Instruction/ maintenance manual of the product HDC211 Clover Electronics
Go to page of 8
INSTRUCTION MANUAL TRUE DAY/NIGHT VARI-FOCAL COLOR DOME CAMERA MODEL HDC211 Copyright © 2009 Clover Electronics U.S.A. All Rights Reserved..
• To avoid electrical shock, do not open the case of this product. • Do not stamp fingerprints on the lens. • Operate this product using only the recommended AC Power supply. • Do not overload electrical outlets or extensi on cords; this can result in fire or electr ic shock.
4. If necessary, change the settings to get the best images depending on your application by using the buttons in the camera (refer to the instruction manual for OSD control). 5. Assemble the transparen t dome ③ by turning the locking ring ② clockwise.
.
1. Vari-focal lens ① Easily changeable angle of view: 2.8 to 12mm 2. T ