Instruction/ maintenance manual of the product S520 Dell
Go to page of 12
Dell Interactive Pr ojector S520 Scr een/Whiteboar d PTDRV.
2 Important Safety Instructions W ARNING: Failure to r ead, thor oughly understand, and follow all instructions can result in serious personal injury , damage to equipment, or voiding of factory warranty! It is the installer’ s responsibility to make sur e all components ar e properly assembled and installed using the instructions provided.
3 14.02 in. (356.2 mm) 78.75 in. (2000.1 mm) 80.37 in. (2041.4 mm) 4.99 in. (126.7 mm) 5.02 in. (127.4 mm) 38.77 in. (984.8 mm) 15.23 in. (386.8 mm) 6.6 in. (167.52 mm) 1.21 in. (30.65 mm) 41.60 in. (1056.5 mm) 55.52 in. (1410.1 mm) 1.67 in. (42.3 mm) 2.
4 1/8 in. (wood) 1/2 in. (drywall) 8 mm (concrete) 6 mm (concrete – AF6 toggler) 7/16” Wr ench #8 X 1/2” Screw (7) 1/4” W asher (3) #8 x 3/4” Screw (1) #8-10 W all Anchor (10) Screen Bracket.
5 1. Determine desired height of image (measur ed from oor) (Figure 1). 2. Determine desired center of image ar ea (Figure 1). 3. Measure 4-1/16” up fr om desired height (top) of image and 4” to the right of center of screen and mark location (Figure 1).
6 NOTE: The (3) 1/4” x 1-1/2” bolts and (3) washers requir ed in Steps 6-8 are NOT INCLUDED with the scr een/whiteboard packaging. 6. Install (1) 1/4” x 1-1/2” bolt and (1) washer through middle of bracket into previously drilled hole, leaving 1/2” of the bolt extending from wall.
7 IR Sensor Power Projector Signal Cable Projector Power Cor d Figure 4 Figure 5 Installation (continued) 10. Install the (3) screen brackets using: W ood or steel studs: (3) supplied #8 x 1” scr ews. Concrete wall or no studs: (3) supplied #8-10 wall anchors and (3) supplied #8 x 1” screws.
8 13. Mount screen onto wall bracket by hooking into the back gr oove of the screen frame (Figur e 6). NOTE: The bumpers on the back side of the screen/whiteboar d are used to maintain planarity when pressur e is applied to the projection surface during usage.
9 Installation (continued) Figure 9 Figure 11 Figure 10 Attach marker tray to frame with (2) screws into the side channel. Safety Screw 17. Secure marker tray to right side of scr een frame at desired height by using (2) of the supplied #8 x 1/2” screws into the side channel of the screen frame (Figur e 9).
10 20. Attach sensor cover by snapping clips over screen frame. Secure to frame by scr ewing down into the upper channel of the screen frame with supplied #8 x 3/4” scr ew (Figure 12). 21. In between the projector mount and the IR sensor cover , cable clips will be mounted to the wall for cable management.
11 Recommended Scr een/Whiteboard Markers This Dell S520 Screen/Whiteboar d is a dual-purpose projection screen and whiteboar d. The surface of the screen/whiteboar d can be used with dry erase markers from a wide variety of manufacturers and brands. Do not use permanent markers with this product.
CW88R Rev . A00 24695 Rev00 • Go to http://do wnloads.chiefmfg. com/MANUALS- I/PTDRV-I.pdf for trans lated instructions. • Entre en http://downloa ds.chiefmfg. com/ MANUALS-I/PTDRV-I.pdf para ob tener las instrucciones traducid as en su idioma. • Bedienungsan leitungen in Ihrer Sprach e finden Sie auf http: //downloads.
An important point after buying a device Dell S520 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell S520 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell S520 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell S520 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell S520 will certainly help you make a decision on the purchase.
If you already are a holder of Dell S520, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell S520.
However, one of the most important roles played by the user manual is to help in solving problems with Dell S520. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell S520 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
