Instruction/ maintenance manual of the product RFX30 Crate Amplifiers
Go to page of 8
Guitar Amplifier with Digital Ef fects User ’ s Guide.
T ABLE OF CONTENTS: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 The T op Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4,5 The Bottom Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 The DSP Section .
3 Congratulations and thank you for choosing the Crate RFX30 RetroFex Guitar Amplifier . This rugged amplifier features a Clean channel with a three-band EQ and level control, and a Solo channel with our patented FlexW ave technology , Gain, Level and Shape control.
4 The T op Panel: 1 2 3 5 4 7 8 9 10 11 12 13 14 6 1: INPUT : Use this 1/4” jack to connect your guitar to the amplifier by means of a shield- ed instrument cable. SOLO CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive.
5 14: POWER: Use this switch to turn the amplifier on (top of the switch depressed) and of f (bottom of the switch depressed). The switch illuminates when the amplifier is turned on. 15: TUNER: The electronic tuner is active whenever the amplifier is turned on, providing constant, “real-time” tuning.
6 The DSP Section: Use the DSP control to select one of the 16 built-in digital effects. Use the DSP Level control to adjust the amount of selected effect. In the fully counter clockwise position there will be no effect applied. As you rotate the control closckwise the amount of effect increases.
7 System Block Diagram: INPUT FOOTSWITCH JACK SOLO/ CLEAN LOW LEVEL MID HIGH LEVEL BUFFER CLEAN POWER AMP EXTENSIO N SPEAKER SPEAKER EXTENSIO N SPEAKER TUNER A BC D EF G GAIN SHAPE LEVEL SOLO DSP MODE.
RFX30 TECHNICAL SPECIFICA TIONS: Output Power Rating >30W RMS @ 5% THD, 4 Ω , 120 V AC Gain Solo Ch 98dB +/-6dB @ 1kHz Clean Ch 42dB +/-6dB @ 1kHz Maximum Input Signal Accepted 6 volts peak-to-peak min.
An important point after buying a device Crate Amplifiers RFX30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate Amplifiers RFX30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate Amplifiers RFX30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate Amplifiers RFX30 you will learn all the available features of the product, as well as information on its operation. The information that you get Crate Amplifiers RFX30 will certainly help you make a decision on the purchase.
If you already are a holder of Crate Amplifiers RFX30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate Amplifiers RFX30.
However, one of the most important roles played by the user manual is to help in solving problems with Crate Amplifiers RFX30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate Amplifiers RFX30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
