Instruction/ maintenance manual of the product DSL-G624T D-Link
Go to page of 111
DSL-G624T Wi reless ADSL2+ Router User Guide January 2006 ESLG624TEUA1G.
FCC Warning This device complies with part 15 of the FCC Rules. Op eration is subject to th e following two conditions: (1) This device may not cause harmful interfe rence, and (2) this device m ust accept any interference receive d, including interference that may cause undesired operatio n.
.
Table Of Contents BEFORE YOU START ...................................................................................................... IV Installation Overview ........................................................................................
Virtual Server ....................................................................................................................................................9 LAN Clients ..........................................................................
DSL-G624T Wireless ADSL Router User Guide About This User Guide This user’s guide prov ides instructions on how to install the DSL-G 624T Wireless ADSL Router and use it to connect a computer or Ether net LAN to the Internet. Note You must have an ADSL account setup in or der to use this device for In ternet access.
DSL-G624T Wireless ADSL Router User Guide Packing List Open the ship ping carto n and carefull y remove all items. Ma ke sure that y ou have the it ems list ed here.
DSL-G624T Wireless ADSL Router User Guide Security for wireless communication can be accomplishe d in a number of ways. Th e DSL-G624T supports WE P encryption, 802.1X au thentication, and WPA (Wi-Fi Protected Access) . Wireless access can also be controlled by selecting MAC addresses that are allowed to associate with the device.
DSL-G624T Wireless ADSL Router User Guide instructed to specify the modulation type used for th e Router, you may choose among the numerous options available on the Modulation Type drop-d own menu on .
DSL-G624T Wireless ADSL Router User Guide Information you will need about your DSL-G624T Wireless ADSL Router: Username This is the Username needed acce ss the Router’s management interface. When you attempt to conn ect to the device through a web browser you will be prompted to enter this Username.
DSL-G624T Wireless ADSL Router User Guide 1 Introduction This section pr ovides a bri ef descripti on of the Rout er, its associ ated technolo gies, and a l ist of Rout er features. Router Description and Operation The DSL-G624T Wirel ess ADSL Router i s designed to pro v ide connectivity for your pr ivate Ethernet LAN, and 802.
DSL-G624T Wireless ADSL Router User Guide Router Features The DSL-G624T ADSL Router utilizes the latest ADSL enhancem ents to provide a reliable Internet portal suitable for most sm all to medi um sized of fices .
DSL-G624T Wireless ADSL Router User Guide Standards Compatibility and Compliance The DSL-G624T complies with or is co mpatible with the follo wing standards as recognized by their respective agencies. • ITU G.992.1 (G.DMT) complian t • ITU G.992.2 (G.
DSL-G624T Wireless ADSL Router User Guide Front Panel Display Place the Router in a location that perm its an easy view of the LE D indicato rs on the front panel. The LED indi cators on the front panel include Power , Status , ADSL , WLAN , and LAN .
DSL-G624T Wireless ADSL Router User Guide Rear Panel Connections All cable connections to th e Router are made at the rear pa nel. Connect the power ada pter here to power on the Router. Use the Reset button to restore the settings to the factory defa ult values in th e next chapter for instru ctions on using the reset button).
DSL-G624T Wireless ADSL Router User Guide Setting Up a Wireless Network In order t o get the best perform ance from the wireless com ponent of the R outer, you s hould have some basi c understan ding of how wirel ess networ ks operate.
DSL-G624T Wireless ADSL Router User Guide Location and Wireless Operation Many physical environment al factors can im pact wireless net works. Ra dio waves are used to ca rry the encode d data between devices. These radio transmissions can become degr ad ed due to signal attenuatio n, multi-path distor tion and interference or noise.
DSL-G624T Wireless ADSL Router User Guide 2 Hardware Installation The DSL-G624T Wireless ADSL Router maintains three sepa rate interfaces, an Et hernet LAN, a wireless LAN and an ADSL Internet (WAN) conn ection. Carefully consid er the Router’s location su itable for connectivity for your Ethernet and wireless devices.
