Instruction/ maintenance manual of the product CXCD470 Coby
Go to page of 16
CXCD470 MINI SYSTEM WITH 3-CD CHANGERS AND DOUBLE CASSETTE RECORDER INSTRUCTION MANUAL.
2 The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended to alert the user to the presence of uninsulated "dangerous volt- age" within the product's enclo- sure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
3 LOCA TION OF CONTROLS 23. Fast Rewind 24. Fast Forward 25. Stop/Eject 26. Pause 27. T ape B 28. Function Indicator (AUX) 29. Function Indicator (T uner/Band) 30. Surround On/Off Knob 31. Memory/C-Adj. Knob 32. Bass Boost On/Off Knob 33. V olume Knob 34.
4 45. AUX In 46. Beat Cut Switch 47. Right Speaker Out Let 48. Left Speaker Out Let 49. Left Surround Speaker Out Let 50. Right Surround Speaker Out Let 51. FM Antenna 52. AC V oltage Selector (for dual voltage version only.) 53. AC Main Out Let 54. Left Surround Speaker Box 55.
5 OPERA TIONS 1. Carefully unpack the unit and speakers. Remove all packing material from around the unit. 2. Locate the unit horizontally on a heavy duty stand or firm level surface and away from the speaker system to avoid acoustic feedback. CONNECTIONS 1.
6 CLOCK ADJUSTMENT 1. Set to “T APE” [13] or “AUX” [28] mode. The clock will appear on the LCD display 2. Press the MEMORY/C-ADJ. Button [31] once to adjust the hour . Press the button once more to adjust the minute. 3. Press the /TUNING Button [35] and /TUNING Button [35] to set the time.
7 FM RECEPTION Raise and extend the FM antenna wire [51] then adjust the position for the best reception. ST indicator will appear on the display only if an actual stereo broadcast station is being received. AM RECEPTION Rotate horizontally or relocated the unit for best reception as the built-in ferrite bar antenna is directional.
8 COMP ACT DISC OPERA TION CONCERNING COMP ACT DISC 1. USABLE COMP ACT DISCS Use a compact disc bearing the mark as shown. 2. Notes on handling discs Removing the disc from its storage case and loading it.
9 PLA YING CD 1. Push the POWER Button [5] to turn the unit on. The ST ANDBY INDICA TOR [6] will light up. 2. Press the CD Button [14] to “CD” mode.
10 3. Press the FORW ARD SKIP or BACKW ARD SKIP Button [35] to select the desired track. 4. Press the MEMORY/C-ADJ. Button [31] again to ENTER the selection into the program memory. 5. Repeat steps 2, 3 and 4 to enter desired tracks up to maximum of 20 selections.
11 T APE OPERA TION GENERAL INFORMA TION ON CASSETTE T APES • For playback, use normal (low-noise) tape for best sound. (Metal or chrome tape is not recommended) • For recording, use normal tape only. • Do not use C-120 tapes, tapes with internal reels or poor-quality tapes because they can cause malfunctions.
12 BEA T CUT SWITCH If feedback (whistling noise) occurs when recording from AM broadcasts, set the BEA T CUT selector [46] to I or II whichever gives the best reception. RECORDING FROM CD 1. Press the CD Button [14] to “CD” mode. 2. Place a compact disc in the CD compartment.
13 OPERA TION OF REMOTE CONTROL UNIT LOADING BA TTERIES 1. Remove the battery compartment cover. 2. Insert 2 “AAA” size (not included) batteries as indicated by the polarity marking. (Placing the batteries in the wrong way around cause malfunction.
14 - MODE/REMAIN Button • In radio operation Press the button to change from frequency display to clock display and press again to return. • In CD operation Press the button to change the display from playing time to remaining time, and then to clock display.
15 SPECIFICA TION RADIO SECTION Frequency FM: 87.5 — 108 MHz AM: 522 — 1620 k Hz CASSETTE SECTION T rack System Compact Cassette Stereo Recording System AC Bias T ape Normal Frequency Response 100 — 8000 Hz CD SECTION Sampling Frequency 44.
16 90 DA Y LIMITED W ARRANTY COBY ELECTRONICS CORP. ("COBY") warrants this product to the original purchaser to be free from defects in material or workmanship under normal use of 90 DA YS from the date of original purchase.
An important point after buying a device Coby CXCD470 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Coby CXCD470 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Coby CXCD470 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Coby CXCD470 you will learn all the available features of the product, as well as information on its operation. The information that you get Coby CXCD470 will certainly help you make a decision on the purchase.
If you already are a holder of Coby CXCD470, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Coby CXCD470.
However, one of the most important roles played by the user manual is to help in solving problems with Coby CXCD470. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Coby CXCD470 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
