Instruction/ maintenance manual of the product ASOHOVIA Airlinkplus
Go to page of 9
32 - bit PCI - Bus 10/100Mbps ACPI Fast Ethernet Card User ’ s Guide.
2 FCC Class B Certification This equipment has been tested and found to comply with the regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are des igned to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
3 Introduction Thank you for choosing the 32 - bit PCI - Bus 10/100Mbps ACPI Fast Ethernet Card, this card is auto - configurable upon power up and also supports auto - negotiation to automatically select the optimum speed and communication mode of an attached device.
4 Remote LAN Wakeup Remote LAN Wakeup capability is a key feature of a centrally managed PC environment. This technology allows networked PCs to be powered up and managed from a central location, at any time of the day or night.
5 Product Featues Designed for versatility and performance, the 32 - bit PCI bus 10/100Mbps Fast Ethernet Adapt er provides the following fe a tures: • Compliant to IEEE 802.3, 10BASE - T standard • Complaint to IEEE 802.3u 100BASE - TX standard • Compliant to IEEE ANSI/802.
6 Installation Installation the 10/100Mbps PCI bus Fast Ethernet Card requires Hardware installation first, then BIOS and Software instal lation. Step 1, Hardware Installation 1. Switch off the computer, unplug the power cord, and remove the computer’s cover.
7 Step 2, BIOS Configuration Due to a fault in some Plug - n - Play BIOS pr ograms, it happens occasionally that a newly installed adapter is assigned an Interrupt Number which is a l ready assigned to another device. In such a case, the conflict of Interrupt Number will cause faults in the behavior of both devices.
8 Troubleshooting If you experience any problems with the adapter, first verify that the appropriate driver is loaded, that the proper grade of cable is employed for the network connection, and that the supporting hub is functioning properly. 1. Ascertain that the adapter card is fully and firmly seated in the slot connector.
9 Specifications Standards: IEEE 802.3 10BASE - T IEEE802.3u 100BASE - TX ANSI/ IEEE 802.3 Auto - negotiation IEEE 802.3x Full Duplex flow control PCI Local Bus Rev.
An important point after buying a device Airlinkplus ASOHOVIA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlinkplus ASOHOVIA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlinkplus ASOHOVIA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlinkplus ASOHOVIA you will learn all the available features of the product, as well as information on its operation. The information that you get Airlinkplus ASOHOVIA will certainly help you make a decision on the purchase.
If you already are a holder of Airlinkplus ASOHOVIA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlinkplus ASOHOVIA.
However, one of the most important roles played by the user manual is to help in solving problems with Airlinkplus ASOHOVIA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlinkplus ASOHOVIA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
