Instruction/ maintenance manual of the product N9360A Agilent Technologies
Go to page of 44
Agilent T echnologies Agilent N9360A Multi UE T ester Quick Reference Guide.
Notices © Agilent T echnologies, Inc. 2008 No part of this manual may be reproduced in any form or by any means (including electronic storage and retrieval or transla- tion into a foreign language) without prior agreement and written consent from Agilent T echnologies, In c.
N9360A Multi UE Tester Quick Reference Guide iii Preface Thank-you for purchasing the Agilent N9360A mobile communciations tester . • Before using the tester , the user is advised to read this manual carefully to ensure correct usage an d also to fully utilize the tester capability .
iv N9360A Multi UE Tester Quick Reference Guide THIS P AGE IS INTENTIONALL Y LEF T BLANK..
N9360A Multi UE Tester Quick Reference Guide v Contents Notation I-iii Notices I-iii T rademarks I-iii 1 Legal Information Legal Information 1-2 Wa r r a n t y 1-2 T echnology Licenses 1-2 Restricted .
vi N9360A Multi UE Tester Quick Reference Guide RF Channels 4-7 MS Power Control / Power Class 4-7 RX Level 4-9 RX Quality 4-10 5W - C D M A S y s t e m For Go/No-Go T esting 5-2 For Pinpointing Failu.
1-1 Agilent T echnologies 1 Legal Information Wa r r a n t y 1-2 T echnology Licenses 1-2 Restricted Rights Legend 1-2 Service And Support 1-3 Agilent On The W eb 1-3 Agilent By Phone 1-3.
1-2 N9360A Multi UE Tester Quick Reference Guide 1 Legal Information Legal Information W arranty The material cont ained in th is document is pro vided “as is,” and is subject to being changed, wit h out notice, in future editions.
Legal Information 1 N9360A Multi UE Tester Quick Reference Guide 1-3 Service And Support Any adjustment, maintenance, or repa ir of thi s product must be performed by qualified perso nnel. Contact your customer engineer t hrough y o ur local A gilent Technologies Service Center .
1-4 N9360A Multi UE Tester Quick Reference Guide 1 Legal Information THIS P AGE IS INTENTIONALL Y LEF T BLANK.
2-1 Agilent T echnologies 2 Caution and Safety Requirements Safety Summary 2-2 Safety Notices 2-2 W arning Label 2-2 General 2-3 When Operating The T e ster 2-3.
2-2 N9360A Multi UE Tester Quick Reference Guide 2 Caution and Safety Requirements Safety Information Safety Summary The fo llowing general saf ety pr ecautions must be observed during all phases of operation of t his instr ument.
Caution and Safety Requirements 2 N9360A Multi UE Tester Quick Reference Guide 2-3 General When Operating The T ester W ARNING The protection provided by the N9 360A tester may be impaired if the tester is used in a manner not specified by Agilent or the instructions on the display are not followed.
2-4 N9360A Multi UE Tester Quick Reference Guide 2 Caution and Safety Requirements THIS P AGE IS INTENTIONALL Y LEF T BLANK..
3-1 Agilent T echnologies 3 General Operation Using a USB memory device 3-2 Using the Knob on the Front Panel 3-2 Preparation for T ests 3-3 GSM/W -CDMA/cdma2000 Mobile Phone Repair Process 3-4.
3-2 N9360A Multi UE Tester Quick Reference Guide 3 General Operation Using a USB memory device A USB memor y device can be used to sav e and recall t he test pr oce dure s, to upd ate the firmwa re o f the T ester , and to sa ve screen images as image f iles.
General Operation 3 N9360A Multi UE Tester Quick Reference Guide 3-3 Preparation for T ests Figure 3-1 Ty p i c a l Te s t S e t u p Connecting RF Signal: 1 Co nnec t the m obil e pho ne to the T es ter usin g the user -supplied RF Cable, opti onal Antenna Coupler , or optional Shield Case.
3-4 N9360A Multi UE Tester Quick Reference Guide 3 General Operation GSM/W -CDMA/cdma2000 Mobile Phone Repair Process Figure 3-2 Mobile Phone Repair Process A typical GSM, W-CDMA and cd ma2000 mobile phone repair process at se rvice centers is basically divid ed into two processes, Incoming Ins pection and Mechanical & Module Repair .