DSL-G624T Wireless ADSL Router User Guide Network Connections Wired network connections ar e provided th rough the ADS L port and the four Ethernet ports on t he back of the Ro uter.
DSL-G624T Wireless ADSL Router User Guide Computer to Router Connection You can con nect the Rout e r directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using th e Etherne t cable provi ded as sho wn in this diagram.
DSL-G624T Wireless ADSL Router User Guide The illustration below shows the DSL-G624T connected to Eth ernet LAN devices, Wireless LAN devices, and the Internet.
DSL-G624T Wireless ADSL Router User Guide 3 Basic Router Configuration The first time you set up the Router it is recommended that you configure th e WAN connection using a single computer making sure that bot h the com puter and t he Router a re not connect ed to t he LAN.
DSL-G624T Wireless ADSL Router User Guide Access the Configuration Manager In order to m ake sure your com puter’s IP s ettings allow it to communicate with the Router, it is adv isable to configure your system be a DHCP client – that is, it will get IP se tting s from the Router.
DSL-G624T Wireless ADSL Router User Guide Configure the Router When you suc cessfully connect to t he web manager, the Home directory tab will display the Setup Wizard window. You can lau nch the Set up Wizard fr om this pa ge or use t he buttons located i n the left panel of t he web page to vi ew other windo ws used for basic confi guration.
DSL-G624T Wireless ADSL Router User Guide Wizard To use the Setup Wizard, click t he Run Wizard button in the first browser window and follow the instructions in the pop-up window that app ears. The initial window summari zes the setup process. Click the Next button to proceed.
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - Choose Time Zone Choose the tim e zone you are in from the pull-d own menu and cl ick Next . This sets the system time used for the Router. If you wish to return to the previous window du ring the setup process, click the Ba ck button.
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - Choose Connection Type Now select the Connection Type used for the Internet connection . Your ISP has given this information to you. The connection types availab le for “Multi-User” Mode are PPPoE/PPPoA , Dynamic IP Address , Static IP Address , and Bridge Mode .
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - For PPPoE/PPPoA connections: 1. Type in the Username and Password used to identify and verify your acco unt to the ISP. 2. Select the specific Connection Type from t he drop-dow n menu.
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - For Dynamic IP Address connections: 1. Select the specific Connection Type from the drop-down m enu. The avail able Dynam ic IP Address connection and encapsulation types are 1483 Bridge d IP LLC and 14 83 Bridged IP VC-M ux .
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - For Static IP Address connections: 1. Select the specific Connection Type from the drop-dow n menu. The avai lable Static IP Address c onnection and encapsul ation types are 1483 Bridge d IP LLC , 1483 Bridged I P VC-Mux , 1483 Ro uted IP LLC , 1483 Routed IP VC-Mux and IPoA .
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - For Bridge Mode connections: 1. Select the specific Connection Type from the drop-down menu. The available B ridge Mode connection and encapsulation types are 1483 Bridged IP LLC and 1483 Bridge d IP VC-Mux .
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - For Wireless LAN connections: 1. Click the Enable AP box to allow the router to oper ate in the wireless environm ent. 2. The SSID identifies mem bers of the Service Set. Accept the default name o r change it to something else.
DSL-G624T Wireless ADSL Router User Guide Using the Setup Wizard - Finish and Restart Finally you can confirm that the setup pr ocess is com pleted. If you are satisfied that you have entere d all the necessary information correctly, click the Restart button to save the new configuration settings and restart the Rou ter.
DSL-G624T Wireless ADSL Router User Guide Wireless To configure the Router’ s basic configuration settings withou t running the Setup Wizard, you can access the windows used to config ure Wireless, WA N, LAN, DHC P, DNS, and Dynamic DNS sett ings directly from the Home directory .
DSL-G624T Wireless ADSL Router User Guide WEP WEP (Wireless Encryption Protocol) encryption can be enabled for security and privacy. WEP e ncrypts the data portion of eac h fram e transmitt ed from the wi reless adapt er using o ne of the p redefined key s.
