Instruction/ maintenance manual of the product MX65R Crate Amplifiers
Go to page of 8
.
Congratulations! Y ou are now the proud owner of the Crate MX65R amplifier . This rugged amplifier delivers serious clean and distorted sounds through its premium 12” Crate Custom speaker . Channel selection, Crate’s exclusive Shape circuit, and reverb on/of f are controllable by using the supplied footswitch.
Important Safeguards and Precautions: 3 All Crate products are designed for continuous safe operation. Abiding by the following rules can help prevent damage to your amplifier , yourself and others. • The amplifier is equipped with a three-pronged AC power cord.
The Front Panel: 4 1: INPUT : Use this 1/4” jack to connect your guitar to the amplifier by means of a shielded instrument cable. OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2: GAIN 1: Use this control to adjust the amount of light distortion for the Overdrive channel.
5 17: ON LED: This LED will illuminate when power is applied to the amplifier . 18: POWER: Use this switch to turn the amplifier on and off. 19: AC LINE CORD: (Rear panel, not shown:) This grounded po.
Suggested Settings: 6 Clean: Blues: Rhythm: Lead:.
System Block Diagram: 7 INPUT CHANNEL SELECT FLEX WAVE STAGE LOW LEVEL MID HIGH LOW SHAPE HIGH LEVEL REVERB LEVEL GAIN GAIN SELECT SHAPE ACTIVE BUFFER MIX AMP INSERT CLEAN CHANNEL OVERDRIVE CHANNEL DAMPING CIRCUIT POWER AMP EXT.
MX65R TECHNICAL SPECIFICA TIONS: Output Power Rating 65 watts RMS @ 5% THD 8 ohms, 120 V AC Gain, Overdrive Channel Gain 1 = 88dB, Gain 2 = 1 10dB Gain, Clean Channel 58dB T one Control Range.
An important point after buying a device Crate Amplifiers MX65R (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate Amplifiers MX65R yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate Amplifiers MX65R - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate Amplifiers MX65R you will learn all the available features of the product, as well as information on its operation. The information that you get Crate Amplifiers MX65R will certainly help you make a decision on the purchase.
If you already are a holder of Crate Amplifiers MX65R, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate Amplifiers MX65R.
However, one of the most important roles played by the user manual is to help in solving problems with Crate Amplifiers MX65R. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate Amplifiers MX65R along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
