Instruction/ maintenance manual of the product DCD710S2 DeWalt
Go to page of 16
www . .eu DCD710.
2 Dansk (oversat fra original brugsvejledning) 4 Deutsch (übersetzt von den Originalanweisungen) 16 English (original instructions) 29 Español (traducido de las instrucciones originales) 40 Françai.
1 Figure 1 b a e c g f d i h Figure 2 g j.
2 c d Figure 6 Figure 3 Figure 4 Figure 5 f g.
3 Figure 7 Figure 8.
ENGLISH 29 10.8 V CORDLESS ADJUST ABLE CLUTCH DRILL/ DRIVER DCD710 Congratulations! Y ou have chosen a D E WAL T tool. Y ears of experience, thorough pr oduct development and innovation make D E W AL T one of the most reliable partners for professional power tool users.
ENGLISH 30 Denotes risk of electric shock. Denotes risk of fire. EC-Declaration of Conformity MACHINERY DIRECTIVE DCD710 D E W AL T declares that these products described under T echnical Data are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-1, EN 60745-2-2.
ENGLISH 31 tool. Carr ying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. d) Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury .
ENGLISH 32 These are: – Impairment of hearing. – Risk of personal injur y due to flying particles. – Risk of burns due to accessories becoming hot during operation. – Risk of personal injur y due to prolonged use. Markings on T ool The following pictograms are shown on the tool: Read instruction manual before use.
ENGLISH 33 • The charger is designed to operate on standard 230V household electrical power . Do not attempt to use it on any other voltage. This does not apply to the vehicular charger . SA VE THESE INSTRUCTIONS Chargers The DCB100 and DCB105 chargers accept 10.
ENGLISH 34 T oxic fumes and materials are created when lithium ion battery packs are burned. • If batter y contents come into contact with the skin, immediately wash area with mild soap and water . If battery liquid gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases.
ENGLISH 35 d. Gear shifter e. Keyless chuck f. Battery release button g. Battery pack h. Worklight INTENDED USE This drill/driver is designed for light fastening and drilling applications. DO NOT use under wet conditions or in presence of flammable liquids or gases.
ENGLISH 36 before making any adjustments or removing/installing attachments or accessories. Proper Hand P osition (fi g. 1, 8) WARNING: T o reduce the risk of serious personal injury , ALW A YS use proper hand position as shown. WARNING: T o reduce the risk of serious personal injury , ALW A YS hold securely in anticipation of a sudden reaction.
ENGLISH 37 Be sure to tighten chuck with one hand on the chuck sleeve and one hand holding the tool for maximum tightness. CHUCK REMOV AL (FIG. 6) T urn the adjustment collar to the “drill” position and gear shifter to position 1 (low speed). Tighten the chuck around the shorter end of a hex key (not supplied) of 6.
ENGLISH 38 the lock-off position or turn tool off and disconnect battery pack before making any adjustments or removing/installing attachments or accessories. The charger and battery pack are not serviceable. There ar e no serviceable parts inside. Lubrication Y our power tool requires no additional lubrication.
ENGLISH 39 GUARANTEE D E W AL T is confident of the quality of its products and of fers an outstanding guarantee for professional users of the pr oduct. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user .
An important point after buying a device DeWalt DCD710S2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt DCD710S2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt DCD710S2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt DCD710S2 you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt DCD710S2 will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt DCD710S2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt DCD710S2.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt DCD710S2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt DCD710S2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
