Instruction/ maintenance manual of the product 2723303 836.27233 Craftsman
Go to page of 12
2723303 Owner's Manual ELECTRIC NAILER Model No. 836.272330 Serial No. NOTE: Model and serial numbers may be found on the name plate located on the tool. You should record both numbers and retain them in a safe place. CAUTION: Before using this Nailer, read this manual and follow all its Safety Rules and Operating instructions.
SECTION PAGE Warranty ................................................... 2 Product Specifications ........................................ 2 Safety Instructions ........................................... 3 Accessories and Attachments ...............
GENERAL SAFETY INSTRUCTIONS 6. DON'T FORCETHETOOL. It will do the job better and safer if used at the rate for which it was designed. Do not attempt to operate this tool until 7. you have read and thoroughly understand all instructions, safety rules, etc.
13. DISCONNECTTOOL when not in use, before servicing and when loading or changing accessories. 14.AVOID UNINTENTIONAL STARTING. Never carry tool with your finger on the switch. 15.STAY ALERT, Watch what you are doing and use common sense. Do not operate tool when you are tired or under the influence of drugs, alcohol, or medication.
SPECIFIC SAFETY INSTRUCTIONS FOR THIS NAILER DO NOT AIM NAILER OR SHOOT NAILS AT A PERSON OR ANIMAL. Released nails can cause severe injuries. 1. USE ONLYTHE NAILS INDICATED in this manual. Use of accessories that are not designed for this tool could result in personal injury and/or damage to the tool.
Figure A g Plug Grounding Prong Properly Grounded 3-Prong Outlet FIGURE (A) Shows a 3-wire electrical plug and outlet that has a grounding conductor. If a properly grounded outlet is not available, an adapter (FIGURE B) can be used to temporarily connect this plug to a 2-contact ungrounded outlet.
Housing cap -- Housing Safety lock pin Trigger switch t g mouth cord Latch Nail magazine HOW TO LOAD YOUR BRAD NAILER (FIGURE 1) 1. Unplug nailer from power source. 2. Use only brad nails recommended; see brad nail chart. 3. Push up the latch (1) toward the magazine and slide out the magazine (2).
TO NAIL (FIGURE 2) Always wear safety goggles or safety glasses with side shields when operating your nailer. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury. 1. Plug nailer into 120 Volt, 60Hz power outlet, 2.
CLEARING A JAMMED NAIL (FIGURE 3) 1. Unplug the cord and remove all brads from the magazine. 2. Remove the two screws and washers (1) located on the tacking mouth cover. 3. Remove the cover (2). CAUTION: Be careful, the safety lock pin and spring may shoot forward.
ELECTRIC BRAD NAILER MODEL NUMBER 836,27233 Order by PART NUMBER, not by key number Key Number Part Number Description 1 DCA0060030 Slot-cover (B) 2 DCAO050080 Slot-cover (A) 3 BMSO040010 Screw 4 DCA0.
13.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day.
An important point after buying a device Craftsman 2723303 836.27233 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Craftsman 2723303 836.27233 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Craftsman 2723303 836.27233 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Craftsman 2723303 836.27233 you will learn all the available features of the product, as well as information on its operation. The information that you get Craftsman 2723303 836.27233 will certainly help you make a decision on the purchase.
If you already are a holder of Craftsman 2723303 836.27233, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Craftsman 2723303 836.27233.
However, one of the most important roles played by the user manual is to help in solving problems with Craftsman 2723303 836.27233. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Craftsman 2723303 836.27233 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