DSL-G624T Wireless ADSL Router User Guide 3. From the drop -down m enu, select an A uthenticat ion Type: Ope n , Shared , or Both . 4. Select a key by cl icking a radi o button on the left , select an encry ption lev el from the drop-dow n menu on the right, and then enter the proper-length k ey.
DSL-G624T Wireless ADSL Router User Guide Wireless Settings window – 802.1x 1. Make sur e the Enable AP checkbox at th e top of the window has been ticked. 2. Under Securi ty, click t he WPA radio button. 3. Click the 802.1 x radio button. 4. Under Serve r IP Addres s, enter the IP address of t he RADIUS server.
DSL-G624T Wireless ADSL Router User Guide WPA (Wi-Fi Protected Access) Wi-Fi Protecte d Access was desi gned to provi de improved data encry ption, perceive d as weak in WEP, and to pr ovide user authentica tion, largely nonexiste nt in WEP.
DSL-G624T Wireless ADSL Router User Guide • 802.1x Secret: The password. This should be obtained from your ISP. • PSK Hex He x: This Pre-Shared Key i s a hexadecim al value of 1-32 chara cters in lengt h. • PSK String Strin g: This Pre-Shared Key is an alphanum eric value of 1-63 characters in length When yo u are fin ished , click Apply .
DSL-G624T Wireless ADSL Router User Guide WAN Settings w indo w – PPPoE/PPPoA To set up a PPPoE or PPPoA connection: 1. If not already selected, choose the PPPoE/PPPoA opt ion from the WAN Settings pull-dow n menu. PPPoE/PPPoA is selected by default if you ar e configuring the Router for the first time.
DSL-G624T Wireless ADSL Router User Guide 2. Under the ATM VC Settings at the top of the window shoul d not be changed unl ess you have been instructed to change them. However, if you are instructed to chan ge the VPI or VCI values, type in the va lues assigned for your account.
DSL-G624T Wireless ADSL Router User Guide 16. The Router will save the new settings and restart. Upon restarting the Router will automatically establish the WAN connection.
DSL-G624T Wireless ADSL Router User Guide default setting for Dynamic IP . Some users will be given a specific IP address for the WAN interface. In th is case you need to change this setting to Static IP . When Static IP is selected in the IP Control menu, you need to type in the global IP a ddress provided to you by your ISP.
DSL-G624T Wireless ADSL Router User Guide WAN Settings window – Bridge Mode Select the connection type used for your accoun t. The wi ndow will display settings that are appropriate for the connection type you select. Follow the instruction below according to the type of connection you select in the WAN Settings window.
DSL-G624T Wireless ADSL Router User Guide 2. Under the ATM VC Settings at the top of the window should not be changed unless you have been instr ucted to change the m. However, if you are i nstructed to change the VPI or VCI val ues, type in the values assigned for your account.
DSL-G624T Wireless ADSL Router User Guide Dynamic IP Address A Dynami c IP Address connect ion configu res the Router to automatically obtain its glo bal IP address from a DHCP server on t he ISP’s net work. The service provider assi gns a global IP address from a pool of addresses avai lable to t he service provider.
DSL-G624T Wireless ADSL Router User Guide WAN Settings window – Dynamic IP Address To configure a Dynam ic IP Address conn ection for the WAN, follow these steps: 1.
DSL-G624T Wireless ADSL Router User Guide can be used later if you are con figuring multiple vir tual circuits for your ADSL serv ice. For more information on ATM VC Settings, see the table on page 44 below. 3. Under the Dynamic IP heading, choose the Connection Type from the pull-down menu.
DSL-G624T Wireless ADSL Router User Guide zeros - 0:0:0:0:0:0 - and click the Clone MAC Address button. Cloned MAC Address To clone the MAC address of your comp uter’s Ethernet adapter, type in the MAC address in the Cloned MAC Address field and then click this Clone MAC Address button.
DSL-G624T Wireless ADSL Router User Guide Static IP Address When the Ro uter is confi gured to use Static IP Addre ss assignment for the W AN connect ion, you m ust manually assign a global IP Address, Subnet Mask an d Gateway IP Address us ed for the WAN connection.
