Instruction/ maintenance manual of the product SmartCore Express SMA200 DIGITAL-LOGIC
Go to page of 42
TECHNIC A L US ER M A NU A L FO R: smartCore Express SMA200 Nordstrasse 11/F CH - 4542 Luterbach Tel.: ++41 (0)32 681 58 00 Fax: ++41 (0)32 681 58 01 Email: support@digitallogic.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 2 For internal use only: File: SMA200_TechMan ual_V1.0.doc Path: R:HANDBUCHs martSMA200S MA200_TechManu al_V1.0.doc COPYRIGHT 2008 BY D IGITAL -LOGIC A G This publication is protected by copyright and all rights are reserve d.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 3 Table of Content s 1. P REFACE ............ ......................................... ......................................... ......................................... .............. 4 1.1. Trademarks .......
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 4 1. P REF A CE The inf ormation contained in this manual ha s bee n carefull y c hecked a nd is believed to be ac curate; it is subject to change without notice. Product advances m ean that som e specifications m ay have c hanged.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 5 1.5. Recycling Informati on All com ponents within this product f ulfill the requirem ents of the RoHS (Restrictio n of Hazardous Substances Directive). The pro duct is soldered with a lead free pro cess. 1.6. Technical Support 1.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 6 1.8. Explanation of Symbols CE Conformity This symbol indicates that the produc t desc ribed in this manual is in complian ce with all applied CE standards . Caution, Electr ic Shock! This symbol and title warn of hazards due to electrical shocks (> 60V) when touching products or parts of them.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 7 1.9. Applicable Docume nts and Standard s The following publications are used in conjunc tion wit h this manual. W hen an y o f the referenced specifications are s uperseded by an a pproved r evision, that revision shall app ly.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 8 Sm art Battery Data Specifi cation Revision 1.1, December 11, 1998. www.sbs-forum .org System Management Bus (SMBus) Specif ication Versi on 2.0, August 3, 2000 Cop yright © 1994, 1995 , 1998, 2000 Duracell, Inc.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 9 RoHS is often refer red to as the "lead-f ree" directive but it r estricts the use of the following subs tances: Lead Mercur y Cadm ium Chrom ium VI PBB and PBDE The maximum allowable concentration of any of the above mentioned substances is 0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 10 1.12. Swiss Qualit y 100% Mad e in Switzerland DIGIT AL-LOGIC is a m ember of "Swiss-Labe l" T his product was not manuf actured by empl.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 11 2. O VERVIEW 2.1. Standard Features The sm artCoreExpress i s an electrical an d mec hanical definition for a CO M or C omputer on Module (miniaturized PC system), based on Intel's ATOM chip unit incorpor ating the m ajor ele m ents of a PC compatible com puter.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 12 2.2. Technical Speci fications CPU Specification CoreDuo / Celero n M Intel Atom 510 1.10GHz with 0.5 MB L2-cache Intel Atom 530 1.60GHz with 0.5 MB L2-cache Clock 1.1 or 1.6GHz 1 st Level Cache 2x 32kByte 2 nd Level Cache 0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 13 Intel US15W Specification PCIe BUS 2x x1 Lane EIDE BUS 1x Ultra P-ATA 100 SATA BUS - USB V2.0 8 channel USB APIC INTEL I/O APIC SMB V2.0 SMBus contro ller FWH FirmW are Hub for BIOS devices LPC Serialized BUS (no I SA) used for externa l SuperI/O Sound AC97 2.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 14 Operating Environmen t Specification Relative Hum idity 5-90% non-condens ing Vibration 5 to 2000 Hz Shock 10 G Operating Tem perature Standard: t.b.d. (depe nds on the CPU an d the cooling c oncept) Extended Range: t .
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 15 3. D IMENSIONS & D I A GR A MS 3.1. Block Diagram Temp . Sensor Intel Atom Processor CPU (power suppl y) Power Management Microcontroller FSB 1 GB DDR2 RA.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 16 Design IN w ith the smartModule Attention! W hen using an active/passive heats ink that is not from DLAG, be ver y careful! The maximum depth th e screw s can go into the produ ct is 3mm or the m odule w ill be destroyed! 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 17 3.3. Connector Plac ement & Pin Definition o n the Carrier Board View of the T op Side (mountin g side) of the smartCoreE xpress PCB: d=2.2/D=4.5 3.6mm A1 A2 A3 ... B1 A110 B110 0.5 0.3 1.8 1.6 0.4 d=1.0 d=1.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 18 3.4. Photo of the To p Side of the PCB Pin 1 65mm 58mm.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 19 3.5. Dimensions of t he Carrier Board Co nnector SMX-CON8: Standard Height: 5.0mm (Availab le alternative: 8.0m m) DLAG Part Nr: 807138 AMP/T y co: 8-6318491-6 (Components plac ed below the sm artModule should to tal a maximum of 2.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 20 4. COM-E XPRESS C ONNECT OR D ESCRIPTION 4.1. Signal Terminol ogy Descriptions Signal Description PU Internally im plemented pull up resistor PD Internally im plemented pull down resistor I/O 3.3V Bi-directional signa l 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 21 4.2. smartCoreExpre ss Connector Pinout BUS on the smartCo reExpress – Conn ectors A / B: Pins 1-55 Pin Signal BUS Type Remarks Pin Signal BUS Type Remarks .
