Instruction/ maintenance manual of the product CC500M Diamond Power Products
Go to page of 7
DIAMOND P R O D U C T S Oper a tor’ s Manual Cor e Cut MASONR Y SA W MODEL: CC500M Part#: 1800739.
SAFETY PRECAUTIONS Note: Failure to comply with following w arnings could result in serious bodily injury ! 1. Read and understand operator’s manual before operating saw. 2. Keep guards in place and in good condition when saw is in operation. 3. Always wear approved ear, eye, head and respiratory protection.
OPERATING INSTRUCTIONS 1. Set saw frame on a sturdy, level surface. If using standard legs, insert them in square tubes under saw frame. Tighten wing screws before allowing frame’s weight to rest on legs. This will prevent the saw frame from wobbling on the legs, possibly cocking them in different directions, which will impair saw stability.
5. For Saws With Electric Motors: Connect motor to a properly grounded outlet. Motor may be operated on 115 or 230 volts. Set switch on motor capacitor housing to match desired voltage. Plug on motor cord must also be changed to match correct voltage.
b) Clamp or hold material firmly agains t the conveyor cart measuring stop. CAUTION: If material being cut is allowed to slip, blade may bind, damaging it.
5. Ensure that extension cord gauge matches its length, as shown in chart. Undersize extension cords may damage motor. Whenever possible, use 230 volts.
SPECIFICATIONS Blade capacity: 14” Maximum Depth of Cut: 5” Arbor Size: 1” Blade drive: Matched set of 2 premium V-belts Models: CC515M-E1 Baldor Electric Motor, Spec. #35N301X136G1 1.5 Hp - 1 Phase, Totally Enclosed Fan Cooled 115/230 Volts, 60 Hz 13.
An important point after buying a device Diamond Power Products CC500M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Diamond Power Products CC500M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Diamond Power Products CC500M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Diamond Power Products CC500M you will learn all the available features of the product, as well as information on its operation. The information that you get Diamond Power Products CC500M will certainly help you make a decision on the purchase.
If you already are a holder of Diamond Power Products CC500M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Diamond Power Products CC500M.
However, one of the most important roles played by the user manual is to help in solving problems with Diamond Power Products CC500M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Diamond Power Products CC500M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
