Instruction/ maintenance manual of the product DW 718 DeWalt
Go to page of 7
INSTRUCTION MANUAL D E WAL T Industrial T ool Co., 701 Joppa Road, Baltimore, MD 21286 (AUG09) Part No. N039242 DW718 Copyright © 2005, 2007, 2009 D E WAL T The following are trademarks for one or mo.
WARNING: Do not connect unit to electrical power source until complete instructions are read and understood. WARNING: Always wear proper personal hearing protection that conforms to ANSI S12.6 (S3.19) during use. Under some conditions and duration of use, noise from this product may contribute to hearing loss.
45º bevel - Left Max. Height 2.4" (61 mm) Result Width 12.9" (328 mm) Max. Width 13.6" (345 mm) Result Height 1.9" (48 mm) 45º bevel - Right Max. Height 1.7' (43 mm) Result Width 12.9" (328 mm) Max. Width 13.6" (345 mm) Result Height 1.
Tighten the center nut. The 45º bevel stops requir e adjustment after the bevel square to table adjustment is complete. BEVEL POINTER (FIG. 8) If the bevel pointers do not indicate zero, loosen each scr ew that holds each bevel pointer in place and move them as necessary .
WARNING: Always use eye protection. All users and bystanders must wear eye protection that conforms to ANSI Z87.1 (CAN/CSA Z94.3). Plug the saw into any household 60 Hz power source. Refer to the nameplate for voltage. Be sure the cor d will not interfere with your work.
BEVEL SETTING TYPE OF CUT 33.85° Right RIGHT SIDE, INSIDE CORNER: 1. T op of molding against fence. 2. Miter table set at left 31.62° 3. Save right end of cut 33.85° Right LEFT SIDE, OUTSIDE CORNER: 1. T op of molding against fence. 2. Miter table set at left 31.
10 10 10 20 20 20 30 30 30 40 40 40 50 50 50 60 60 60 70 70 70 80 80 80 T ABLE 1: COMPOUND MITER CUT (POSITION WOOD WITH BROAD FLA T SIDE ON THE T ABLE AND THE NARROW EDGE AGAINST THE FENCE) SET THIS .
An important point after buying a device DeWalt DW 718 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt DW 718 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt DW 718 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt DW 718 you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt DW 718 will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt DW 718, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt DW 718.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt DW 718. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt DW 718 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