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 22 BUS on the smartCo reExpress – Conn ectors A / B: Pins 56-110 Pin Signal BUS Type Remarks Pin Signal BUS Type Remarks A56 SMB_CLK SMB 3.3V bidir B56 SPI_MISO SPI 3.3V Bidir. A57 SMB_DAT SMB 3.3V bidir B57 SPI_MOSI SPI 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 23 5. S IGNAL D ESCRIPTIONS OF THE SM A RT C OR E E XPRESS 5.1. Wire Design for T ypical Impedances 5.2. Matching of the Differential Pair s.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 24 5.3. Placing an AC Coupling Capac itor on each PCIe-TX In the sm artCoreExpress module, all P CI-TX pairs alre ady include the series AC capacitors.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 25 5.4. smartCoreExpre ss Signal Groups 5.4.1. PCI-Express Signal BUS T ype Desc ription On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm PCIe_Tx [0-4] +/- PCIe Dif Out Transm itter 2.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 26 5.4.2. SDVO Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm SDVO_CTRLCLK SDVO DDC signal PU 4.7k to 3.3V 55 SDVO_CTRLDAT SDVO DDC signal PU 4.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 27 5.4.3. LVDS Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm LVDS_DDCCLK LVDS 3.3V DDC signal PU 10k to 3.3V - 150 55 LVDS_DDCDAT LVDS 3.3V DDC signal PU 10k to 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 28 5.4.4. USB Signal BUS T ype Desc ription On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm USB_[0..7] +/- USB Dif Differ ential USB data signal pair - - 300 100 0.2 USB_OC[0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 29 5.4.5. Par allel A T A Signal BUS Type Description On Modu le Terminatio n Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm PATA_D[15..0] CMOS 5V I/O IDE data signals Series 33 - 100 55 - PATA_A[0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 30 5.4.6. LPC BUS Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm LPC_FRAME# CMOS 3.3V Out Connect to the LPC device - - 100 55 - LPC_AD[3..
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 31 5.4.7. SM Bus Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm SMB_ALERT # CMOS 3.3V In Connect to the SM B device PU 10k to 3.3V - 200 55 - SMB_DATA CMOS 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 32 5.4.8. HD A Audio Interface Signal BUS Type Desc ription On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm HDA_DOCKEN# CMOS 3.3V Out HAD dock enable. This signal contro ls the external HD aud io docking isolation logic.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 33 5.4.9. SD / SDIO Interface Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm SD0_CD# CMOS 3.3V Out Connect to an SDIO device or card. PU 10k to 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 34 5.4.10. SPI BUS Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm SPI_MISO CMOS 3.3V In Connect to the SP I device. - 150 55 - SPI_MOSI CMOS 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 35 5.4.11. SATA Interface (Option) Signal BUS Type Descript ion On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm SATA_Tx[0..3] SATA Dif SATA transm itter pair Series 10nF 100 100 - SATA_Rx[0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 36 5.4.12. GLAN Signal BUS T ype Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm GLAN_TX +/- GLAN Dif GLAN T X pair for 1GE - 100nF 250 95 0.5 GLAN_RX +/- GLAN D if GLAN RX p air for 1GE - 100nF 250 95 0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 37 5.4.13. CAN / Serial Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm CAN_TX CMOS 3.3V Out Serial output. Res . - - - - CAN_RX CMOS 3.3V In Serial input.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 38 5.4.14. PM Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm W AKE# CMOS 3.3V In To wakeup the s ystem, this input m ust be pulled to GND. PU 1k0k 3.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 39 5.4.15. Supply Signal BUS Type Description On Modu le Termination Ext. Ter- mination Needed Max. Length in mm Ohm Matched Length in mm +5Volt PW R In 5V power su pply input. Switched with th e sus4signal - - - - - +5V Always PW R In 5V Alwa ys available.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 40 6. SM A R T C ORE -E XPRESS C ONNECTOR S PECIFICA TIONS The connector t ype is e qual t o the COMexpress con nector. T his is a 220pin, s urface-mounted connector with 0.5mm pitch. Parameter Co ndition Specification Contact Copper allo y Material Housing Thermoplast m olded compound LC P Current 0.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 41 7. SM A R T C ORE -E XPRESS VERSUS COM EXPRESS The smartCoreExpres s supports sm all footprints and especiall y mobile applicat ions. It is powered by the modern Intel Atom CPU technolog y. To select the correc t module, this chapter compares the different PCIe-based module concepts.
DIGITAL-LOGIC AG SM A 200 Manu al V1.0 42 8. I NDEX A AC Coupling Capacitor............................................... 24 B Block Diagram ............................................................ 15 BUS .........................................
An important point after buying a device DIGITAL-LOGIC SmartCore Express SMA200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DIGITAL-LOGIC SmartCore Express SMA200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DIGITAL-LOGIC SmartCore Express SMA200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DIGITAL-LOGIC SmartCore Express SMA200 you will learn all the available features of the product, as well as information on its operation. The information that you get DIGITAL-LOGIC SmartCore Express SMA200 will certainly help you make a decision on the purchase.
If you already are a holder of DIGITAL-LOGIC SmartCore Express SMA200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DIGITAL-LOGIC SmartCore Express SMA200.
However, one of the most important roles played by the user manual is to help in solving problems with DIGITAL-LOGIC SmartCore Express SMA200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DIGITAL-LOGIC SmartCore Express SMA200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
