Instruction/ maintenance manual of the product DI-704P D-Link
Go to page of 17
Before y ou begin… Make sure that any existing Firewall Software/Devices are d isabled and/or shutdow n before beg inning install ation of y our new D-Link DI-704P Broadband R outer.
First, p lug in the powe r supply as shown. Plug the o ther end of th e power supply into the pow er sou rce. Flip the POWER togg le switch to the ON pos ition . (During a s elf-test pha se, the indicator l ights wil l flash brie fly. At the end of th e self -test, th e M1 indicator l ight will flash co ntinuously to indica te normal ope ration.
Make sure that TCP/IP protocol ha s been installed in your com puter . Next, set the TCP/IP protocol to “Obtain an I P Address automa tically” by doing the following : • Go to Start>Settings .
• Use the “pu ll- down menu” on thi s screen to display the Etherne t card that i s installed in your com puter and connected to the DI- 704P. The IP Address (for th e Ethern et network ada pter) that appears in t his window must be betwe en 192.
Type “ad min” in the “System Passwo rd” fie ld. Click on “Log in ” Click on “Setup ” -5- Configuring the DI-704P with the W eb br owse r.
Click “Change” (Please see sepa rate inst ructions b elow for D SL and Cable u sers.) For DSL user s: Select “ PPP over Ethernet” if y ou are using a PPPoE client to connect to your DSL prov ider (conta ct your DS L prov ider if you a re uncerta in.
For DSL users (con tin ued): Enter th e PPPoE Account and Password that y our ISP ass igned to you. Lea ve t he pas swor d fi eld blan k if you d o n ot wa nt t o cha nge the pas swor d. Input the PPPoE Service Name if your I SP requires i t. Set the Max imum Id le Time.
For Cable U sers: Select “Dynam ic IP Address.” Click “Save.” Enter th e “Host Name ” giv en to you by y our cable p rovider (for exam ple, “@ Hom e.”) For informa tion on conf iguring a back -up dial-u p modem, please s ee the “Configura tion” sect ion of your Use r’s Manual.
To check th e connec tion, op en the web browse r and g o to your fav orite web site. If you are un able to brows e, please do th e following : 1. Refer to Append ix B to check your conne ction. 2. Use “Help” on t he Main Menu. 3. Refer to the troublesho oting section in the use r’s manual.
NOTE: Installing the Pri nt Server softwa re i s only necessary if you p lan to use the Pr int Server function of th e D-Link DI-704P. If you choos e to use the pr int server function , plug the pr inter cable from you r print er into t he printer por t on the DI-704P, i f you have not alre ady done so.
To sele ct the def ault folde r, Click “N ext” Note: It is recommended that you cl ick “Nex t” in th e above window. Howev er, if necessary, Cl ick “Browse” to se lect a n alternat e folde r. When this window is d isplayed, Click “ Finish ,” to comp lete the Setu p.
Select “Yes , I want t o restart my computer.” Click “ OK” After th e compu ter has res tarted, th e Print Server software in stal lation is c omplet e. Note: If you r printer is not installed, go t o START>SETTINGS>PRINTERS . Double C lick on the “Add Print er” icon.
Choose the “Deta ils” tab. (In Windows 2000 or NT, choose the “Ports” tab.) At th e “Add Port” p ull-down m enu, choose “D-Link L PT port (Prin t Server.)” Please m ake sure th e proper prin ter driver is selec ted . Click “Port S ettings.
Type in the “IP add ress” of th e DI- 704P. Click “ OK” In the prev ious window, m ake sure the setting s are correc t. Click “ OK” You have completed config uring your prin ter. Go to START>SETTINGS>CO NTROL P ANEL Double-cl ick the “networ k” icon.
To manually input th e IP Addres s, please do the follow ing: In t h e “TCP/IP Properties” window, under the “I P Address” ta b, Select “Specify an IP address. ” The defau lt IP Address of t his product is 192.168.0.1 Please use 192.1 68.0.
From the desk top, go to Start>Run Type “command” in the box. Click “ OK” The follow ing MS- DOS Prompt window will appea r. Type “ping 192.
Building Networks for People Printed in T ai wan.
An important point after buying a device D-Link DI-704P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought D-Link DI-704P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data D-Link DI-704P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, D-Link DI-704P you will learn all the available features of the product, as well as information on its operation. The information that you get D-Link DI-704P will certainly help you make a decision on the purchase.
If you already are a holder of D-Link DI-704P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime D-Link DI-704P.
However, one of the most important roles played by the user manual is to help in solving problems with D-Link DI-704P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device D-Link DI-704P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