DSL-G624T Wireless ADSL Router User Guide To configure a Static IP type connec tion for the WAN, follow these steps: 1. Choose the Static IP Address option from the WAN Settings pull-down men u. 2. Under the ATM VC Settings at the to p of the wi ndow should not be cha nged unless y ou have been instructed to change them.
DSL-G624T Wireless ADSL Router User Guide Static IP Parameters Description Connection Type This specifies the connection type and the encapsulation method used for your Static IP Address connection . The options available are Bridged IP LLC , Bridged IP VC-Mux , Routed IP LLC , Routed IP VC-Mux or IPoA .
DSL-G624T Wireless ADSL Router User Guide ATM Settings for WAN connection Additional ATM settin gs for PPPoE or PPPo A connections: ATM Parameters Description Service Category The ATM settings allow the user to ad just ATM Qu ality of Service (QoS) or traffic parameters to suit specific tra ffic requirements.
DSL-G624T Wireless ADSL Router User Guide Cell Delay Variation Tolerance – CDVT is a measur e of the cell clumping phenomenon by which cells are delayed in the network and are clumped together and arrive at a sy stem at a faster rate than n egotiated.
DSL-G624T Wireless ADSL Router User Guide remaining PVCs are disabled. 45.
DSL-G624T Wireless ADSL Router User Guide LAN You can configure the LAN IP address to suit you r preference. Many users will find it convenien t to use the default settings together with DHCP service to manage the IP settings for their private network.
DSL-G624T Wireless ADSL Router User Guide DHCP The DHCP server is enabled by defa u lt for the Router’s Ethernet LAN interface. DHCP service will supply IP settings to workstations configured to au tomatically obtain IP setting s that are connected to the Rout er though the Ethernet por t.
DSL-G624T Wireless ADSL Router User Guide To display the DHCP Settings window, click the DHCP button in the Home directory. Any active DHCP Clients appear at the bottom of the window in the DHCP Client s List. The IP address and MAC address for active DHCP clients are displayed in the list.
DSL-G624T Wireless ADSL Router User Guide To manually configure IP settings on Windows workstations, open the TCP/IP Properties menu and select the “Use the following IP address” option. You will need to supply the IP addres, Subnet mask and Defualt gateway (use IP address of DSL- G624T) for each workstation.
.
DSL-G624T Wireless ADSL Router User Guide Static IP on LAN If the Router has the DHCP server enabled it is po ssible to permanently assign IP addresses to workstations specified by their MAC address. Up to five IP addresses may be assigned to five different devices.
DSL-G624T Wireless ADSL Router User Guide DNS The Router ca n be configure d to relay DNS settings fr om your ISP or anothe r available ser vice to workstat ions on yo ur LAN. When using DNS relay, the Rout er will accept DNS requests from hosts on the LAN and forw ard them to the ISP’s, or alternative DNS servers.
DSL-G624T Wireless ADSL Router User Guide Dynamic DNS The Router supports DDNS (Dynamic Domain Name Servi ce). The Dyna mic DNS service allows a dynamic public IP address to be associated with a static host name in any of the many domai ns, allowing access to a s pecified host from various locations on t he Internet.
DSL-G624T Wireless ADSL Router User Guide Save Settings and Reboot When you have configured the DSL-G624T with the setting s you desire, make sure you save those settings. To sav e the system configuration setting s, click the Tools tab. You will be presented first with the Administrator Settings window.
DSL-G624T Wireless ADSL Router User Guide Multiple Virtual Connections The Router supports multipl e virtual connection s. Up to eight PVCs to eight separate destinations can be created and operated simultaneously utilizin g the same bandwidth. Additional PVC connections can be added for various purposes.
DSL-G624T Wireless ADSL Router User Guide The PVC pull-do wn menu offers eight virtual connect ions available fo r configuration. The default PVC used by the Router is labeled Pvc0 . Any additional connections that are configured must have a VPI/VCI combination that is uniqu e to the Router.
