Instruction/ maintenance manual of the product 910TF Computer Tech Link
Go to page of 8
S/N : 9978626520 Model No : 910TF COLOR MONIT OR USER’S GUIDE CTL.
1. Read all of these instructions. 2. Save these instructions for later use. 3. Unplug this monitor from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4. Do not use attachments not recommended by the monitor manufacturer as they may cause hazards.
Introduction ............................................................................. 1 Product Features ................................................................. 2 Setup ...................................................................
English - 3 CONNECTING THE SIGNAL CABLE AND POWER CORD 1. T urn off the computer and monitor . 2. Connect the 15 pin D-sub connector to the output port of the video card in your computer . 3. T ighten the screws of the connector . 4. Plug the power cord into the AC receptacle located on the back of the monitor .
English - 5 English - 4 DEUTSCH ENGL SH ESP AÑOL FRAN C A S T AL ANO Key Pr ocess Start MENU • When you choose the icon on the OSD window , you can exit the OSD screen. OPERA TION & ADJUSTMENT Contr ol Panel • Move cursor to the right window on the OSD window .
English - 7 Adjust the vertical picture moire cancellation. V. MOIRE Adjust the focus image. FOCUS ZOOM Adjust the display width & height at the same time. Adjust the left and right margins for more convex or more concave margins. Adjust the trapezoid of the screen by moving the lines inward or outward.
English - 9 English - 8 SPECIFICA TIONS F ACTORY PRESET TIMINGS Mode H.Freq (KHz) V.Freq(Hz) Remark VGA 480 640 X 480 31.5 60 Non-interlaced VGA 400 720 X 400 31.3 70 Non-interlaced VESA 46K 800 X 600 46.9 75 Non-interlaced VESA SVGA 85 800 X 600 53.7 85 Non-interlaced VESA 60K 1024 X 768 60.
English - 11 English - 10 DESCRIPTION FOR D-SUB CONNECTOR Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Signal Red Green Blue GND GND GND-Red GND-Green GND-Blue +5Vdc GND-H.
An important point after buying a device Computer Tech Link 910TF (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Computer Tech Link 910TF yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Computer Tech Link 910TF - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Computer Tech Link 910TF you will learn all the available features of the product, as well as information on its operation. The information that you get Computer Tech Link 910TF will certainly help you make a decision on the purchase.
If you already are a holder of Computer Tech Link 910TF, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Computer Tech Link 910TF.
However, one of the most important roles played by the user manual is to help in solving problems with Computer Tech Link 910TF. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Computer Tech Link 910TF along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
