Instruction/ maintenance manual of the product MCL-3K-T Dakota Digital
Go to page of 4
MAN#650302-A MCL-3K-T and MCL-3K-T-R Outside Air Temp MCL-3000/3006 Instrume nt Packages This gauge can replace any ONE of the original f our small gauges in the Dakota Digital MCL-3 000 and MCL-3006 products.
MAN#650302-A Next attach the power, ground, and sender wires at the gauge using the insulated female spade ends of the wires. Please note that the sensor has a red and black wire running into a black c able, this red sensor wire is the sensor signal, do not confuse this with th e power wire.
MAN#650302-A GAUGE SETUP The function switch or trip switch, discussed in the MCL-3000/3006 manual, is used to enter s etup mode for all of the gauges. The first step in the setup proced ure is to select which gauge you are going to select t o change a setting.
MAN#650302-A Troubleshooting guide Problem Possible cause S olution Gauge will not light up. Orange wire does not have power. Connect to a location that has powe r, check fuses. Black wire is not getting a good ground. Connect ground to a di fferent location.
An important point after buying a device Dakota Digital MCL-3K-T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Dakota Digital MCL-3K-T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Dakota Digital MCL-3K-T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Dakota Digital MCL-3K-T you will learn all the available features of the product, as well as information on its operation. The information that you get Dakota Digital MCL-3K-T will certainly help you make a decision on the purchase.
If you already are a holder of Dakota Digital MCL-3K-T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Dakota Digital MCL-3K-T.
However, one of the most important roles played by the user manual is to help in solving problems with Dakota Digital MCL-3K-T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Dakota Digital MCL-3K-T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
