Instruction/ maintenance manual of the product 50-760 Delta
Go to page of 16
INSTRUCTION MANUAL 1 1 / 2 H.P . Dust Collector (Model 50-760) P AR T NO. A03569 - 05-12-05 Copyright © 2005 Delta Machinery T o learn more about DEL T A MACHINER Y visit our website at: www .deltamachinery .com. For Parts, Service, W arranty or other Assistance, please call 1-800-223-7278 ( In Canada call 1-800-463-3582).
2 T ABLE OF CONTENTS Read and understand all warnings and operating instructions before using any tool or equipment. When using tools or equipment, basic safety precautions should always be followed to r educe the risk of personal injury .
3 Indicates an imminently hazardous situation which, if not avoided, will r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, could r esult in death or serious injury . Indicates a potentially hazardous situation which, if not avoided, may r esult in minor or moderate injury .
4 GENERAL SAFETY RULES READ AND UNDERST AND ALL WARNINGS AND OPERA TING INSTRUCTIONS BEFORE USING THIS EQUIPMENT . Failure to follow all instructions listed below , may result in electric shock, fire, and/or serious personal injury or pr operty damage.
5 A separate electrical circuit should be used for your machines. This cir cuit should not be less than #12 wire and should be protected with a 20 Amp time lag fuse. If an extension cor d is used, use only 3-wire extension cords which have 3- prong gr ounding type plugs and matching receptacle which will accept the machine’ s plug.
6 EXTENSION CORDS Use proper extension cor ds. Make sure your extension cord is in good condition and is a 3-wir e extension cord which has a 3-pr ong grounding type plug and matching receptacle which will accept the machine’ s plug. When using an extension cord, be sure to use one heavy enough to carry the current of the machine.
7 FOREWORD The Delta Industrial Model 50-760 Dust Collector will connect to woodworking machines that accept a 4" diameter hose. The 50-760 comes with one 1 micron filter bag and two 6 mil plastic collection bag, and a 4" x 5 ft. collection hose.
8 11 12 13 14 15 16 17 18 Fig. 1B 19 11. Hose clamp (2) 12. Intake cap and ring (2) 13. Bracket for bag hanging rod 14. Knob for attaching legs to blower/motor assembly (4) 15. 3/8” (9.5mm) Lockwasher for attaching casters to stand (4) 16. 5/16” Small flat washers for attaching legs to blower/ motor assembly (4) 17.
FOR YOUR OWN SAFETY , DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETEL Y ASSEMBLED AND YOU READ AND UNDERST AND THE ENTIRE INSTRUCTION MANUAL. CASTERS 1. T urn stand (A) upside down, as shown in Fig 1C. 2. Place 3/8” lockwasher on caster stud (B) and screw caster into thr eaded hole on the bottom of the stand.
10 AL TERNA TE SETUP The steps so far will assemble the unit with the motor on top and dust intake ports on bottom, as shown in Fig 4. This unit can be assembled with the intake port (B) Fig. 5 in the up position by following the steps in “LEGS TO MOTOR/BLOWER ASSEMBL Y .
11 A TT ACHING DUST COLLECTION BAG USING CLOTH COVERED FLEXIBLE RING: 1. T ake cloth-cover ed bag retainer ring (A) Fig. 8 and place it inside opening of clear plastic dust collection bag. Fold about 6 inches of the bag down around the r etainer ring.
12 A TT ACHING HOSE TO INT AKE POR T DISCONNECT MACHINE FROM POWER SOURCE BEFORE CONNECTING OR DISCONNECTING HOSE . Model 50-760 provides two 4” dust ports. Pr oceed as follows for each port with your hose. NOTE: Place open end (D) of intake cap rings around and onto ends of each dust intake port before attaching the hose.
13 FOR OPERA TOR SAFETY , DO NOT OPERA TE THE MACHINE WITH ANY DUST INT AKE HOLES UNCOVERED. THE ROT A TING F AN LOCA TED INSIDE THE BLOWER HOUSING IS ACCESSIBLE THROUGH THE DUST IN-T AKE PORT AND CAN BE HAZARDOUS. AL WA YS WEAR PROPER APP AREL. DO NOT WEAR JEWELR Y AND KEEP FINGERS AND ALL FOREIGN OBJECTS OUT OF THE DUST INT AKE PORT .
14 MAINTENANCE P AR TS, SERVICE OR W ARRANTY ASSIST ANCE All Delta Machines and accessories are manufactur ed to high quality standards and are serviced by a network of Porter -Cable • Delta Factory Service Centers and Delta Authorized Service Stations.
NOTES 15.
The following are trademarks of POR TER-CABLE • DEL T A (Las siguientes son marcas registradas de POR TER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de la POR TER-CABLE • DEL T A): Auto-Set ® , BAMMER ® , B.O.S.
An important point after buying a device Delta 50-760 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Delta 50-760 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Delta 50-760 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Delta 50-760 you will learn all the available features of the product, as well as information on its operation. The information that you get Delta 50-760 will certainly help you make a decision on the purchase.
If you already are a holder of Delta 50-760, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Delta 50-760.
However, one of the most important roles played by the user manual is to help in solving problems with Delta 50-760. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Delta 50-760 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
