Instruction/ maintenance manual of the product RCD926 Curtis
Go to page of 9
RCD926 WARNING DO NOT OPEN RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT OPEN CAUTION The lig htning flash w ith arro - whead symbol,within an equ- ilateral triangle is inte nded to.
English English 12 RCD926 MINI HIFI SYSTEM WITH TURNT ABLE, 3-CD CHANGER, AM/FM-STEREO RADIO, DOUBLE AUTOSTOP CASSETTE AND REMOTE CONTROL. INSTRUCTION MANUAL Please read this instruction manual carefully and familiarize yourself with your new Hifi System before using it for the first time.
English English CONNECTING TO POWER Before switching on make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. For your own safety read the following instructions carefully before attempting to connect this unit to the mains.
English English 56 AM/FM TUNER OPERA TION • Press the S T ANDBY Button to ON . The Standby indicator will go o f f. • Set the Function Selector to the TUNER position. • Select the desired frequency band with the Radio Band Selector . • Tune to the desired radio station by turning the Tuning control .
English English SYNCHRONIZED T APE-TO-T APE RECORDING NORMAL SPEED TAPE-TO-TAPE RECORDING • Insert a fully rewound prerecorded cassette into T ape Deck B. • Insert a fully rewound blank cassette tape into T ape Deck A. • Set the Function Selector to the T APE position and keep the DUBBING Selector in the “high” position.
English English 91 0 ST ARTING DISC PLA Y FROM THE BEGINNING OF A P ARTICULAR TRACK • Press the Forward or Reverse Skip Track buttons UP/DOWN to select the desired track. The number of the selected track will be shown on the CD display . Press the PLA Y/P AUSE button to start play .
English English 11 1 2 Select the track you wish to programm by pressing SKIP FORWARD button until the desired track appears in the display . • Repeat the above steps until you have entered up to 32 tracks into the memory . • When you are finished programming press the PLA Y/P AUSE button to begin programmed playback.
English English 13 14 7. Gently lower the tone arm onto the record with the Tonearm Lift lever to start playing. 8. When the record is finished the turntable will automatically stop. 9. To stop the record whilst it is playing. Press the Stop Button, The the turntable will automatically will stop.
English 15 16 SPECIFIC A TIONS Power Supply A C : 120V ~ 60Hz Radio Frequency Coverage FM : 87.5 - 108MHz AM : 5 30 - 1 71 0kHz Recording System Recording System: AC Bias CD Player Pick Up: 3-Beam. Semiconductor Laser Encoding: 16-Bit Linear , 2 x oversampling Design and specifications are subject to change without notice.
An important point after buying a device Curtis RCD926 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Curtis RCD926 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Curtis RCD926 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Curtis RCD926 you will learn all the available features of the product, as well as information on its operation. The information that you get Curtis RCD926 will certainly help you make a decision on the purchase.
If you already are a holder of Curtis RCD926, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Curtis RCD926.
However, one of the most important roles played by the user manual is to help in solving problems with Curtis RCD926. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Curtis RCD926 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
