Instruction/ maintenance manual of the product 78-0013-4441-1-D 3M
Go to page of 12
3M ™ One Pass Mini FiberPathw ay Installation Instructions December 2012 78-0013-4441-1-D 3 The Network of Networks..
2 78-0013-4441-1-D 3M ™ One Pass Mini F iber Pathway Contents 1.0 System Overvie w ............................................................................................................................ 3 2.0 Components and Accessories ........
78-0013-4441-1-D 3 3M ™ One Pass Mini F iber Pathway 1.0 System Over view The One Pass Mini Fiber P athway is designed for use in FTTP (Fiber-to-the-Premise) netw orks within brownfield or greenfield Multi Dwelling Units (MDUs).
4 78-0013-4441-1-D 3M ™ One Pass Mini F iber Pathway 3.2 ILU installation tools are wear items, and should be replaced on a bi-annual basis, or approximately ev ery 500 installed units.
78-0013-4441-1-D 5 3M ™ One Pass Mini F iber Pathway 4.3 Hang weight from strip. Release tab T ab hole 4.4 Remov e successful test strips by pulling on release tab T est W eight Hang Time Result > 60 seconds P ASS – Install < 60 second F AIL – Do not install The path the duct will follow MUST be clean and dry .
6 78-0013-4441-1-D 3M ™ One Pass Mini F iber Pathway • Do not remov e duct from box. Route end through handle as shown and pay of f duct. 6.0 Exposing Fiber For T ermination Expose 2-4' (610-1220 mm) of fiber fr om the end of the duct before terminating using the following method: 6.
78-0013-4441-1-D 7 3M ™ One Pass Mini F iber Pathway 7.3 After exposing appropriate length of f iber for termination, attach duct by aligning the end of the duct with the recessed area in the base.
8 78-0013-4441-1-D 3M ™ One Pass Mini F iber Pathway 10.0 Planar Cor ner Installation 10.1 Peel adhesi ve liners and attach support in duct path. Marking grooves Mark flange at groove Leave 12" (300 mm) of liner intact 10.2 T rim the duct flange using the 3M ™ One Pass Mini Duct Flange Remov al T ool.
78-0013-4441-1-D 9 3M ™ One Pass Mini F iber Pathway 11.0 Mechanical Anchor Installation 11.1 Remov e liner, align groo ve with duct and press firmly into place.
10 78-0013-4441-1-D 3M ™ One Pass Mini F iber Pathway 14.0 Connector T ermination and Final Steps 14.1 T erminate the f iber using a 3M ™ No Polish Connector or 3M ™ Crimplok+ Connector . Anchor furcation tubing Feed through from living unit 3M ™ One Pass Point-of-Entry Box (Hallway Side) 14.
78-0013-4441-1-D 11 3M ™ One Pass Mini F iber Pathway 15.0 Fiber Repair 15.1 Ensure that the root cause for service interruption is damaged 900 µm. 15.2 W orking away from the W all Outlet, mak e small window cuts using the W indow Cut T ool at e very other corner or turn.
3M and ScotchBlue are trademarks of 3M Company . Important Notice All statements, technical information, and recommendations related to 3M’ s products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed.
An important point after buying a device 3M 78-0013-4441-1-D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought 3M 78-0013-4441-1-D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data 3M 78-0013-4441-1-D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, 3M 78-0013-4441-1-D you will learn all the available features of the product, as well as information on its operation. The information that you get 3M 78-0013-4441-1-D will certainly help you make a decision on the purchase.
If you already are a holder of 3M 78-0013-4441-1-D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime 3M 78-0013-4441-1-D.
However, one of the most important roles played by the user manual is to help in solving problems with 3M 78-0013-4441-1-D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device 3M 78-0013-4441-1-D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
