Instruction/ maintenance manual of the product uSign 200 Compaq
Go to page of 18
USER MANUAL uSign™ Signature Capture Module Models uSign 100 & uSign 200 80084501-001-A 04-24-2007.
uSign User Ma nual FCC WARNING STATEMENT This equipment has been tested and found to comply with the limit s for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc e when the equipment is operated in a commercial environment.
uSign User Ma nual LIMITED WARRANTY ID TECH warrants to the origin al purchaser for a period of 12 months from the date of invoice that this product is in good worki ng order and free from defects in m aterial and workmanship under normal use and service.
uSign User Ma nual Table of Contents 1.0 Introduction .................................................................................................6 2.0 Features .....................................................................................
uSign User Ma nual 7.4.6 Get data 0x 00 0x01 .......................................................................15 7.4.7 Calibrate t he devic e ....................................................................... 15 7.4.8 Set offset positio n .
uSign User Ma nual 1.0 Introduction The use of electronically captured signatures has become common for Point of Service (POS) applications. Electronic signature capt ure reduces transaction time, eli.
uSign User Ma nual 3.0 Model Designations uSign 100 IDUA-01x100 * uSign 200 IDUA-01x500 * * The “x” defines the communication interfac e, 2 = RS232 and 6 = USB-CDC.
uSign User Ma nual 5.1 Communication Interfaces RS232 The uSign has a communication cable with a DB25 (100 Model) or DB-9 (200 Model) connector that fits the computer serial (RS232) COM port connection. See the Specifications, Interface Sect ion for COM port settings.
uSign User Ma nual Figure 1 New Hardware Wizard opening window Browse and select the folder where the uSignUsbCD C.inf and companion usbser.sys files are located. Click Next > to continue. Figure 2 Browse for File Copyright © 2006, International Technologie s & Systems Corp.
uSign User Ma nual There is a warning window that the INF file is not registered; Click “Continue Anyway”. Click Finish to complete the INF installation. Figure 3 Installation Warning Message 5.2 USB-CDC Setup The following steps provide a check on the USB-CDC COM port selected by the operating system.
uSign User Ma nual 6.3 Physical housin g uSi gn 200 Overall size 129mm wide (5.1 in) 146mm length (5.75 in) 40mm thick including back plate (1.57 in) Display 3.
uSign User Ma nual 10% to 95% non-condensing Copyright © 2006, International Technologie s & Systems Corp. All rights reserved. Page 12 of 18.
uSign User Ma nual 7.0 uSign commands description (Version: 0.02 Date: 2007-03-19) Note: di gits are given in little-endian format. 7.1 Command protocol: Host to device: STX LenL LenH CommandData Lrc1 Lrc2 ETX STX: 0x02. 1 byte. LenL+LenH: sizeof(C ommandData).
uSign User Ma nual 7.3 One byte commands 7.3.1 Stop Capturing Command string: C0 Response string: C0 7.3.2 Start Capturing use FBP format 1 Command string: C1 Response string: C1 7.3.3 Start Capturing use FBP format 2 Command string: C2 Response string: C2 7.
uSign User Ma nual 7.3.12 Start Capturing use FBP format 0 Command string: D6 Response string: D6 7.4 Multi-byte commands 7.4.1 Initialize device Command string: 28 10 00 00 Response string: DC 05 7.4.2 Get PW120 Version Command string: 2A 10 00 00 Response string: 01 00 7.
uSign User Ma nual 7.4.11 Stop Capturing Command string: 40 30 00 00 Response string: 7.4.12 Start Capturing use FBP format 1 Command string: 41 30 00 00 Response string: 7.
uSign User Ma nual uSign™ 100 SIGNATURE CAPTURE PAD Figure 4 Outline Drawing for uSign 100 Copyright © 2006, International Technologie s & Systems Corp.
uSign User Ma nual uSign™ 200 SIGNATURE CAPTURE PAD Figure 5 Outline Drawing for uSign 200 Copyright © 2006, International Technologie s & Systems Corp.
An important point after buying a device Compaq uSign 200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Compaq uSign 200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Compaq uSign 200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Compaq uSign 200 you will learn all the available features of the product, as well as information on its operation. The information that you get Compaq uSign 200 will certainly help you make a decision on the purchase.
If you already are a holder of Compaq uSign 200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Compaq uSign 200.
However, one of the most important roles played by the user manual is to help in solving problems with Compaq uSign 200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Compaq uSign 200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
