Instruction/ maintenance manual of the product CTL 5fln Ctl
Go to page of 10
S/N:9978623807A COLOR MONITOR Model No : CTL 5fln CTL USER S GUIDE.
1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards.
The power cord is used as a main disconnect device. Disconnect the power cord before servicing. The outlet must be installed near the monitor and must be easily accessible. As an E NERGY S TAR Partner, Computer Technology Link, Inc., has determined that this product meets the Energy Star guidelines for energy efficiency.
Introduction 1 Product Features 2 Setup 3 Installing the Tilt/Swivel Stand 3 Connecting the D-Sub Signal Cable 4 Connecting to Your Macintosh Computer 4 Connecting the Power Cord 4 Power Management Sy.
2 PRODUCT FEA TURES • The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color . • The monitor supports a safe working environment in strict compliance with the MPR standard for low emissions(TCO 1995 is optional).
4 CONNECTING THE D-SUB SIGNAL CABLE 1. T urn off the computer and monitor . 2. Connect the 15 pin D-sub connector to the output port of the video card in your computer . 3. T ighten the screws of connector . CONNECTING TO YOUR MACINTOSH COMPUTER 1. T urn off the computer and monitor .
6 OPERA TION & ADJUSTMENT : Launch OSD(On-Screen Display) Menus : Select the next function : Select the previous function : Increase the value of any selected function : Decrease the value of any .
8 2. OSD (On-Scr een Display) Menu 2 - + 50% HORIZONTAL POSITION - + 50% HORIZONTAL SIZE - + 50% VERTICAL POSITION - + 50% VERTICAL SIZE - + 50% MOIRE - + 50% TILT Adjust the position of the display horizontally (left or right). Adjust the display width (horizontal size).
VGA 720 400 31.5 70 Non-interlaced VGA 640 480 31.5 60 Non-interlaced VESA 46K 800 600 46.9 75 Non-interlaced VESA 800 600@85Hz 800 600 53.7 85 Non-interlaced VESA 60K 1024 768 60.0 75 Non-interlaced VESA 1024 768@85Hz 1024 768 68.7 85 Non-interlaced Mode H.
12 TROUBLESHOOTING Check Check if POWER SWITCH and COMPUTER POWER SWITCH are in the on position. Check if the signal cable is correctly connected to the video card. Check if the pins of D-sub connector are not bent. Check if the computer is in the power saving mode.
An important point after buying a device Ctl CTL 5fln (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ctl CTL 5fln yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ctl CTL 5fln - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ctl CTL 5fln you will learn all the available features of the product, as well as information on its operation. The information that you get Ctl CTL 5fln will certainly help you make a decision on the purchase.
If you already are a holder of Ctl CTL 5fln, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ctl CTL 5fln.
However, one of the most important roles played by the user manual is to help in solving problems with Ctl CTL 5fln. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ctl CTL 5fln along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
