EN
3M logo
Official user manual

3M 4407

28 pages·377 KB·Projector·PDF·EN
3M 4407
Table of Contents 26 sections 4400 KMR version · Table of Contents · Introduction · Part Numbers · … ShowHide
Page 1 of the 3M 4407 user manual — 4400 Series Overhead Projector
Page 1 · click to enlarge
Page 1

4400 Series Overhead Projector

Illustrated Parts Breakdown

For: 4405 4406 4407 4408 4410 4415 4420

3M 4407 — 4400 Series Overhead Projector diagram (page 1)
Fig. 1 · 4400 Series Overhead Projector

3M Visual Systems Division 6801 River Place Boulevard Austin, Texas 78726-9000

Printed in U.S.A. 3M 5/95 78-6970-5570-1

Page 3 of the 3M 4407 user manual — Figure 7-2. Machine Identification Plate
Page 3 · click to enlarge
Page 3

Introduction

When ordering parts, include part identification number, description, quantity and the following information:

This Illustrated Parts Breakdown (IPB) contains the information necessary to locate and identify specific parts of the 4400 Series Overhead Projectors.

1. Product Name: The specific version number of the projector.

Part Numbers

2. Model Number/Alpha Code: The series number of the projector followed by a three or four character alpha code identifier. The Alpha Code indicates the design level, specific product characteristics, power cord or distribution specific to a country.

All components available on a replacement basis are listed with their 3M identification number. The parts identification list opposite each illustration provides the description adequate to identify components.

Locating and Identifying a Part

3. MFG Code: The date the projector was manufactured. See example below:

If physical appearance and general location of an item are known:

6. Use the Overview illustration to determine which section includes the item.
MFG Code LetterDigit L19921Jan – Mar M19932Apr – Jun A19943Jul – Sep C19954Oct – Dec D19961Jan – Mar
7. Refer to the section and locate the item on the exploded view illustration.

The part identification numbers provided in this manual are from the most current data available. Make sure part identification numbers for your component have not been amended by changes and updates made to your 4400 Series Overhead Projector.

4. Lamp: The electrical rating of the lamp.

Machine Identification Plate

5. S/N: The serial number assigned to this projector.

The Machine Identification Plate is located on the bottom side of each projector and lists specific information that is needed when calling for technical assistance or ordering parts.

For part orders contact:

DealersRefer to Dealers Guide 3M Subsidiaries: Contact Export Operations Retail Customers:
3M 4407 — Machine Identification Plate diagram (page 3)
Fig. 2 · Machine Identification Plate
FAX1-800-852-3917 Telephone: 1-800-328-2883

Figure 7-2. Machine Identification Plate

i 3M 1995

Page 4 of the 3M 4407 user manual — Introduction
Page 4 · click to enlarge
Page 4

This page intentionally left blank.

i 3M 1995

Page 5 of the 3M 4407 user manual — IMPORTANT NOTICE
Page 5 · click to enlarge
Page 5

Table of Contents

Section No. Title Page

0 Overview 3 1 Open Singlet Head Assembly 4 2 Closed Singlet Head Assembly 6 3 Clamshell Head Assembly 8 4 Arm and Focus Assembly 10 5 Top Cover Assembly 12 6 Base Assembly 14 7 Front Cover Assembly 16 8 Lamp Housing Assembly 18 9 Wire Jumpers 20

Appendix A Specifications 23

IMPORTANT NOTICE

3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS. New and reconditioned parts are covered by the same 3M new parts limited warranty.

Page 6 of the 3M 4407 user manual — Introduction
Page 6 · click to enlarge
Page 6

This page intentionally left blank.

