Instruction/ maintenance manual of the product AMD FirePro S9000 6GB GDDR5 Dell
Go to page of 28
AMD FirePro™ S9000 User Guide Part Number: 52382_enu_1.0.
© 2012 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. (“AMD”) products.
Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. iii © 2012 Advanced Micro Devices Inc.
Important Safety Instructions Note: This product is for use only with compatible UL-listed personal computers that have installation instructions detailing user installation of this class of product. Read all instructions before beginning installation.
Contents Chapter 1 Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4.2 Industry Canada Compliance Statement (Canada) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 5.4.3 CE Compliance Information (European Union) . . . . .
Chapter 1 Getting Started Before you begin installing your new AMD FirePro™ S9000 graphics card (P/N: 102- C480xx-xx), please make sure you have the proper system requirements and have completed the required preinstallation tasks as outlined in this chapter.
3. Record the serial number and 102 part number. Figure 1–1 Typical Serial Number and 102 Part Number Arrangement 1 Serial number (S/N) 2 102 part number (P/N) 2 Getting Started AMD FirePro™ S9000 © 2012 Advanced Micro Devices Inc.
Chapter 2 Hardware and Software Installation This chapter details how to install your graphics accelerator in your system as well as where to download associated software and drivers.
2. Unplug the computer's power cord, and then disconnect all cables from the back of the computer. Caution: Wait approximately 20 seconds after unplugging the power cord before disconnecting a peripheral cable or removing a component from the motherboard to avoid possible damage to the motherboard.
b. Screw in the extension bracket firmly. Note: Graphics card and extension bracket may not be exactly as depicted. Figure 2–2 Extension Bracket Attached to Graphics Card 7. Align your AMD FirePro graphics card with the PCIe slot and press it in firmly until the card is fully seated.
2.3 Installing Graphics Drivers and Software To install or remove the drivers and software, you must be logged on as a user with administrator rights. Drivers and configuration software, which include the Control Center software application, are provided to both operate and take advantage of all the features of the graphics accelerator.
Chapter 3 Display Configuration This chapter describes how to configure displays. It also lists available display connections for your graphics accelerator. 3.1 Baseplate Connections The following figure shows the display connections available on your graphics accelerator.
Display Configuration Card Connection Used DisplayPort display DisplayPort connection DFP (DVI) display DisplayPort connection with DisplayPort-to-DVI adapter (single- or dual-link) HDMI™ display Di.
Chapter 4 Using the Control Center Software 4.1 Control Center Overview The Control Center software application contains settings for configuring and fine- tuning your AMD product.
Table 4–1 Control Center Access Routes in Windows® Access Route Instructions Windows Desktop 1. Right-click anywhere on the desktop. 2. From the shortcut menu that appears, click the Control Center option. Windows Start Menu 1. Click Start on the Windows task bar.
Chapter 5 Reference This chapter provides notices, troubleshooting tips, and customer care, warranty, and standards-compliance information. 5.1 Workstation Card Troubleshooting The following troubleshooting tips may help if you experience problems.
Make sure that you selected the appropriate monitor when you installed your enhanced driver. Make sure that the display resolution and refresh rate settings you have selected are supported by the monitor you have connected. 5.1.3 There are screen defects.
5.1.6 There are bus address or interrupt conflicts. Make sure that the I/O and memory addresses reserved for the graphics board are not used by other hardware devices.
Region Contact Information Germany: • 49 (0) 89 4505 3199 • +49-(0)30-30808249 • Monday - Friday: 09:00 - 18:00 CET • Email Web Form United Kingdom: • +44 (0) 1276 932318 • +31-208080959 .
Region Contact Information India: • +91-80-33230647-9 • Monday - Friday: 09:00 - 17:00 IST • Online Warranty Request Singapore (English): • 8001204639 • Monday - Friday: 09:30 - 17:00 SST .
5.3 Workstation Warranty Service For warranty service instructions visit http://support.amd.com/us/warranty/Pages/ SupportWarrantyServices.aspx or contact one of our Customer Service Representatives. 5.3.1 Shipping Before shipping any unit for repair, obtain an RMA number for warranty service.
Unauthorized repairs to an AMD board level product will void the warranty offered by AMD. AMD reserves the right to refuse to service any product which has been altered, modified, or repaired by non-AMD service personnel.
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Re-orient or relocate the receiving antenna.
Class B EMC Directive 2004/108/EC CISPR 22/EN 55022—Class B: Limits and methods of measurement of radio disturbance characteristics of Information Technology Equipment. CISPR 24/EN 55024—Information Technology Equipment—Immunity Characteristics —Limits and Methods of Measurements 5.
This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions. VCCI V-3 Class B Translation: This is a Class B product based on the standard of the VCCI Council.
As this equipment has undergone EMC registration for business purpose, the seller and/or buyer is asked to beware of this point and in case a wrongful sale or purchase has been made, it is asked that a change to household use be made.
CNS13438 5.4.8 C-Tick (Australia and New Zealand) ACMA — Australian Communications and Media Authority • Radiocommunications Act 1992 (Australia)—per notices of section 182 • AS/ NZS CISPR 22 5.
An important point after buying a device Dell AMD FirePro S9000 6GB GDDR5 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell AMD FirePro S9000 6GB GDDR5 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell AMD FirePro S9000 6GB GDDR5 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell AMD FirePro S9000 6GB GDDR5 you will learn all the available features of the product, as well as information on its operation. The information that you get Dell AMD FirePro S9000 6GB GDDR5 will certainly help you make a decision on the purchase.
If you already are a holder of Dell AMD FirePro S9000 6GB GDDR5, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell AMD FirePro S9000 6GB GDDR5.
However, one of the most important roles played by the user manual is to help in solving problems with Dell AMD FirePro S9000 6GB GDDR5. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell AMD FirePro S9000 6GB GDDR5 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center