Instruction/ maintenance manual of the product AR670W Airlink101
Go to page of 14
150N Draf t 802.1 1n Wireless Router Model # AR670W Quick Inst allation Guide Ve r. 1 A.
This Quick Installation Guide only provides the basic instructions. For more detailed information, please refer to the User ’ s Manual on the supplied CD. Note: Prior to connecting the router , be sure to power of f your computer , DSL/Cable modem, and the router .
Section 2 Step 1 Go to Start , Run , type command (for Windows 95/98/ME) or cmd (for Windows 2000/XP) and click OK . Y ou will see the command prompt as below . Step 2 T ype ping 192.168.1.1 and press Enter . Y ou should get four reply responses back.
Step 5 T ype ipconfig/renew and press Enter . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254). Proceed to Section 3, Configuring the Router . If you don’t get an IP address, reset the router by holding in the reset button on the back of the router for 10 seconds while it is ON and try ipconfig/renew again.
Step 8 After your IP address is released, click Renew . Y ou should get an IP address of 192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset the router by holding in the reset button on the back of the router for 10 seconds while it is ON and try Renew again.
Cable Modem For most cable modem users, you should be able to connect to the Internet without any configuration. If your ISP has provided you with a host name, enter it in the optional Host Name field. Click on the Clone MAC Address button. Click Apply and OK to save the settings.
Step 2 Enter your username and p assword provided by your ISP . DSL For DSL users, follow the steps below to configure the router . Step 1 Select PPPoE from the drop-down menu. Note: Depending on the ISP , you may need to include the domain name with your username.
Connecting the Router Wirelessly Below are the default wireless settings of the router . Y ou must configure your wireless network card to the same settings in order to establish a wireless connection to the router . Please refer to your wireless network card’s manual on how to configure these settings.
Section 5 (Optional) Wi-Fi Protected Setup Wi-Fi Protected Setup™ ( WPS ) is a new and easy way to configure the encryption for your wireless network clients. In order to use it with your router , firstly , you must configure the wireless encryption on the router .
Step 2 Choose your configuration method, either Push Button or Pin Code , and click Next . Step 3a Write down the PIN if you choose Pin Code method and click Next .
Step 4 Go to your routers configuration screen and click on Wireless . Then click Wireless security . Make sure that the Wi-Fi Protected Setup Enable box is checked. Then click the Add Wireless Device Wizard button. If you are using Pin Code method, enter the Pin Code in the Pin Number box and click connect .
Step 6 Click Continue on the router configuration screen. After a few moments both the router configuration screen and the adapter configuration screen should show a message telling you that you are connected. Step 5 Click Finish on the adapter screen.
Section 6 T roubleshooting If you have trouble connecting to the Internet, try the following steps. Step 1 Power of f the Cable/DSL modem, router , and computer and wait for 5 minutes . Step 2 T urn on the Cable/DSL modem and wait for the lights on the modem to settle down.
Section 7 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com *Theoretical maximum wireless signal rate derived from IEEE 802.1 1g standard and IEEE 802.1 1n draft specification version 2.0. Actual data throughput will vary .
An important point after buying a device Airlink101 AR670W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AR670W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AR670W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AR670W you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AR670W will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AR670W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AR670W.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AR670W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AR670W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