Page 7 of the 3M 4407 user manual — Section 0 OVERVIEW
Page 7 · click to enlarge
Page 7

Section 0 OVERVIEW

3M 4407 — Section 0 OVERVIEW diagram (page 7)
Fig. 3 · Section 0 OVERVIEW

Closed Singlet Head Assembly (See Section 2)

Open Singlet Head Assembly (See Section 1)

3M 4407 — Section 0 OVERVIEW diagram (page 7)
Fig. 4 · Section 0 OVERVIEW

Arm and Focus Assembly (See Section 4)

Top Cover Assembly (See Section 5)

Base Assembly (See Section 6)

3M 4407 — Section 0 OVERVIEW diagram (page 7)
Fig. 5 · Section 0 OVERVIEW

Front Cover Assembly (See Section 7)

Base Assembly (See Section 6)

Clamshell Head Assembly (See Section 3)

Top Cover Assembly (See Section 5)

Arm and Focus Assembly (See Section 4)

Front Cover Assembly (See Section 7)

Base Assembly (See Section 6)

Page 8 of the 3M 4407 user manual — Section 1 OPEN SINGLET HEAD ASSEMBLY
Page 8 · click to enlarge
Page 8

Section 1 OPEN SINGLET HEAD ASSEMBLY

Page 9 of the 3M 4407 user manual — Section 1 OPEN SINGLET HEAD ASSEMBLY
Page 9 · click to enlarge
Page 9

Section 1 OPEN SINGLET HEAD ASSEMBLY

0 78-8079-9151-4 HEAD ASSEMBLY, Open Singlet (Complete) 1 1 78-8014-8951-5 LENS, Wide Angle (293mm) 1 2 78-8064-1646-3 TUBING, Lens 3 3 78-8096-5798-0 MIRROR ASSEMBLY, Open Singlet, Mirror 1 4 78-8064-1605-9 SPRING, Mirror Damping 1 5 78-8003-9762-8 NUT, U-Type, 8-32 1 6 78-8079-8802-3 COVER, Head, Singlet 1 7 26-1008-5592-8 SCREW, Taptite, M3.5 x 8 1 8 26-1005-9570-5 SCREW, Mach. 8-32 x 7/16 1 9 26-1004-0460-2 WASHER, Plain Nylon 1 10 78-8079-8803-1 BRACKET, Lens, Singlet 1

Page 10 of the 3M 4407 user manual — Section 2 CLOSED SINGLET HEAD ASSEMBLY
Page 10 · click to enlarge
Page 10

Section 2 CLOSED SINGLET HEAD ASSEMBLY

Page 11 of the 3M 4407 user manual — Section 2 CLOSED SINGLET HEAD ASSEMBLY
Page 11 · click to enlarge
Page 11

Section 2 CLOSED SINGLET HEAD ASSEMBLY

0 78-8079-9152-2 HEAD ASSEMBLY, Closed Singlet (Complete) 1 1A 78-8096-5751-9 COVER, Head, Closed Singlet 1 1B 78-8096-5812-9 COVER, Head, Closed Singlet (Xerox) 1 2 78-8096-5767-5 ACCESS CAP, Closed Single 1 3 26-1009-9888-4 WASHER, Spring 2 4 78-8096-5757-6 SCREW, Shoulder Head, Closed Singlet 2 5 78-8096-5797-2 MIRROR ASSEMBLY, Closed Singlet 1 6 26-1009-9749-8 SCREW, Taptite, Sems, M4 X 10 2 7 78-8096-5752-7 BRACKET, Head, Closed Singlet 1 8 78-8064-1646-3 TUBING, Lens 1 9A 78-8014-8951-5 LENS, Wide Angle (293 mm) 1 9B 78-8096-5792-3 LENS, Long Throw (355mm) 1 10 78-8096-5754-3 RETAINER, Glass, Head, Closed Singlet 1 11 78-8096-5753-5 GLASS, Closed Singlet Head, 1 12 26-1002-5268-8 SCREW, Machine, 6-32x3/8 1 13 26-1001-7983-2 NUT, Keps, 6-32 1

Page 12 of the 3M 4407 user manual — Section 3 CLAMSHELL HEAD ASSEMBLY
Page 12 · click to enlarge
Page 12

Section 3 CLAMSHELL HEAD ASSEMBLY

3M 4407 — Section 3 CLAMSHELL HEAD ASSEMBLY diagram (page 12)
Fig. 6 · Section 3 CLAMSHELL HEAD ASSEMBLY
Page 13 of the 3M 4407 user manual — Section 3 CLAMSHELL HEAD ASSEMBLY
Page 13 · click to enlarge
Page 13