4-1 Agilent T echnologies 4 GSM System For Go/No-Go T esting 4-2 For Pinpointing Failures 4-3 For T roubleshooting 4-5 RF Channels 4-7 MS Power Control / Power Class 4-7 RX Level 4-9 RX Quality 4-10.
4-2 N9360A Multi UE Tester Quick Reference Guide 4 GSM System For Go/No-Go T esting Figure 4-1 [Automatic T est: Stand-by] Screen 1 Press the Automatic T est softke y on t he [Initial] screen in GSM syst em. 2 Mo ve the cursor t o the “Procedure” f ield, and select a pre-defined t est procedure.
GSM System 4 N9360A Multi UE Tester Quick Reference Guide 4-3 For Pinpointing Failures Figure 4-2 [Automatic T est: Stand-by] Screen 1 P er form the st eps described in “F or Go/No-Go T esting.” 2 Press the Screen>> sof tkey to set screen mode to Detail or Va l u e .
4-4 N9360A Multi UE Tester Quick Reference Guide 4 GSM System 3 Ro t ate th e kn ob to p lace the cu rso r in o ne o f the P ass /Fai l cells on the det ail screen or t est result cells on the value screen. Then, press the knob . 4 One of the follo wing measurement result screens is displa yed according to y our selection in step 3.
GSM System 4 N9360A Multi UE Tester Quick Reference Guide 4-5 For T roubleshooting Figure 4-4 [ Manual T est (GSM): Stand-by] Screen 1 Press the Manual T est sof tkey on t he [Initial ] screen. 2 Mo v e the cu rsor to the “ Pro ced ure” f iel d an d sel ect a pre-defined t est procedure.
4-6 N9360A Multi UE Tester Quick Reference Guide 4 GSM System Figure 4-5 V arious [Manual T est (GSM) : Stand-by] Screens 7 While “Connection” is hi ghlighted in t he test f low , press the Tr i g g e r softkey t o st art sing le measurement or the Tr i g g e r Sing /Cont softke y t o st ar t continuous measurement.
GSM System 4 N9360A Multi UE Tester Quick Reference Guide 4-7 Press the Tr i g g e r S i n g / Cont sof tk ey again t o ter minate t he continuous measurement. 9 In the graphical display , the marker function is available to read the dat a points by rotating the knob.
4-8 N9360A Multi UE Tester Quick Reference Guide 4 GSM System 72 9 22 6 32 4 82 7 32 4 42 2 92 5 42 2 52 0 10 23 5 20 6 18 11 21 6 18 7 16 12 19 7 16 8 14 13 17 8 14 9 12 14 15 9 12 10 10 15 13 10 10 .
GSM System 4 N9360A Multi UE Tester Quick Reference Guide 4-9 RX Level T able 4-5 RX levels # RX Level # RX Level # RX Level 0 ≤− 110 dBm 22 –89 to –88 dBm 44 –67 to – 66 dBm 1 –110 to .
4-10 N9360A Multi UE Tester Quick Reference Guide 4 GSM System RX Quality T able 4-6 RX Quality # RX Quality # RX Quality 0 <0.2 % 4 1.6 to 3.2 % 1 0.
5-1 Agilent T echnologies 5 W- C D M A S y s t e m For Go/No-Go T esting 5-2 For Pinpointing Failures 5-3 For T roubleshooting 5-4 UARFCN 5-5 Mobile Phone Maximum Output Power 5-5.
5-2 N9360A Multi UE Tester Quick Reference Guide 5 W-CDMA System For Go/No-Go T esting Figure 5-1 [Automatic T est: Stand-by] Screen 1 Press the Automati c T est sof tke y on t he [Initial] screen for W-C D MA s y st em . 2 Mo ve the cursor t o the “Procedure” f ield, and select a pre-defined t est procedure.
W-CDMA System 5 N9360A Multi UE Tester Quick Reference Guide 5-3 For Pinpointing Failures Figure 5-2 [Automatic T est: Stand-by] Screen 1 P er form the st eps described in “F or Go/No-Go T esting.” 2 Press the Screen>> sof tkey to set screen mode to V alue.
