Instruction/ maintenance manual of the product ADC-M105 Aiwa
Go to page of 12
OPERATING INSTRUCTIONS MANUAL DE INSTRUCCIONES MODE D’EMPLOI ADC-M105 YU COMPACT DISC CHANGER CAMBIADOR DE DISCOS COMPACTOS ENGLISH FRANÇAIS ESPAÑOL OWNER’S RECORD For your convenience, record the model number and serial number (you will find them on the rear of your set) in the space provided below.
W elcome Thank you for your purchasing this AIWA product. To optimize the performance of this unit, please read through this manual carefully. T ABLE OF CONTENTS FEATURES ................................................................................
PRECAUTIONS • Do NOT install the unit in a location where it may be subjected to: — Direct sunlight or other sources of excessive heat — Fluid, rain or moisture — Excessive dirt or dust — Excessive vibration • This unit is designed to be operated on a 12-volt DC negative-ground electrical system only.
UNP ACKING a Brackets (1 pair) Supplied mounting kit for the compact disc changer The letters are keyed to those in the instructions. Use only the supplied mounting hardware for safe and secure installation. Compact disc changer e Adhesive label (1 sheet) d Nuts (4 ea.
INST ALLA TIONS Precautions Select the mounting location very carefully, referring to the following points. • Make sure that there is no fuel tank, wiring or piping on the other side of the mounting surface. • Make sure that the installation of the unit will not hinder the movement of the deck lid or interfere with the spare tire, etc.
Horizontal installation 1 Construction For details on abc ..., see page 3. INSTALLATIONS 2 Deciding the position 3 Removing temporarily 4 Making holes in the carpet 5 Completion 5 ENGLISH Note If the mounting surface needs to be strengthened, secure the plate brackets c to the bottom surface of the car trunk, etc.
2 Deciding the position 3 Removing temporarily 4 Making holes in the carpet 5 Completion Vertical installation 1 Construction For details on abc ..., see page 3. Notes • If the mounting surface needs to be strengthened, secure the plate brackets c to the bottom surface of the car trunk, etc.
2 Making holes Slanted installation Be sure to set the mounting angle setting levers to the 45 ° position. Suspended installation When installing the unit in the trunk below the package tray, observe the following. • Select the mounting location carefully so that the unit does not hinder the movement of the torsion bars of the deck lid.
Caution Be sure to disconnect the ground wire terminal of the car battery before making a connection in order to prevent short circuiting. ENGLISH 8 This unit is designed only for AIWA brand car stereo. Therefore you cannot use the unit with other brand ’ s equipment.
How to use a compact disc magazine 1 2 3 4 HOW TO USE With the label side up, insert a disc all the way. To remove a disc, pull part A in the direction of the arrow as illustrated. Disc magazine To remove the magazine, press the z button and pull out the disc magazine.
Notes on the disc magazine • Be sure to place a disc on the disc tray with the label side up. If a disc is not set properly, it may cause damage to the unit. • The disc tray may be taken off from the magazine if you pull the tray forcibly. If the tray is taken out, put it back into the magazine as illustrated.
Printed in Indonesia 00ADCM105.YU.Cov 01.1.31, 3:52 PM 2.
An important point after buying a device Aiwa ADC-M105 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Aiwa ADC-M105 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Aiwa ADC-M105 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Aiwa ADC-M105 you will learn all the available features of the product, as well as information on its operation. The information that you get Aiwa ADC-M105 will certainly help you make a decision on the purchase.
If you already are a holder of Aiwa ADC-M105, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Aiwa ADC-M105.
However, one of the most important roles played by the user manual is to help in solving problems with Aiwa ADC-M105. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Aiwa ADC-M105 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