Section 3 CLAMSHELL HEAD ASSEMBLY

1 78-8096-5760-0 COVER, Head, Clamshell 1 2A 78-8096-5801-2 MIRROR ASSEMBLY, Clamshell Head, Singlet 1 2B 78-8096-5799-8 MIRROR ASSEMBLY, Clamshell Head, Triplet 1 3 78-8096-5790-7 RING, Adapter, Triplet Lens 1 4A 78-8014-8951-5 LENS, Singlet (293mm) 1 4B 78-8064-1833-7 LENS, Triplet (340mm) 1 5 78-8096-5761-8 BRACKET, Head 1 6A 78-8096-5757-6 SCREW, Shoulder Head (See Note 1) 2 6B 26-1007-5427-9 SCREW, Plastite, 6-19 X 3/8 (See Note 2) 2 7A 77-8001-3672-1 WASHER, Spring (See Note 1) 2 7B 26-1003-3672-1 WASHER, Nylon (See Note 1) 2 7C 78-8096-5802-0 BUSHING, Flange (See Note 2) 2 8 26-1009-9749-8 SCREW, Taptite, Sems, M4 X 10 2 9 26-1009-9788-6 CLIP, Mirror 4 10 78-8057-4150-7 LABEL, Projection Mirror 1 11 78-8064-1646-3 TUBING, Lens 3

1. Used on: Mfg. Code A3 and earlier. 2. Used on: Mfg. Code A3 and up.
Page 14 of the 3M 4407 user manual — Section 4 ARM AND FOCUS ASSEMBLY
Page 14 · click to enlarge
Page 14

Section 4 ARM AND FOCUS ASSEMBLY

Page 15 of the 3M 4407 user manual — Section 4 ARM AND FOCUS ASSEMBLY
Page 15 · click to enlarge
Page 15

Section 4 ARM AND FOCUS ASSEMBLY

1 78-8096-5758-4 BRACKET, Head 1 2 26-1002-6172-1 SCREW, Plastite, M4.7 X 10 2 3 78-8064-1555-6 GUIDE, Gear Rack 1 4 78-8064-1552-3 GEAR RACK, Focus 1 5 78-8064-1522-6 GEAR, Focus 1 6 26-1002-4971-8 SCREW, Plastite, 6-19 X 1/2 4 7 78-8064-1556-4 SLIDE, Focus 1 8 78-8096-5744-4 ARM, Detachable 1 9A 78-8096-5743-6 POST (See Note 1) 1 9B 78-8096-5788-1 POST, Extended (See Note 2) 1 10 78-8064-1506-9 COVER, Focus 1 11 78-8064-1601-8 KNOB, Focus 1 12 78-8079-8811-4 BOLT, Post 2 13 26-1009-9690-4 SCREW, Crimptite, 10-24 X 1/2 3 14 78-8096-5787-3 BRACKET, Stiffening Arm 1 15 78-8096-5804-6 WRENCH 1

1. Used on: all versions except as noted. 2. Used on: 4406 AJE, AJEX, 4415, 4420 ABCJ, AHCA, AHCC, AHCN, AHCR, AHCS, AHCU and AHCZ.
Page 16 of the 3M 4407 user manual — Section 5 TOP COVER ASSEMBLY
Page 16 · click to enlarge
Page 16

Section 5 TOP COVER ASSEMBLY

3M 4407 — Section 5 TOP COVER ASSEMBLY diagram (page 16)
Fig. 7 · Section 5 TOP COVER ASSEMBLY
Page 17 of the 3M 4407 user manual — Section 5 TOP COVER ASSEMBLY
Page 17 · click to enlarge
Page 17

