Instruction/ maintenance manual of the product 43-460 DeWalt
Go to page of 16
INSTRUCTION MANUAL P ART NO. 432-02-651-0041 - 05-10-04 Copyright © 2004 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 Indicates an imminently hazardous situation which, if not avoided, will r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, could r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, may r esult in minor or moderate injury .
3 GENERAL SAFETY RULES 1. FOR YOUR OWN SAFETY , READ THE INSTRUCTION MANUAL BEFORE OPERA TING THE MACHINE. Learning the machine’ s application, limitations, and specific hazards will gr eatly minimize the possibility of accidents and injury . 2. WEAR EYE PROTECTION.
4 04-24-03 1. DO NOT OPERA TE THIS MACHINE UNTIL it is assembled and installed accor ding to the instructions. 2. OBT AIN ADVICE from your supervisor, instructor , or another qualified person if you are not familiar with the operation of this machine.
5 Do not expose this machine to rain or operate the machine in damp locations. POWER CONNECTIONS MOTOR SPECIFICA TIONS This machine is not supplied with a power cord, and must be be permanently connected to the building electrical system and grounded accor ding to the National Electrical Code and/or local codes and ordinances.
6 For your own safety , do not connect the machine to the power source until the machine is completely assembled, and you read and understand the entir e instruction manual. A TT ACHING SPINDLE RAISING AND LOWERING HANDWHEEL 1. Insert the key (A) Fig.
7 Fig. 8 A TT ACHING T ABLE INSERTS Three table inserts ar e provided for various size cutters (Fig. 8). The lar ge insert is adjustable. T o set it flush with the table: 1. Remove the three slotted head scr ews (A) Fig. 8. 2. Use a screwdriver to turn the three adjusting scr ews (B) Fig.
8 A TT ACHING ELECTRICAL BOX TO CABINET The tool is shipped with the starter box wired to the switch and motor and must be mounted to the shaper cabinet. Install three 1/4-20 x 1/2" hex head scr ews with lockwashers through the r ear of the tool (A) Fig.
9 Using the fence is the safest and most satisfactory method of shaping. Most straight work can be shaped using the fence described below . 1. For average work, where a portion of the original edge of the work is not touched by the cutter , both the front and rear fences ar e in a straight line (Fig.
10 POSITION OF COLLARS 1. The collars may be used in any of three positions: above, below , or between two cutters. 2. When the collar is used below the cutter (Fig. 29), the operator can see the progr ess of the cut. NOTE : Any accidental lifting of the work will gouge the wood and ruin the workpiece.
11 ST AR TING PIN 1. The machine is supplied with a tapered starting pin (A) Fig. 34, which is used as a support when starting the cut. The starting pin (A) is placed in one of the tapered holes (B) in the table. 2. Place the work in the first position using the guide pin as a support (Fig.
12 P ARTS, SERVICE OR W ARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standards and ar e serviced by a network of Porter -Cable • Delta Factory Service Centers and Delta Authorized Service Stations.
13 T wo Y ear Limited New Product W arranty Delta will repair or r eplace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to.
14 NOTES.
15 NOTES.
The following are trademarks of POR TER-CABLE • DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de la POR TER-CABLE • DEL T A): Auto-Set ® , BAMMER ® , B.O.S.
An important point after buying a device DeWalt 43-460 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought DeWalt 43-460 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data DeWalt 43-460 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, DeWalt 43-460 you will learn all the available features of the product, as well as information on its operation. The information that you get DeWalt 43-460 will certainly help you make a decision on the purchase.
If you already are a holder of DeWalt 43-460, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime DeWalt 43-460.
However, one of the most important roles played by the user manual is to help in solving problems with DeWalt 43-460. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device DeWalt 43-460 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
