supplied with a fitted three pin mains plug. A 3 amp fuse is fitted in the plug. Should the fuse need to be replaced, use a 3 amp fuse approved by ASTA or BSI to BS1362.
2 ENGLISH WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Power Supply The 6 STANDBY OPE/BATT indicator lights up while electric current flows to the unit. Using on AC House Current Connect the AC cord as illustrated below. CAUTION Use only the supplied AC cord. Use with other cords may result in the risk of fire.
NOTE If the unit picks up noise from other electrical appliances nearby, like a TV or fluorescent lights, move the unit away. PRESETTING STATIONS You can preset up to 15 stations in each band. 1 Select a station. 2 Press s STOP/MEMORY once so that “M” is displayed to store the station.
NOTE • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc.
Use Type I (normal) tapes only. INSERTING A TAPE Press Z STOP/EJECT to open the cassette holder and insert a tape with the exposed side up and the side to be played facing out. Push the cassette holder to close. PLAYING A TAPE Press x PLAY while the power is off.
ENGLISH 7 SETTING THE SLEEP TIMER The unit can be turned off automatically at a specified time. 1 Keep SLEEP pressed until “10” flashes in the display. 2 Within 4 seconds, press r or t to specify the time until the power is turned off. Each time it is pressed, the time changes between 10 and 90 minutes in 10-minute steps.
An important point after buying a device Aiwa CSD-TD20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa CSD-TD20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa CSD-TD20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa CSD-TD20 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa CSD-TD20 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa CSD-TD20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa CSD-TD20.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa CSD-TD20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa CSD-TD20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
