Instruction/ maintenance manual of the product 820HD Dell
Go to page of 12
.
F M Antenna Input an “F” connector jack AM Ant enna Input a 3.5 mm minijack Ant enna Input Identication.
Antennas P rovided with the SoundW orks Radio 820HD Connect one FM antenna and the AM antenna. FM dipole ant enna, with push-on connec tor -best over all reception- see page 2 -1- FM wire an tenna wit.
Connect the FM an tenna Dipole Antenna 1) The dipole antenna pr ovides the best reception of the three antennas when pr operly positioned. The dipole an - tenna consists of an acti ve secti on and a lead-i n sectio n (see illustration on previous page).
-3- T elescoping W hip Ant enna The telescoping whip ant enna provides good r eception and can be easily adjusted. With adjustment factored in, it may perform the best of the three antennas. Once properly installed, the telescoping whip ant enna will remain at an y position you place it.
-4- W ire An tenna 1) If all the desired FM stations ha ve strong sig nal strength, the wire antenna can be used . It is the easiest of the three antennas to install and conc eal. 2) Connect the wire antenna to the SoundW orks R adio 820HD by pushing the connector plug onto the F M an - tenna input.
-5- 2) 1) 3) 4) AM Antenna 1) Identify the AM Antenna. 2) F old the base as shown. 3) Snap the tab on the loop into the slot in the base to complete the AM Antenna assembly . Be careful not to pinch the connecting wire. 4) The nished antenna will stand upright, as sho wn.
-6- Other Antenna Options The FM an tennas and the AM antenna pr ovided with the SoundW orks Radio 820HD will work well in most locations that get adequate F M and AM reception on c onven tional radio receiv ers. But there ma y an FM or AM sta tion of interest wher e reception is marg inal.
A typical “rabbit ear” st yle antenna, with “F” connector and User-Supplied Screw On to Push On adapter . “Rabbit Ears” fully extended. This conguration will provide the best reception when rotated or repositioned for peak signal strength on a specic station.
-8- Additional An tenna Options I f you live mor e than 20 miles from an F M transmitter of interest and y ou live in a wood fr ame building, consider placing or mounting an F M antenna in the top of the build - ing (attic or crawl space). Run additional c oax lead-in wire to the radio .
.
Rev 1_8 English.
An important point after buying a device Dell 820HD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dell 820HD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dell 820HD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dell 820HD you will learn all the available features of the product, as well as information on its operation. The information that you get Dell 820HD will certainly help you make a decision on the purchase.
If you already are a holder of Dell 820HD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dell 820HD.
However, one of the most important roles played by the user manual is to help in solving problems with Dell 820HD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dell 820HD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
