Instruction/ maintenance manual of the product MX20RC Crate Amplifiers
Go to page of 8
.
Congratulations! Y ou are now the proud owner of the compact but powerful Crate MX20RC amplifier . T wo versatile channels – one crystal clear and the other with our patented “Flex-Wave” distortion – combined with reverb and a three-band EQ and a switchable Chorus offer you more flexibility and performance than any amp in its class.
Important Safeguards and Precautions: 3 All Crate products are designed for continuous safe operation. Abiding by the following rules can help prevent damage to your amplifier, yourself and others. • The amplifier is equipped with a three-pronged AC power cord.
4 The Front Panel: 1: INPUT : Use this 1/4” jack to connect your guitar to the amplifier by means of a shielded instrument cable. OVERDRIVE CHANNEL: A high gain channel giving you sounds from a slight edge to serious overdrive. 2: GAIN: Use this control to adjust the amount of distortion for the Overdrive channel.
5 9: REVERB LEVEL: Use this control to adjust the amount of reverberation: in its full counter clockwise position the signal will be “dry” (without any reverb).
Suggested Settings: 6 Clean: Blues: Rhythm: Lead:.
System Block Diagram: 7.
MX20RC TECHNICAL SPECIFICA TIONS: Output Power Rating >20 watts RMS @ 5% THD 4 ohms, 120 VAC Gain, Overdrive Channel 86 +/-6dB @ 1kHz Gain, Clean Channel 46 +/-6dB @ 1kHz T one Control Range, Low 2.
An important point after buying a device Crate Amplifiers MX20RC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Crate Amplifiers MX20RC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Crate Amplifiers MX20RC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Crate Amplifiers MX20RC you will learn all the available features of the product, as well as information on its operation. The information that you get Crate Amplifiers MX20RC will certainly help you make a decision on the purchase.
If you already are a holder of Crate Amplifiers MX20RC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Crate Amplifiers MX20RC.
However, one of the most important roles played by the user manual is to help in solving problems with Crate Amplifiers MX20RC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Crate Amplifiers MX20RC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
