Instruction/ maintenance manual of the product AVR-3805 Denon
Go to page of 15
- 1 - DENON AVR/AVC control protocol Ver. 4.0 Application model : AVR - 3805/AVC - 3890 Application terminal : RS - 232C Connector specification Connector type : DB - 9pin female type, slave straight .
- 2 - Protocol specification The following three data form s is defined. COMMAND : The message sent to a system (AVR/AVC) from a controller (Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.
- 3 - The example of a command * <CR> is the meaning o f 0x0D. SIDVD<CR> : Select Input source DVD MSTHX SURROUND EX<CR> : surround Mode Set to THX SURROUND EX MVUP<CR> : Maste.
- 4 - Others A) COMMAND is receivable also during transmission of EVENT . B) Since CHANNEL VOLUME changes simultaneously when the SURROUND MODE changes, the value of the channel volume of all channels returns as EVENT . C) CH ANNEL VOLUME returns the data of ALL channels by the present SURROUND MODE also including an intact channel.
- 5 - COMMAND and PARAMETER list COMMAND PARAMETER function e xample PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> MV UP MASTER VOLUME UP/DOWN , direct change to **dB MVUP&l.
- 6 - COMMAND PARAMETER function e xample CV SB UP --- SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR> SB ** **:38 to 62 by ASCII , 50=0dB CVSB 50<CR> MU ON OUTPUT MUTE .
- 7 - COMMAND PARAMETER function e xample Z2 PHONO MULTI ZONE - 2 mode set , and select source at AVR - 3805 Z2PHONO<CR> | --- The name of PARAMETER is | CDR/TAPE1 the same as that of the time of SI COMMAND.
- 8 - EVENT PARAMETE R function e xample MS DIRECT SURROUND mode set MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO MSSTEREO<CR> MULTI CH IN MSMULTI CH IN<CR> MULTI CH DIREC.
- 9 - TF, TP, TM COMMAND : '*' parameters can NOT op erate when INPUT source isn ’ t TUNER. EVENT PARAMETER function e xample MS MPEG2 AAC --- Invalid at AVR model MSMPEG2 AAC<CR> AA.
- 10 - EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function e xample *RES. PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> MV ** MASTER VOLUME change , **:00 to 98 b.
- 11 - EVENT PARAMETER function e xample *RES. ZM ON MAIN - ZONE ON/OFF change ZMON<CR> OFF ZMOFF<CR> Z1 PHONO MULTI ZONE - 3 source change Z1PHONO<CR> | --- The name of PARAMETER is | CDR/TAPE1 the same as that of the time of SI COMMAND.
- 12 - EVENT PARAMETER function e xample *RES. TF ****** (6 digits) TUNER Frequency change TF105000<CR> --- ****.** kHz at AM band (1050.00kHz at AM) ****.** M Hz at FM band TP **(PRESET No.) TUNER PRESET change to No.** TPA1<CR> (PRESET No.
- 13 - EVENT PARAMETER function e xample *RES. MS DIRECT SURRO UND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO MSSTEREO<CR> MULTI CH IN MSMULTI CH IN<CR> MULT.
- 14 - EVENT PARAMETER function e xample *RES. DTS NEO:6 CINEMA MSDTS NEO:6 C<CR> DTS NEO:6 MUSIC MSDTS NEO:6 M<CR> DTS SURROUND MSDTS SURROUND<CR> DTS ES DSCRT6.
- 15 - *RES. : NOT returns ' ? ' parameters as RESPONSE . EVENT PARAMETER function e xample *RES. PS ROOM EQ:NORMAL ROOM EQ mode change PSROOM EQ:NORMAL<CR> ? ROOM EQ:FRONT PSROOM EQ:F.
An important point after buying a device Denon AVR-3805 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Denon AVR-3805 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Denon AVR-3805 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Denon AVR-3805 you will learn all the available features of the product, as well as information on its operation. The information that you get Denon AVR-3805 will certainly help you make a decision on the purchase.
If you already are a holder of Denon AVR-3805, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Denon AVR-3805.
However, one of the most important roles played by the user manual is to help in solving problems with Denon AVR-3805. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Denon AVR-3805 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
