Instruction/ maintenance manual of the product C944.511573 Craftsman
Go to page of 10
Instruction Manual J €:RAFTSMA#°J LAWN EDGER ATTACHMENT Model No. C944.511573 • Safety • Assembly • Operation • Maintenance • Parts List WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Maintenance 9 Identification of Symbols 2 Service & Adjustments 10 Safety Rules 2 Storage 10 Assembly 6 Parts List Center Section Operation 7 Parts and Ordering Back Cover LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN ® LAWN EDGER ATTACHMENT For two (2) years from tile date of purchase, Sears Canada, Inc.
stopped and spark plug wire is discon- nected (or powerhead is disconnected from power source) when removing jammed material from the cutting blade. Do not grab or hold attachment by the cutting blade.
extension cord to the unit. An under- sized extension cord will cause a drop in line voltage resulting in loss of power and overheating. Ifin doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord. • Do not use multiple cords.
t Safety Boots Glasses Blades move momentarily after the trigger is & Allow blades to stop _IL before removing them u WARNING: Blades can throw objects violently. • You can be blinded or injured. • Wear safety glasses and boots. _, WARNING: Hazard zone for thrown objects • Blades can throw objects violently.
STANDARDS: This edger attachment is Listed by Underwriter's Laboratories, Inc., in accordance with U L Standard 1602, "Gasoline- Engine- Powered, Rigid- Cutting-Member Edgers and Edger Trimmers," only when used with the following models: 25cc Powerhead (with trimmer attachment) .
KNOW YOUR EDGER ATTACHMENT READ THiS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR EDGER ATTACHMENT. Compare the illustrations with your attachment to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference.
INSTALLING ATTACHMENT 1. Remove the shaft cap from the at- tachment (if present) and discard. 2. Position locking/release button of attachment into guide recess of up- per shaft coupler. Coupler Primary Hole Guide Recess Upper Locking/ Attachment Shaft Release Button 3.
Depth Knob 1, Loosen the depth adjustment knob. 2. Slide the wheel to the desired posi- tion. • Raising the wheel will increase the cutting depth, • Lowering the wheel will decrease the cutting depth. 3. Tighten the depth adjustment knob securely.
BLADE REPLACEMENT _,WARNING: The blade will con- tinue to spin after the engine stops or after the throttle trigger has been re- leased. To avoid serious injury, make sure the blade has stopped coasting and disconnect the spark plug (or dis- connect powerhead from power source) before performing work on the blade.
An important point after buying a device Craftsman C944.511573 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman C944.511573 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman C944.511573 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman C944.511573 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman C944.511573 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman C944.511573, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman C944.511573.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman C944.511573. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman C944.511573 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