DSL-G624T Wireless ADSL Router User Guide 4 Advanced Router Management Directory Configuration and Read-only Windows Click the Home tab to access the Setup Wizard, Wireless Settings, WAN Settings, LAN Manag ement IP Configur ation, DHCP Settings for LAN Setup, DNS Configuration, and Dynamic DN S Configuration windows.
DSL-G624T Wireless ADSL Router User Guide Click the Tools tab to access the Administrat or Settings (used to set the system user name and password, back up and load settings ), Time, Remote Log Settings, System Settings, Fi rmware Upgrade, Miscellaneous Configuration, and Diagnostic Test windows.
DSL-G624T Wireless ADSL Router User Guide To enab le UPnP for an y availa bl e connection, click to check the Enable UPnP selection box, select the conn ection or connections on which you will enable UPnP listed und er Available Connections and click the Apply button.
DSL-G624T Wireless ADSL Router User Guide There a re many d ifferen t pre-conf igured rule s availa ble for specific functions such as Inte rnet gaming, VP N, streaming and interactive multi-media, stand ard TCP/IP protocols, rese rved ports, p2p, network management applications , and so on.
DSL-G624T Wireless ADSL Router User Guide Rule Management window 2. Type a Rule Name in the space pr ovided . 3. Select the port Protocol f rom the pull- down menu - you ma y select TCP , UD P o r both ( TCP/UDP ). 4. Configure a range of ports for forwardin g.
DSL-G624T Wireless ADSL Router User Guide LAN Clients The LAN Clients window is used when establishi ng port fo rwarding rules in th e Virtual Server and Filters window s. This window can be accesse d directly by clicking on the LAN Clients button in the Advanced tab.
DSL-G624T Wireless ADSL Router User Guide SNMP Simple Netw ork Managem ent Protocol is a s tandard for internet work and int ranetwork m anagement. SNMP Management windo w Configure these parameters f.
DSL-G624T Wireless ADSL Router User Guide Community Use this edit client community for server SNMP acc ess. • Name: Edit community Name. • Access Right: Access Right may choose ReadOnly or Read Write.
DSL-G624T Wireless ADSL Router User Guide To modify any previously created filter rule, click on the note pad icon in the right hand column of the Filter List for the set you want to configure. Adjust th e settings as desired and click th e Apply button to put the new settings into effect.
DSL-G624T Wireless ADSL Router User Guide Bridge Filters Bridge filters are used to block or allo w various types of p ackets through the WAN interface. This may be done for security or to improve network efficiency. Th e rules are conf igured for individual devices based on MAC address.
DSL-G624T Wireless ADSL Router User Guide Routing Use Static Routing to specify a route used for data traffic within your Ethernet LAN or to route data on the WAN. This is used to s pecify that all pac kets destined for a particular netwo rk or subne t use a predete rmined gate way.
DSL-G624T Wireless ADSL Router User Guide DMZ Since some applications are not compatible with NAT, the Rou t er supports use of a DMZ IP address for a single host on the LAN. This IP address is not protected by NAT and will therefore be vi sible to agents on the Internet with t h e right type of software.
DSL-G624T Wireless ADSL Router User Guide Firewall Firewall Configur ation w indow When DoS, Port Scan, or Service Filtering Protection is en abled, it will create a firewall po licy to protect your n.
DSL-G624T Wireless ADSL Router User Guide A DoS "denial-of-service" attack is cha racterized by an exp licit attempt by attackers to pr event legitimate users of a service from using that service.
DSL-G624T Wireless ADSL Router User Guide ADSL The ADSL Configuration window allows the user to set the config uration for A DSL protocols . For most ADSL accounts the default setti ngs ADSL2+(Multi-mode ) will work. This configurat ion works with all ADSL implem entations.
DSL-G624T Wireless ADSL Router User Guide ATM VCC The ATM VC Setting window is used to configure th e WAN connec tion. If you are using multiple PVCs, you can change the configur ation of any PVC in this window. To create new or additional PVCs, read the section on Multiple PVCs on page 5 .