Section 5 TOP COVER ASSEMBLY

1 78-8064-1473-2 GLASS, Stage 1 2 78-8096-5750-1 SCREW, Cover 1 3A 78-8096-5701-4 COVER, Top (10.5 X 10.5) 1 3B 78-8096-5729-5 COVER, Top (A4) (Used on all A4 version except as noted below.) 1 3C 78-8096-5824-4 COVER, Top (A4 Reworked) (See Note 1) 1 4 78-8003-8593-8 RING, Retaining, Rotor Clip 1 5 78-8096-5731-1 WASHER, Plastic 1 6 26-1001-7983-2 NUT, Keps, 6-32 1 7A 78-8096-5791-5 FRESNEL (Used on all versions except 4420) 1 7B 78-8097-3637-0 FRESNEL (Used on 4420 only) 1 8 78-8064-1531-7 RETAINER, Stage Glass 1 9 26-1002-6172-1 SCREW, Plastite, M4 .7 X 10 2 10 26-1002-4971-8 SCREW, Plastite, 6-19 X 1/2 1 11 78-8096-5717-0 SPRING, Cover Detent 1 12 78-8096-5786-5 CLIP, Fresnel 1 13 78-8096-5822-8 FRESNEL, Retainer, Back 1 14 78-8096-5814-5 FRESNEL, Retainer, Front 1 15 78-8096-5809-5 LABEL, Lampchanger 1

1. Used on: 4405 AAAB, ABAJ, AHAA, AHAC, AHAN, AHAR, AHAS, AHAU, and AHAZ 4408 AADB and ABDJ
Page 18 of the 3M 4407 user manual — Section 6 BASE ASSEMBLY
Page 18 · click to enlarge
Page 18

Section 6 BASE ASSEMBLY

17 18 11

Page 19 of the 3M 4407 user manual — Section 6 BASE ASSEMBLY
Page 19 · click to enlarge
Page 19

Section 6 BASE ASSEMBLY

1 78-8096-5713-9 BAFFLE 1 2 26-1008-5592-8 SCREW, Taptite, M3.5 X 8 10 3 78-8079-8810-6 BRACKET, Backup, Fixed Post 1 4 78-8096-5808-7 BASE 1 5 78-8079-8809-8 BLOCK, Post 1 6 78-8096-5712-1 BASE, Floor 1 7 26-1008-5211-5 FOOT, Mounting 4 8 78-8073-6942-2 SCREW, Foot 4 9 26-1002-5268-8 SCREW, Machine, 6-32 X 3/8 1 10 26-1001-7983-2 NUT, Keps, 6-32 1 11A 78-8096-5807-9 LABEL, Lamp Replacement, EHJ 1 11B 78-8096-5771-7 LABEL, Lamp Replacement, FNT 1 11C 78-8096-5739-4 LABEL, Lamp Replacement, EYB 1 11D 78-8096-5816-0 LABEL, Lamp Replacement, Xerox 1 12 34-7033-0130-8 LABEL, Blank (Nameplate) 1 13 78-8096-5770-9 THERMOSTAT, Safety 1 14 26-1001-6189-7 FUSE CARRIER (See Note 1) 1 15A 26-1005-9599-5 FUSE, 5 Amp (See Note 2) 1 15B 26-1008-6347-6 FUSE, 4 Amp (See Note 3) 1 16 26-1011-2502-4 FUSEHOLDER (See Note 1) 1 17A 78-8073-7212-9 SWITCH, Hi/Lo 1 17B 78-8079-9134-0 SWITCH, 127V/220V (Brazil) 1 18 78-8079-9138-1 LABEL, Switch (Brazil) 1 19A 78-8079-9201-7 LABEL, Service (Australia) 1 19B 78-8073-3292-5 LABEL, Service (New Zealand) 1 20 78-8064-1809-7 LABEL, Caution (Australia) 1 Not Shown 78-8003-8335-4 TIE, Strap AR

1. Used on: 4405 AAAB, AHAS, AHAU, AHAZ, 4408 AADB, AHDZ, AHDS, AHDU, 4420 AHCS, AHCU and AHCZ Mfg. Code A4 and later. 2. Used on: 4405 AAAB and 4408 Mfg. Code A4 and later. 3. Used on: all versions except 4405 AAAB and 4408 AADB Mfg. Code A4 and later.
Page 20 of the 3M 4407 user manual — Section 7 FRONT COVER ASSEMBLY
Page 20 · click to enlarge
Page 20

Section 7 FRONT COVER ASSEMBLY

3M 4407 — Section 7 FRONT COVER ASSEMBLY diagram (page 20)
Fig. 8 · Section 7 FRONT COVER ASSEMBLY
Page 21 of the 3M 4407 user manual — Section 7 FRONT COVER ASSEMBLY
Page 21 · click to enlarge
Page 21

