Instruction/ maintenance manual of the product 51158 Craftsman
Go to page of 9
Instruction Manual J €:RAFTSMA#°J CULTIVATOR A'I-FACHMENT Model No. C944.511580 • Safety • Assembly • Operation • Maintenance • Parts List WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
Warranty Statement 2 Service & Adjustments 9 Safety Rules 2 Storage 9 Assembly 5 Operation 6 Parts List Center Section Maintenance 8 Parts and Ordering Back Cover LIMITED TWO (2) YEAR WARRANTY ON CRAFTSMAN ® CULTIVATOR ATTACHMENT For two (2) years from the date of purchase, Sears Canada, Inc.
/ Hazard Zone Keep children, bystanders, and animals 30 feet (10 meters) away. Stop unit im- mediately if approached. • Dress properly. Always wear safety glasses or similar eye protection when operating, or performing main- tenance on your unit (safety glasses are available).
carry current from the power source the full length of the extension cord to the unit. An undersized extension cord will cause a drop in line voltage resulting in loss of power and over- heating. If in doubt, use the next heavier gauge. The lower the gauge number, the heavier the cord.
• Hold the unit firmly with both hands. • Keep firm footing and balance. Do not overreach or stand on unstable surfaces. • Look behind and use care when backing up. • Keep all parts of your body away from the tines and muffler. • Do not force the unit.
KNOW YOUR CULTIVATOR ATTACHMENT READ THIS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CULTIVATOR A'i-FACHMENT Compare the illustrations with your attachment to familiar- ize yourself with the location of the various controls and adjustments.
INSTALLING ATTACHMENT 1. Remove the shaft cap from the at- tachment (if present) and discard. 2= Position locking/release button of attachment into guide recess of up- per shaft coupler.
MAINTENANCE SCHEDULE WARNING: Always stop unit and disconnect spark plug wire (or discon- nect powerhead from power source) before performing maintenance.
TINE REPLACEMENT ,_WARNING: The tines will contin- ue to spin after the engine stops or af- ter the throttle trigger has been re- leased. To avoid serious injury, make sure the tines have stopped coasting and disconnect the spark plug (or dis- connect powerhead from power source) before performing work on the tines.
An important point after buying a device Craftsman 51158 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 51158 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 51158 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 51158 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 51158 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 51158, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 51158.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 51158. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 51158 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