DSL-G624T Wireless ADSL Router User Guide Wireless Management The Wireless Management window located in the Advanced directory is used to control MAC address access to the wireless access point and t o view a list of MAC addres ses th at are currently associated with t he access point.
DSL-G624T Wireless ADSL Router User Guide 5. After compiling the list of MAC add resses as desired, click the Apply button to enforce access control for the MAC addresses in the list. To remove any MAC address from the list, click the rad io bu tton in the left column of the list for the MAC address to be removed a nd click t he Apply butto n.
DSL-G624T Wireless ADSL Router User Guide Wireless Performance If you want to tweek wireless settings, click the Wireless Performance wind ow button in the Advanced directory Note It is recommended for most users to use the default Wireless LAN Performance settings.
DSL-G624T Wireless ADSL Router User Guide Tools Click the Tools tab to reveal the window buttons for various functions located in this directory. The Administrator Settings window is the first item in the Tools directory.
DSL-G624T Wireless ADSL Router User Guide Change System Password Under the Ad ministrator he ading, type the New Password and Confirm Password t o be certain you have typed it correctly. Click the Apply button to activate the new password. The System User Name remains “admin”, this cannot be changed using the web manager interf ace.
DSL-G624T Wireless ADSL Router User Guide Time The Router provides a number of option s to maintain current date and time in cluding SNTP. Time w indow To configure system time on the Router, select the method us ed to maintain time.
DSL-G624T Wireless ADSL Router User Guide Remote Log Us the Remo te Log Setting s window to set up logging to servers or co mputers that are l ocated outside the LAN or subnet of the R outer. Remote Log Settings w indow Select the Log Level from the pull-dow n menu.
DSL-G624T Wireless ADSL Router User Guide System Save or Load Configuration File Once you have configur ed the Router to your satisfaction, it is a good id ea to back up the configuratio n file to your computer.
DSL-G624T Wireless ADSL Router User Guide System Settings w indow Restore Factory Default Settings To reset the Router to its factory default settings, click the Restore button. You will b e prompted to confirm you r decision to reset the Router. The Router will reboot with th e factory default setting s including IP settings (192.
DSL-G624T Wireless ADSL Router User Guide Firmware Note Performing a Firmware Up grade can som etimes change the configuratio n settings. Be sure to back-up the Router’s configurati on settings before upgradi ng the firmware. Use the Firmware Upgrade wi ndow to load the latest firmware for th e device.
DSL-G624T Wireless ADSL Router User Guide Miscellaneous To perform a statndard Ping test for netw ork connectivity, click t he Misc. window button in the Tools directory to v iew the Miscellaneous Config uration window. Miscellaneous Configuration w indow Ping Test The Ping test functions on the WAN and LAN interfaces.
DSL-G624T Wireless ADSL Router User Guide Test The Diagnostic Test window is used to test connectivity of the Ro uter. A Ping test may be done through the local or external interface to test conn ectivity to known IP addresses. The diagnostics feature execute s a series of test of y our system soft ware and hardware connections.
DSL-G624T Wireless ADSL Router User Guide Status Use these windows to view system in formation and monit or perf ormance. Device Info Use the Device Inform ation window to quickly vi ew basic current i n form ation about the LA N and WAN inte rfaces and device inf o rmation i ncluding Firm ware Version and MAC ad dress.
DSL-G624T Wireless ADSL Router User Guide DHCP Clients DHCP Clients window 36.
DSL-G624T Wireless ADSL Router User Guide Log The system log dis plays chronological even t log data. Use the navigati on buttons to view or scroll log pages. You m ay also save a sim p le text file cont aining t he log to yo ur com puter. Click the Save Log button a nd follow the prom pts to save the file.
DSL-G624T Wireless ADSL Router User Guide Statistics Use the Traffic Statistics window to mon itor traffic on the Ethernet, ADSL, or Wireless connection. Select the interface for which you want to view packet statistics and the information will appear below.
