Instruction/ maintenance manual of the product SRCD-4400 Curtis
Go to page of 9
MEMORY STOP ST./MO/ REPEAT BAND PRESET -UP PLL REMOTE CONTROL SRCD-4400 INSTRUCTION MANUAL SRCD4400 POR T ABLE CD/CD-R/RW PLA YER with CASSETTE RECORDER and AM/FM PLL DIGIT AL TUNER TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSERTED T O PREVENT BLADE EXPOSURE.
PREP ARA TION FOR USE Unpacking and Setup * Carefully remove the unit from the display carton and remove all packing material from the unit itself. * Remove any descriptive labels that may be found on either the front or top cabinet of the unit. Do not remove any labels located on either the back or button cabinet of the unit.
Battery Operation The battery compartment is located on the back of the cabinet. * Remove the battery compartment door by pressing downward on the two tabs as shown in figure below . * Insert 8 D size (UM-1) batteries into the battery compartment as shown in figure 2 below.
MEMORY STOP ST ./MO/ REPEAT BAND PRESET -UP PLL REMOTE CONTROL SRCD-4400 Remote Control Control Locations , , , 22. MEMORY Button 23. CD PLA Y/P AUSE/PRESET -UP Button 24. CD Skip/Reverse ( ) Button 25. STOP Button 26. FM S tereo/Mono/CD REPEA T Button 27.
PRE-SETTING ST A TIONS IN THE TUNER MEMOR Y This system includes a 30 station preset memory . Y ou can store up to 15 FM stations and 15 AM stations in the tuner memory for immediate recall. The procedure for storing stations in memory is as follows: 1.
1 2 789 1 2 3 4 6 NORMAL PLA YBACK PLA YING CD/CD-R/RW DISCS 5 Set the VOLUME Control to a low setting. Place a disc on the center CD/ CD-R/RW spindle, with the printed label side facing up. Close the CD compartment door. Adjust the VOLUME Playback will continue until all the tracks on the disc have been played.
Programmed Playback The CD Player in this unit has a 16 track programmable memory which allows you to program up to 16 tracks on any disc for playback in any desired order.
When you are ready to begin recording, press the cassette Record ( ) Button. The cassette Play ( ) Button will also engage. The tape will begin moving and all of the material from your selected source will be recorded on the tape.
CARE AND MAINTENANCE Caring for Comp act Discs * Treat the disc carefully . Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny , unprinted side of the disc. * Do not attach adhesive tape, stickers, etc. T o the disc label.
An important point after buying a device Curtis SRCD-4400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Curtis SRCD-4400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Curtis SRCD-4400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Curtis SRCD-4400 you will learn all the available features of the product, as well as information on its operation. The information that you get Curtis SRCD-4400 will certainly help you make a decision on the purchase.
If you already are a holder of Curtis SRCD-4400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Curtis SRCD-4400.
However, one of the most important roles played by the user manual is to help in solving problems with Curtis SRCD-4400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Curtis SRCD-4400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
