Instruction/ maintenance manual of the product 7cln Ctl
Go to page of 10
S/N:9978626503 Model No : 7cln COLOR MONIT OR USER’S GUIDE CTL.
1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards.
The power cord is used as a main disconnect device. Disconnect the power cord before servicing. The outlet must be installed near the monitor and must be easily accessible. As an E NERGY S TAR Partner, Computer Technology Link, Inc. has determined that this product meets the Energy Star guidelines for energy efficiency.
Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ...................................................................
PRODUCT FEA TURES • The convenient and user-friendly on-screen display allows for easy and accurate adjustments of horizontal and vertical screen size and position, geometry and screen color . • The monitor supports a safe working environment in strict compliance with the MPR II standard for low emissions.
5 4 POWER MANAGEMENT SYSTEM If you use the monitor with a computer that complies with the power-saving program, you can set the monitor to go blank when the system has remained unused for a period of time.
DEUTSCH ENGL SH ESP AÑOL FRAN C A S T AL ANO 7 6 Key Pr ocess Start MENU • When you choose the icon on the OSD window , you can exit the OSD screen. OPERA TION & ADJUSTMENT Contr ol Panel • Move cursor to the right window on the OSD window . • Increase the value of any selected function.
9 8 Adjust the vertical picture moire cancellation. V. MOIRE Adjust the focus image. FOCUS ZOOM Adjust the display width & height at the same time. Adjust the left and right margins for more convex or more concave margins. Adjust the trapezoid of the screen by moving the lines inward or outward.
11 10 SPECIFICA TIONS Self Diagnosis When the monitor doesn’t display , if you press any key , Self Diagnosis screen is displayed. Self Diagnosis function checks if the status of the monitor is No Signal or Out of range. No Signal screen is displayed when the D-Sub signal connector is not connected or the status of the monitor is on DPMS mode.
13 12 DESCRIPTION FOR D-SUB CONNECTOR Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Red Green Blue GND GND GND-Red GND-Green GND-Blue +5Vdc GND-H.Sync GND-V.Sync Bi-directional Data(SDA) Horizontal Sync Vertical Sync(VCLK) Data Clock(SCL) 1 6 15 10 * GND=Ground TROUBLESHOOTING Check if power switch and computer power switch are in the on position.
An important point after buying a device Ctl 7cln (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ctl 7cln yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ctl 7cln - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ctl 7cln you will learn all the available features of the product, as well as information on its operation. The information that you get Ctl 7cln will certainly help you make a decision on the purchase.
If you already are a holder of Ctl 7cln, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ctl 7cln.
However, one of the most important roles played by the user manual is to help in solving problems with Ctl 7cln. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ctl 7cln along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
