Instruction/ maintenance manual of the product AR625W Airlink101
Go to page of 9
Rev . 1.0 Quick Inst allation Guide Model # AR625W 300N Draf t 802.1 1n Wireless Router.
Section 1 Connecting the Router Note: Prior to connecting the router , be sure to power off your computer , DSL/Cable modem, and the router . T o achieve maximum wireless coverage, tilt the router ’s antennas outward at 45° angle.
Section 2 Configuring the Router Step 1 Open the web browser (Internet Explorer or Netscape), type 192.168.1.1 in the Address bar and press Enter . Step 2 Enter admin for both the username and password fields and click OK .
Cable Modem For most cable modem users, you should be able to connect to the Internet without any configuration. If your ISP has provided you with a host name, enter it in the optional Host Name field.
DSL For DSL users, follow the steps below to configure the router . Step 1 Select PPPoE from the drop-down menu. S tep 2 Enter your username and password provided by your ISP . Note: Depending on the ISP , you may need to include the domain name with your username.
Section 3 Connecting to the Router Wirelessly Below are the default wireless settings of the router . Y ou must configure your wireless network card to the same settings in order to establish a wireless connection to the router . Please refer to your wireless network card’s manual on how to configure these settings.
Section 4 V erifying Connection Step 1 Power of f the Cable/DSL modem, router , and computer and wait for 5 minutes . Step 2 T urn on the Cable/DSL modem and wait for the lights on the modem to settle down. Step 3 T urn on the router and wait for the light s on the router to settle down.
Section 5 T echnical Support E-mail: support@airlink101.com T oll Free: 1-888-746-3238 Web Site: www .airlink101.com.
*Theoretical maximum wireless signal rate derived from IEEE 802.1 1g standard and IEEE 802.1 1n draft specification version 1.0. Actual data throughput will vary . Network conditions and environmental factors, including volume of network traffic, building materials and construction, mix of wireless products used, radio frequency interference (e.
An important point after buying a device Airlink101 AR625W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Airlink101 AR625W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Airlink101 AR625W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Airlink101 AR625W you will learn all the available features of the product, as well as information on its operation. The information that you get Airlink101 AR625W will certainly help you make a decision on the purchase.
If you already are a holder of Airlink101 AR625W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Airlink101 AR625W.
However, one of the most important roles played by the user manual is to help in solving problems with Airlink101 AR625W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Airlink101 AR625W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center