Section 7 FRONT COVER ASSEMBLY

1A 78-8096-5813-7 COVER, Front (Xerox) 1 1B 78-8096-5710-5 COVER, Front 1 2 78-8079-8797-5 PLATE, Cord, Small (Gray) 1 3A 78-8065-8221-5 POWER CORD, Australia 1 3B 78-8096-5775-8 POWER CORD, Europe, 15 Ft 1 3C 78-8065-8545-7 POWER CORD, Italy, 10 Ft. 1 3D 78-8096-5779-0 POWER CORD, Japan, 10 Ft 1 3E 78-8065-8280-1 POWER CORD ASSEMBLY, South Africa 1 3F 78-8096-5777-4 POWER CORD, Swiss, 15 Ft 1 3G 78-8079-8822-1 POWER CORD, US, (120V), 10 Ft. 1 3H 78-8096-5776-6 POWER CORD, U.K. 15 Ft 1 4A 78-8096-5702-2 MOTOR, (230V) 1 4B 78-8096-5703-0 MOTOR, (120V) 1 4C 78-8096-5759-2 MOTOR, (100V) 1 5A 78-8096-5815-2 SWITCH, Rocker (Xerox) 1 5B 78-8096-5718-8 SWITCH, Rocker (See Note 1) 1 6A 78-8079-8921-1 TRANSFORMER, FNT (100V) 1 6B 78-8079-8860-1 TRANSFORMER, FNT (230/240V) 1 6C 78-8079-8861-9 TRANSFORMER, FNT (240/250V) 1 6D 78-8096-5818-6 TRANSFORMER, 127/220V, Brazil 1 7 78-8064-1834-5 DIODE , Inline 1 8 78-8079-9194-4 BLADE, Fan 1 9A 78-8096-5719-6 BRACKET, Motor (120V versions) 1 9B 78-8096-5730-3 BRACKET, Motor (220/240V versions) 1 10 78-8096-5726-1 MICROSWITCH (See Note 1) 1 11 78-8096-5728-7 BRACKET, Transformer 1 12 78-8096-5740-2 SPRING, Torsion 1 13 26-1008-4567-1 SCREW, Type BT, 4-24 X 3/4 2 14 26-1009-8678-0 SCREW, Taptite, M4 X 60, 4 15 26-1002-4971-8 SCREW, Plastite, 6-19 X 1/2 2 16 26-1002-4967-6 SCREW, Plastite, 4-20 X 3/8 2 17 26-1008-5592-8 SCREW, Taptite, M3.5 X 8 8 18 78-8054-1019-4 INSULATOR, Fuse 1 19 26-1005-6624-4 FUSEHOLDER 1 20 26-1008-6347-6 FUSE, 4 Amp 1 21 78-8033-1666-6 CLIP, Tinnerman 1 22 26-1004-2053-3 WASHER, Lock, Internal/External Tooth, #8 2 23 78-8073-7127-9 RESISTOR 1 24 78-8005-1147-5 CLIP 1 25 26-1005-4113-0 CLIP, Clamp 1 26A 78-8079-9018-5 LABEL, Fuse, 4Amp 1 26B 78-8057-4184-6 LABEL, Fuse, 5Amp 1 27 78-8096-5817-8 SWITCH, ON/OFF (See Note 2) 1

1. Used on: OUS versions with Mfg. Code C1 and earlier. 2. Used on: OUS versions with Mfg. Code C1 and up.
Page 22 of the 3M 4407 user manual — Section 8 LAMP HOUSING
Page 22 · click to enlarge
Page 22

Section 8 LAMP HOUSING

3M 4407 — Section 8 LAMP HOUSING diagram (page 22)
Fig. 9 · Section 8 LAMP HOUSING
Page 23 of the 3M 4407 user manual — Section 8 LAMP HOUSING
Page 23 · click to enlarge
Page 23

