Instruction/ maintenance manual of the product IPAC Crestron
Go to page of 12
IPAC Introduction This docum ent contai ns i nst r u ct ions fo r i nst al l ing the IP AC seri es of wal l - m ounted, Integrated Professional Automatio n Computers.
Integrated Professional Automation Computer Crestron IPAC Installation The following tools are required for installation of an IPAC: • Philips screwdriver • Flat screwdriver; 3/32” (2.4 mm) blade size Install the Mounting Plate Use the four i ncluded 06-32 x ¾” screws to install the m ounting plate on the electrical box.
Crestron IPAC Integrated Professional Automation Computer WARNING: Prior to connecting the IPAC, turn off power at the power supply. Failure to do so may result in serious p ersonal inju ry or dam age to the device. R estore power after all con nections have been made.
Integrated Professional Automation Computer Crestron IPAC LAN Connector The following illustration shows the pin assignments of the RJ-45 LAN connector.
Crestron IPAC Integrated Professional Automation Computer RELAYS Connector Refer to the illustration below when wiring the RELAYS connector. WARNING: Incorrect wiring m ay damage the IPAC. INPUTS Connector The illustration below is an example of what cou ld be connected to the INPUTS connector.
Integrated Professional Automation Computer Crestron IPAC Attach the IPAC to the Mounting Plate Use the two i ncluded 04-40 x ¼” screws to attach the IPAC to the mounting plate as shown in the follo wing diagram. CAUTION: Excess wire that i s pinched be tween th e IPAC and the ele ctrical box could short out.
Crestron IPAC Integrated Professional Automation Computer Affix Labels to the Label Holder As shown in the following diagram, attach labels to th e lab el holder.
Integrated Professional Automation Computer Crestron IPAC Specifications IPAC Specifications SPECIFICATION DETAILS Processor CPU 32-bit Freescale ColdFire ® Microprocessor Memory SDRAM NVRAM Flash Po.
Integrated Professional Automation Computer Crestron IPAC Industry Compliance This unit has been manufactured to comply with UL’s Standards for Safety in Canada and the United States. Form al approval is pen ding. As of the date of manufacture, the IPAC has been tested and found to comply with specifications for CE marking.
Integrated Professional Automation Computer Crestron IPAC Problem Solving Troubleshooting The following table provides corrective action for possible trouble situatio ns. If further assistance is required, please contact a Cr estron customer s ervice representative.
Crestron IPAC Integrated Professional Automation Computer Appendix The following labels are included with the IPAC: Installation Guide – DOC. 6696A 3-Phase Power Loss Sensor: IP AC • 11.
Integrated Professional Automation Computer Crestron IPAC Return and Warranty Policies Merchandise Returns / Repair Service 1. No mer ch and ise may b e r etur ned for credit, exchange or service without prior authorization from CRESTRON. To obtain w arranty service for CRESTRON pr oducts, conta ct an authorize d CRESTRON dealer.
An important point after buying a device Crestron IPAC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crestron IPAC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crestron IPAC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crestron IPAC you will learn all the available features of the product, as well as information on its operation. The information that you get Crestron IPAC will certainly help you make a decision on the purchase.
If you already are a holder of Crestron IPAC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crestron IPAC.
However, one of the most important roles played by the user manual is to help in solving problems with Crestron IPAC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crestron IPAC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
