Instruction/ maintenance manual of the product 50-851 Delta
Go to page of 12
INSTRUCTION MANUAL 2 H.P . Single-Stage Dust Collector (Model 50-851) P ART NO. 902114 - 07-01-02 Copyright © 2002 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 GENERAL SAFETY RULES W oodworking can be dangerous if safe and pr oper operating procedur es ar e not followed. As with all machinery , ther e are certain hazar ds involved with the operation of the pr oduct. Using the machine with respect and caution will considerably lessen the possibility of personal injury .
3 ADDITIONAL SAFETY RULES FOR DUST COLLECTORS WARNING: F AILURE TO FOLLOW THESE RULES MA Y RESUL T IN SERIOUS PERSONAL INJUR Y . 1. DO NOT OPERA TE THIS MACHINE until it is assembled and installed according to the instructions.
4 Fig. 2 Fig. 3 Fig. 2 1 - Blower and motor assembly 2 - Eight-hole rubber gasket 3 - T en-hole rubber gasket 4 - Base 5 - Intake Port Caps (3) 6 - Intake Ports 7 - Support Drum Fig.
5 Fig. 4 Fig. 5 Fig. 6 Fig. 7 ASSEMBLING CASTER ASSEMBLIES TO BASE 1. Align the holes in swivel caster assembly (A) Fig. 4, with four holes in caster bracket (B) located on the underside of base (C).
6 Fig. 8 Fig. 9 Fig. 10 Fig. 11 5. Place ten-hole rubber gasket (J) Fig. 8, on blower flange (H). Align holes in gasket with mounting holes in blower flange and press gasket onto flange as shown. 6. Align mounting holes in chute (K) Fig. 9, with holes in gasket (J), which was assembled in STEP 5.
7 Fig. 12 Fig. 13 Fig. 14 Fig. 15 8. Align mounting holes in drum (N) Fig. 12, with gasket (M), which was assembled in STEP 7. Place a 5/16" lockwasher onto a 5/16-18x5/8" hex head screw , insert screw (P) Fig. 13 thr ough chute (K), thr ead screw into drum (N) and tighten securely .
8 Fig. 16 Fig. 17 Fig. 18 Fig. 19 12. Assemble the other end of drum support arm (T) Fig. 16, to base (B). Place a 5/16" lockwasher onto a 5/16-18x5/8" hex head screw (W), insert the hex head screw thr ough drum support arm (T), and thr ead into base (B).
9 Fig. 20 Fig. 21 Fig. 22 Fig. 24 Fig. 23 3. Position open end of filter bag (A) Fig. 20, over upper lip of support drum (E). Insert locking band (F) Fig. 20, through the loops of filter bag (A) and fasten with clamp (G) a s shown in Fig. 21. NOTE: Make certain locking band (F) Fig.
10 Fig. 25 3. Three dust intake port caps (D) Fig. 25, are suppl ie d with the dust collector . NOTE: These caps should be inserted into the intake ports as shown, when they are not in use. WARNING: DO NOT INSER T FINGERS OR ANY FOREIGN OBJECT INTO THE DUST INT AKE PORTS WHEN UNIT IS OPERA TING.
11 OPERA TING CONTROLS ON/OFF SWITCH The “on/off” switch is located on the side of the motor . T o tur n the dust collector “ON”, push the start button (A) Fig.
The following are trademarks of POR TER-CABLE · DEL T A (Las siguientes son marcas r egistradas de PORTER-CABLE S.A.): Auto-Set ® , BAMMER ® , B.O.S.
An important point after buying a device Delta 50-851 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 50-851 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 50-851 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 50-851 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 50-851 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 50-851, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 50-851.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 50-851. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 50-851 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center