Section 8 LAMP HOUSING

1A 78-8096-5725-3 LAMP, Projection, EYB, 360W, 82V 1 1B 78-8054-1175-4 LAMP, Projection, FNT, 275W, 24V 1 1C 78-8062-0930-6 LAMP, Projection, EHJ, 250W, 24V 1 2 78-8079-9053-2 SPRING, Catch 1 3 78-8096-5709-7 LENS, Condenser, 40mm 1 4A 78-8096-5716-2 SOCKET, Lamp, TP61 1 4B 78-8096-5789-9 SOCKET, EYB (Black Leads) 1 5 78-8096-5720-4 REFLECTOR 1 6 78-8096-5734-5 BRACKET, Reflector, Dual 1 7 78-8096-5723-8 BRACKET, Condenser 1 8 78-8096-5747-7 BRACKET, Deflector 1 9 78-8096-5727-9 ROD, Pivot 1 10 78-8096-5745-1 BRACKET, EYB, Socket, Dual 1 11 78-8096-5785-7 SOCKET ASSEMBLY (FNT Dual) 1 12 26-1008-5592-8 SCREW, Taptite, M3.5 X 8 3 13 26-1002-5086-4 SCREW, Taptite, 4-40 X 3/8 2 14A 12-7992-2978-1 SPRING, Compression 1 14B 12-7992-3100-1 SPRING, Compression 1 15 78-8096-5749-3 SHAFT, Over Center 1 16 78-8096-5768-3 SWITCH, Lampchanger 1 17 26-1002-6208-3 SCREW, Taptite, M3 X 16 2 18 78-8656-5801-3 RING, Push-on, 1 19 26-1004-9300-1 SCREW, Taptite, M3 X 6 1 20 78-8096-5793-1 TUBING, Insulation 1 21A 78-8096-5810-3 BRACKET, Reflector, EYB (See Note 1) 1 21B 78-8096-5722-0 BRACKET, Reflector, EYB 1 22 78-8096-5811-1 SOCKET ASSEMBLY, FNT Single 1

1. Used on: 4405 AAAD,AJA, 4406 AJE, AJEX and 4407 AJF.
Page 24 of the 3M 4407 user manual — Section 9 WIRE JUMPERS
Page 24 · click to enlarge
Page 24

Section 9 WIRE JUMPERS

Page 25 of the 3M 4407 user manual — Section 9 WIRE JUMPERS
Page 25 · click to enlarge
Page 25

Section 9 WIRE JUMPERS

1 78-8096-5737-8 JUMPER 8 (Qty 2 EYB versions) 1 2 78-8096-5738-6 JUMPER 15 (Used on EYB versions only.) 1 3 78-8096-5741-0 JUMPER, Ground 7 1 4 78-8079-8973-2 JUMPER, 10” (Switch/Fuse) (Used on FNT versions only.) 1 5 78-8097-3619-8 JUMPER, 5” Black (Used on FNT versions only.) 1 6 78-8097-3603-2 JUMPER, 8” Grey 1 7 78-8079-8967-4 JUMPER, 8.75” (Not shown) 2 8 78-8079-8966-6 JUMPER 1 9 78-8065-8268-6 WIRE, Lead, Fuse, Kill Switch (Used on FNT versions only.) 1 10 78-8065-8273-6 WIRE, Lead, Power Supply, Kill Switch (Used on FNT versions only.) 1

Page 26 of the 3M 4407 user manual — Parts List
Page 26 · click to enlarge
Page 26

This page intentionally left blank.

Page 27 of the 3M 4407 user manual — Appendix A SPECIFICATIONS
Page 27 · click to enlarge
Page 27

Appendix A SPECIFICATIONS

Stage Size Head Type

Color Tuning Post Type

Lamp Type Handle Lamp Control

Lamps Installed Fresnel Power Fuse Amps

Country Power Cord Model Alpha Stock Number Voltage/Hz Agency

Australia Australian 4405 AHAA 78-9236-5916-9 240/50 SAA A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

New Zealand Australian 4405 AHAN 78-9236-5923-5 240/50 A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Australia Australian 4408 AHDA 78-9236-5930-0 240/50 SAA A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

New Zealand Australian 4408 AHDN 78-9236-5937-5 240/50 A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Australia Australian 4420 AHCA 78-9236-5944-1 240/50 SAA A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

