Instruction/ maintenance manual of the product DA-12201 Digitus
Go to page of 3
MUL TIMEDIA HEADSET User Manual DA-12201.
Remove the protective caps and connect the headset’s jack plugs to your sound card. Make sure that the headphone connector is plugged into the speaker ourtput jack and the microphone connector is plugged into the microphone input jack of the sound card.
Adjust the length of the headband on both sides of the headset to suit the size of your head. Adjust the microphone to a distance of 2 to 3cm from your mouth.
An important point after buying a device Digitus DA-12201 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Digitus DA-12201 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Digitus DA-12201 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Digitus DA-12201 you will learn all the available features of the product, as well as information on its operation. The information that you get Digitus DA-12201 will certainly help you make a decision on the purchase.
If you already are a holder of Digitus DA-12201, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Digitus DA-12201.
However, one of the most important roles played by the user manual is to help in solving problems with Digitus DA-12201. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Digitus DA-12201 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
