Instruction/ maintenance manual of the product DVD DVD1072 Curtis
Go to page of 31
PROGRESSIVE SCAN mp 3 INSTR UCTION MANU AL IMPORTANT READ THESE INSTRUCTIONS BEFORE USE AND RETAIN FOR FUTURE REFERENCE. 2 c h output DVD1072.
SAFETY INFORMA TION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION : To reduce the risk of fire and electric shock, do not remove the cover (or The.
Installation Warnings Ventilation Slots and openings in the case are provided for ventilation to ensure reliable operation of the video product and to protect it from overheating. These openings must not the blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or heat register.
CONTENTS INTRODUCTION SYSTEM CONNECTION ............................................... 6 GETTING STARTED FUNCTION BUTTONS ON SCREEN DISPLAY SETUP MENU TROUBLE SHOOTING ........................................ 25-26 About DVD .........................
1 ESSENTIAL SETUP Video outputs The player is equipped with the following video output ports: Composite Video and S-Video always active, does not need setting. ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
THE REMOTE CONTROL 2 Loading batteries to the remote control Remove the battery compartment cover. Make sure that the batteries have been inserted in the correct polarities matching to the symbols +, - marked in the battery compartment. Close the battery compartment cover.
Clean the disc surface with a soft, dry cleaning cloth. Wipe the disc surface gently , radically , from center toward the outer edge. Direct sunlight Heat or exhaust from a heating device. Extreme humidity Store discs in cabinet vertically , in dry condition.
4 INTRODUCTION About the player Front panel Back panel 5 4 3 2 L/R FWD STOP REV 5 Left channel output jack 2 S-Video output jack 6 1 Right channel output jack 3 Y/Pb/Pr output jack VIDEO output jack 2.
5 INTRODUCTION Remote control Notes The remote control transmits a directiona infrared beam. Be sure to aiml the remote control directly at the infrared sensor during operation. When the sensor is covered or there is a large object between the remote control and the sensor, the sensor cannot receive signals.
SYSTEM CONNECTION Preparations Accessories 1. Remote controller 2. Audio/Video cable 3. User's manual (check whether be fully equipped after open the box) Battery installation of remote controller Place two AAA batteries into the battery compartment.
GETTING STAR TED Play a disc Normally, when a MP3 disc is loaded, the unit will take longer time to download the initial data. DVD disc that does not match the region code cannot be executed by this player. Return to the disc main menu, press MENU button on the remote.
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
9 FUNCTION BUTTONS Play / Pause / Stop Press PLAY button To play the Disc Then Press PAUSE button to pause. Press to resume normal playback. Press STOP button to stop in two modes: a) Press Once b) Press Twice 1 2 3 STOP memorizes the interrupt position.
The unit muted in SLOW mode The unit mode 10 FUNCTION BUTTONS Forward / Backward Press to skip forward (chapters) Press to skip backward (chapters) 1 2 Skip Forward / Backward Slow Forward Player will not advance or reverse during "WARNING" section of any disc.
11 FUNCTION BUTTONS Disc menu is a DVD disc feature, allowing users to select functions on screen. Disc title is the beginning track of a DVD disc. Some DVD discs refuse the "TITLE” function. Disc MENU Press MENU button return to the DVD disc Menu.
12 FUNCTION BUTTONS Multi-Angle If a DVD disc contains Multi-Angle feature, viewing angles may be selected: 1 During in playback, repeat pressing ANGLE button to select the desired viewing angle Status will be displayed on screen.. A DVD disc may contain up to 9 selectable viewing angles.
13 FUNCTION BUTTONS If a DVD disc contains the Multi-Subtitle feature, subtitle may be selected: 1 Multi-Subtitle A DVD disc may contain up to 32 subtitle selections. NOTE During in playback, repeat pressing SUBTITLE button to select the desired subtitle.
FUNCTION BUTTONS 14 1 V-Mode First,You should press[STOP] Key 1 2 STOP 2 Press[V-MODE]key Video mode switch again. In the condition of NORMAL mode.press [V-MODE] key may select S-video,YUV,RGB,YPbPr,VGA output.
... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...
Repeat functionality depends on different disc's production format, some DVD discs do not allow repeat function. 1 Repeat NOTE Press REPEAT button multiple times to reach desired repeat mode (see below). .. .. .. .. . .. .. .. .. . .. .. .. .. . .
17 FUNCTION BUTTONS ZOOM NOTE 2 1 2 The picture quality is degraded as the picture is increased. Press the ZOOM Button to enlarge viewable picture. Press the button repeatedly to change the zoom scale: Press the CURSOR buttons to adjust the zooming position.
18 FUNCTION BUTTONS Shuffle ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ......... ...
PROG 19 FUNCTION BUTTONS P rogram to play a DVD, CD and MP3 disc in a desired sequence automatically . Program setting NOTE Some DVD discs do not allow programming. Single track disc cannot be programmed. DVD program menu 1 Load a DVD disc. Press the PROG button, the DVD program menu will appear .
20 FUNCTION BUTTONS Return 1 Mark 1 STORING MARKS MEMORY 1. Press the “MARK” button on remote control during the disc is played and the menu of mark setting with three bookmarks will appear on the screen.
OSD - DVD mode ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... .
22 Disc T rack current track / total tracks Playback time Playing track file information (Information provided by the disc) MP3 mode Playing track highlight Selection highlight (Press ENTER button to play this track) Auto playback The player will load the MP3 disc and auto start to playback from track one till the last track of the root directory.
4:3 Letter Box Allow you to see movies in their original aspect ratio. Entire frame of the movie will be display on screen, but it will occupy a smaller portion of the screen. 4:3 Pan Scan The signal will fill the screen with the centre of the picture.
16:9 Wide Screen When you connect to a wide screen TV , this setting will allow the original aspect ratio will be display full screen. N O TE Depending on the DVD disc format, e.g. 2.35:1, the wide screen setting may still having black margins above and below the picture.
TROUBLE SHOOTING 25 Should your DVD player develop a problem, please check below before requesting service: Symptom Check and Action No Power Check if the power cord has been properly connected to the power outlet. Check if the main power has been switched on.
26 TROUBLE SHOOTING Symptom Check and Action Cannot SKIP or SEARCH Some discs are programmed that do not allow users to SKIP or SEARCH at some sections, especially at the beginning WARNING section.
27 SPECIFICA TIONS Type of Disc Video Format Audio Format Signal Output Frequency Response S/N radio THD Output Terminals Power input Dimensions DVD CD-DA CD-MP3 Kodak Picture CD CD-R / CD-RW MPEG 2 MPEG 1, LAYER 1, LA YER 2 , LAYER 3 Color System: Audio System: Video Output: Audio Output (Stereo): 2 Vpp CD: DVD: > 92 dB < 0.
An important point after buying a device Curtis DVD DVD1072 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Curtis DVD DVD1072 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Curtis DVD DVD1072 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Curtis DVD DVD1072 you will learn all the available features of the product, as well as information on its operation. The information that you get Curtis DVD DVD1072 will certainly help you make a decision on the purchase.
If you already are a holder of Curtis DVD DVD1072, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Curtis DVD DVD1072.
However, one of the most important roles played by the user manual is to help in solving problems with Curtis DVD DVD1072. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Curtis DVD DVD1072 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