DSL-G624T Wireless ADSL Router User Guide ADSL Use the ADSL Status window for troub leshooting the A DSL connection. ADSL Status information Help The Help tab will give basic information referring to various win dows located in the Router. To view a specific section, click on its hyperlinked name.
DSL-G624T Wireless ADSL Router User Guide A Technical Specifications General Standards: ADSL Standards • ANSI T1.413 Issue 2 • ITU G.992.1 (G.dmt) AnnexA • ITU G.992.2 (G.lite) Annex A • ITU G.994.1 (G.hs) • ITU G.992.5 Annex A ADSL2 Standards • ITU G.
DSL-G624T Wireless ADSL Router User Guide Physical and Environmental DC Inputs: Power Adapter: Input: 120V AC 60Hz Output: 12V AC, 1200mA Power Consumption: 12 Watts (max) Operating Temperature: 0° to 40°C Storage Temperature -20° to 70°C Humidity: 5% to 95% (non-condensing) Dimensions: 109 mm x 142.
DSL-G624T Wireless ADSL Router User Guide Wireless Modulation IEEE 802.11b: DQPSK, DBPSK, DSSS, and CCK IEEE 802.11g: BPSK, QPSK, 16QAM, 64QAM, OFDM 2400 ~ 2484.5MHz ISM band Frequency Channels 11 channels for United States 13 channels for Europe an Countries 13 channels for Japa n Wireless Data Rates IEEE 802.
DSL-G624T Wireless ADSL Router User Guide B Configuring IP Settings on Your Computer In order to configure y our system to recei ve IP settings from the Router it m ust fi rst have the TCP/IP prot ocol installed. If you have an Ethernet port on you r computer , it probably alread y has TCP/IP protocol installed.
DSL-G624T Wireless ADSL Router User Guide 2. In the Control Panel window, click Network and Internet Connections. Click Network and Internet Connections . 3. In the Network and Internet Connections window, click Network Connections . Click Network Connectio ns .
DSL-G624T Wireless ADSL Router User Guide 5. In the General tab of the Local Area Connection Properties window, highlight Internet Prot ocol (TCP/IP) under “Thi s connectio n uses the fol lowing it ems:” by clicking on i t once. Click on the Properties button.
DSL-G624T Wireless ADSL Router User Guide Windows 2000 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start butto n, point to Settings , and then click Control Pa nel . 2. Double-click the Network and Dial-up Connections ic on.
DSL-G624T Wireless ADSL Router User Guide Windows 95 and Window s 98 First, check for the IP protocol and, if necessary, install it: 1. In the Windows task bar, click the Start button, point to Settings , and then click Control Panel . Double-click the Network i con.
DSL-G624T Wireless ADSL Router User Guide Your computer is now ready t o use the Router’s DHCP server. Windows NT 4.0 Workstations First, check for the IP protocol and, if necessary, install it: 1. In the Windows NT task bar, click the Sta rt button , point to Settings , and th en click Control Panel .
DSL-G624T Wireless ADSL Router User Guide C Low Pass Filters for DSL Most ADSL clients will be required to install a simple device that prevents the ADSL line fr om interfering with regular telephone services. These devices are commonly referred to as microfilters or low pass filters.
DSL-G624T Wireless ADSL Router User Guide Three Port Filter Another style of filter is installed at the same point where the Router connects to the telephon e line. Only a single filter is required. The connection ports are typically labeled as follows: Line - This port connects to the wall jack.
International Offices U.S.A 17595 Mt. He rrmann Stree t Fountain Va lley, CA 92708 TEL: 1-800-326 -1688 URL: www.dlin k.com Canada 2180 Winsto n Park Drive Oakville, O ntario, L6H 5W 1 Canada TEL: 1-905-829 5033 FAX: 1-905-8295 223 URL: www.dlink .ca Europe (U.
An important point after buying a device D-Link DSL-G624T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DSL-G624T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DSL-G624T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DSL-G624T you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DSL-G624T will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DSL-G624T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DSL-G624T.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DSL-G624T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DSL-G624T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
