Instruction/ maintenance manual of the product E1910H Dell
Go to page of 29
Dell™ E1910H Flat Panel Monitor User's Guide Notes, Notices, and Cautions Information in this document is subject to change without notice. © 2009DellInc.Allrightsreserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page About Your Monitor Dell™E1910HFlatPanelMonitorUser'sGuide Package Contents Product Features Identifying Parts and Control.
Product Features The Dell™E1910H flat panel display has an active matrix, Thin - film Transistor, Liquid Crystal Display. The monitors features include: ■ Dell E1910H has a 18.5 - inch (470.0 mm) viewable area display. ■ 1366 x 768 resolution, plus full - screen support for lower resolutions.
Side View Bottom View Label Description Use 1 Barcode serial number label Refer to this label if you need to contact Dell for technical support. 2 Regulatory rating label List the regulatory approvals. 3 VESA mounting holes (100mm) T o mount the monitor.
Monitor Specifications The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Plug and Play Capability You can install the monitor in any Plug and Play - compatible system. The monitor automatically provides the computer with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so that the system can configure itself and optimize the monitor settings.
Preset Display Modes The following table lists the preset modes for which Dell guarantees image size and centering: Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical) VESA, 720 x 400 31.
LCD Monitor Quality & Pixel Policy During the LCD Monitor manufacturing process, it is not uncommon for one or more pixels to become fixed in an unchanging state. The visible result is a fixed pixel that appears as an extremely tiny dark or bright discolored spot.
Back to Contents Page Appendix Dell™ E1910H Flat Panel Monitor User's Guide Safety Instructions FCC Notice (U.S. Only) and Other Regulatory Information Contacting Dell CAUTION: Safety Instructions For information on safety instructions, see the Product Information Guide .
Back to Contents Page Setting Up Your Monitor Dell™E1910HFlatPanelMonitor IfyouhaveaDell™desktoporaDell™portablecomputerwithinternetaccess 1. Go to http://support.dell.com , enteryourservicetag,anddownloadthelatestdriverforyourgraphicscard.
Back to Contents Page Setting Up Your Monitor Dell™ E1910H Flat Panel Monitor IfyouhaveanonDell™desktop,portablecomputer,orgraphicscard 1. Right - click on the desktop and click Properties . 2. Select the Settings tab.
Back to Contents Page Operating the Monitor Dell™ E1910H Flat Panel Monitor User's Guide Using the Front Panel Controls Using the On - Screen Display (OSD) Menu Sett.
Front panel Key Use the keys onthefrontofthemonitortoadjusttheimagesettings. Using the On - Screen Display (OSD) Menu Accessing the Menu System Exit Use the Exit key to exit on - screen display(OSD) from menu and sub - menus.
The table below provides a list of all the OSD menu options and their functions. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the button again.
Auto Adjustment allows the monitor to self - adjust to the incoming video signal. After using Auto Adjustment, you can further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under Image Settings.
l Standard : Loads the monitor's default color settings. This is the default preset mode. l Multimedia : Loads color settings ideal for multimedia applications. l Game : Loads color settings ideal for most gaming applications. l Warm : Increase the color temperature.
Back Press to go back to the main menu . Horizontal Position Use the or buttons to adjust image left and right. Minimum is '0' ( - ). Maximum is '100' (+) . Vertical Position Use the or buttons to adjust image up and down.
Menu Transparency Allows you to adjust the OSD background from opaque to transparent. Menu Timer Allows you to set the time for which the OSD remains active after you press a key on the monitor. Use the and keys to adjust the slider in 1 second increments, from 5 to 60 seconds.
OSD Warning Messages Back Press to go back to the main menu. When the monitor does not support a particular resolution mode you will see the following message: This means that the monitor cannot synchronize with the signal that it is receiving from the computer.
See Solving Problems for more information. Setting the Maximum Resolution To set the Maximum resolution for the monitor: 1. Right - click on the desktop and select Properties . 2. Select the Settings tab. 3. Set the screen resolution to 1366 x 768.
Back to Contents Page NOTE: The stand is detached when the monitor is shipped from the factory..
Back to Contents Page Setting Up Your Monitor Dell™ E1910H Flat Panel Monitor Setting the display resolution to 1366X768 ( Maximum) For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1366 x 768 pixels by performing the following steps: 1.
Dell™ E1910H FlatPanelMonitor Information in this document is subject to change without notice. © 2009 DellInc.Allrightsreserved Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
Back to Contents Page Setting Up the Monitor Dell™ E1910H Flat Panel Monitor User's Guide Attaching the Stand Connecting Your Monitor Removing the Stand Base .
Removing the Stand Base Attaching the Dell Soundbar(Optional) CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary. To remove the base of the stand from the monitor: 1. Placethemonitorpanelonsoftclothorcushiononastableflattable.
To attach the soundbar: Removing the Stand for VESA Wall Mount Back to Contents Page NOTICE: DonotusewithanydeviceotherthantheDellSoundbar. 1. Working from the back of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.
Back to Contents Page Troubleshooting Dell™ E1910H Flat Panel Monitor Self - Test Common Problems Product Specific Problems Self - Test Your monitor provides a self - test feature that allows you to check whether your monitor is functioning properly.
To run the built - in diagnostics: 1. Ensure that the screen is clean (no dust particles on the surface of the screen). 2. Unplug the video cable from the back of the computer or monitor. The monitor then goes into the self - test mode. 3. Press and hold the 1st and 4th buttons on the front panel, simultaneously for 2 seconds.
Product Specific Problems Back to Contents Page Wrong Color Picture color not good l Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending on the application. l Try different Color Preset Settings in Color Settings OSD.
An important point after buying a device Dell E1910H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell E1910H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell E1910H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell E1910H you will learn all the available features of the product, as well as information on its operation. The information that you get Dell E1910H will certainly help you make a decision on the purchase.
If you already are a holder of Dell E1910H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell E1910H.
However, one of the most important roles played by the user manual is to help in solving problems with Dell E1910H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell E1910H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