5-4 N9360A Multi UE Tester Quick Reference Guide 5 W-CDMA System For T roubleshooting Figure 5-3 [Manual T est: Stand-by] Screen 1 Press the Manual T est sof tkey on the [Initial] sc reen. 2 Mo v e the cu rsor to the “ Pro ced ure” f iel d an d sel ect a pre-defined t est procedure.
W-CDMA System 5 N9360A Multi UE Tester Quick Reference Guide 5-5 UARFCN Mobile Phone Maximum Output Power T able 5-2 W -CDMA Frequency Band Band Uplink ; mobile phone transmit Downlink ; mobile phone .
5-6 N9360A Multi UE Tester Quick Reference Guide 5 W-CDMA System THIS P AGE IS INTENTIONALL Y LEF T BLANK..
6-1 Agilent T echnologies 6 cdma2000 System When "CDMA Mode" is set to MC-1x mode 6- 2 When "CDMA Mode" is set to 1xEV -DO mode 6-6.
6-2 N9360A Multi UE Tester Quick Reference Guide 6 cdma2000 System When "CDMA Mode" is set to MC-1x mode For Go/No-Go T esting Figure 6-1 [Auto T est (MC-1x): Stand-by] Screen 1 Press the Au.
cdma2000 System 6 N9360A Multi UE Tester Quick Reference Guide 6-3 T a ble 6-1 cdma2000 Automatic T est Sequence Step Action Needed Location Update W ait until the Location Update is complete. MS Call (T alk) Dial an arbitrary number and press the Off Hook key on the mobile phone.
6-4 N9360A Multi UE Tester Quick Reference Guide 6 cdma2000 System For Pinpointing Failures Figure 6-2 [Auto T est (MC-1x): Stand-by] Screen 1 P er form the steps described in "For Go/N o-Go T esting.” 2 Press the Screen>> sof tke y t o set screen mode to V alue.
cdma2000 System 6 N9360A Multi UE Tester Quick Reference Guide 6-5 For T roubleshooting Figure 6-3 [Manual T est (MC-1x): Stand-by] Screen 1 Press the Manual T est sof tkey on t he [Initial ] screen. 2 Mo v e the c urso r to the " Pro cedu re" fi eld an d sel ect a pre-defined t est procedure.
6-6 N9360A Multi UE Tester Quick Reference Guide 6 cdma2000 System When "CDMA Mode" is set to 1xEV -DO mode For Go/No-Go T esting Figure 6-4 [Auto T est (1xEV -DO): Stand-by] Screen 1 Press .
cdma2000 System 6 N9360A Multi UE Tester Quick Reference Guide 6-7 For Pinpointing Failures Figure 6-5 [Auto T est (1xEV -DO): Stand-by] Screen 1 P er form the steps described in "For Go/N o-Go" T esting". 2 Press the Screen>> sof tkey to set screen mode to V alue.
6-8 N9360A Multi UE Tester Quick Reference Guide 6 cdma2000 System For T roubleshooting Figure 6-6 [Manual T est (1xEV -DO): Stand-by] Screen 1 Press the Manual T est sof tkey on t he [Initial ] screen. 2 Mo v e the c urso r to the " Pro cedu re" fi eld an d sel ect a pre-defined t est procedure.
cdma2000 System 6 N9360A Multi UE Tester Quick Reference Guide 6-9 RF Channel † The BAND15: A WS is available only wh en the Option C03 is installed in the T ester .
6-10 N9360A Multi UE Tester Quick Reference Guide 6 cdma2000 System THIS P AGE IS INTENTIONALL Y LEF T BLANK..
An important point after buying a device Agilent Technologies N9360A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Agilent Technologies N9360A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Agilent Technologies N9360A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Agilent Technologies N9360A you will learn all the available features of the product, as well as information on its operation. The information that you get Agilent Technologies N9360A will certainly help you make a decision on the purchase.
If you already are a holder of Agilent Technologies N9360A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Agilent Technologies N9360A.
However, one of the most important roles played by the user manual is to help in solving problems with Agilent Technologies N9360A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Agilent Technologies N9360A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