New Zealand Australian 4420 AHCN 78-9236-5951-6 240/50 A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

Europe Std. European 4405 AHAS 78-9236-5913-6 230/50 EUROPEAN A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Europe Std. European 4408 AHDS 78-9236-5927-6 230/50 EUROPEAN A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Europe Std. European 4420 AHCS 78-9236-5941-7 230/50 EUROPEAN A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

Brazil Japan 4405 AAAB 78-9236-6006-8 127/220/50 A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer None 3 No

Japan Japan 4405 ABAJ 78-9236-5917-7 100/50/60 MITI A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 0 No

Brazil Japan 4408 AADB 78-9236-6008-4 127/220/50 A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 4.5 No

Japan Japan 4408 ABDJ 78-9236-5931-8 100/50/60 MITI A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A No

Japan Japan 4420 ABCJ 78-9236-5945-8 100/50/60 MITI A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A No

Chile Other 4405 AHAC 78-9236-5926-8 230/50 A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Chile Other 4408 AHDC 78-9236-5940-9 230/50 A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Chile Other 4420 AHCC 78-9236-5954-0 230/50 A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

South Africa South Africa 4405 AHAR 78-9236-5918-5 240/50 SABS A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

South Africa South Africa 4408 AHDR 78-9236-5932-6 240/50 SABS A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

South Africa South Africa 4420 AHCR 78-9236-5946-6 240/50 SABS A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

Switzerland Swiss 4405 AHAZ 78-9236-5915-1 230/50 SEV A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Switzerland Swiss 4408 AHDZ 78-9236-5929-2 230/50 SEV A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

Switzerland Swiss 4420 AHCZ 78-9236-5943-3 230/50 SEV A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

U.K. 4405 AHAU 78-9236-5914-4 240/50 EUROPEAN A4 Open Singlet No Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

U.K. 4408 AHDU 78-9236-5928-4 240/50 EUROPEAN A4 Open Singlet Yes Internal Fixed FNT No None 1 4400 SE CL Transformer T4A 1.7 No

U.K. 4420 AHCU 78-9236-5942-5 240/50 EUROPEAN A4 Open Triplet Yes Internal Fixed FNT No None 1 9800 DE CL Transformer T4A 1.7 No

Show 5 more labels / short text on this page
Lamp Changer · Cord Storage · United Kingdom · United Kingdom · United Kingdom
Page 28 of the 3M 4407 user manual — Appendix A SPECIFICATIONS
Page 28 · click to enlarge
Page 28

Cord Storage Amps Fuse Power Fresnel Lamps Installed Lamp Control Handle Lamp Type Post Type Color Tuning Lamp Changer Head Type Stage Size Agency Voltage/Hz Stock Number Model Alpha Power Cord

Saudi Arabia United States 4405 AAAD 78-9236-5921-9 127/60 10.5 Open Singlet No Internal Fixed EYB No None 1 4400 SE CL Diode/ Resistor

None 4.5 No

United States United States 4405 AJA 78-9236-5909-4 120/60 UL/CSA 10.5 Open Singlet No Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

United States United States 4406 AJE 78-9236-6007-6 120/60 UL/CSA 10.5 Closed Singlet No Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

United States 4406 AJEX 78-9236-6051-4 120/60 10.5 Closed Singlet No Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

United States United States 4407 AJF 78-9236-5910-2 120/60 UL/CSA 10.5 Closed Singlet No Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

Saudi Arabia United States 4408 AADD 78-9236-5935-9 127/60 10.5 Open Singlet Yes Internal Fixed EYB No None 1 4400 SE CL Diode/ Resistor

None 4.5 No

United States United States 4410 AJB 78-9236-5911-0 120/60 UL/CSA 10.5 Closed Singlet Yes Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

United States United States 4415 AJG 78-9236-6026-6 120/60 UL/CSA 10.5 Closed Singlet Yes Internal Fixed EYB No None 1 4400 SE CL Diode None 4.5 No

Country · Xerox Distribution

Ask about the 3M 4407

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the 3M 4407

Be the first to ask — other owners or our team will answer.

Original document

3M 4407 manual PDF

28 pages·377 KB·Projector·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…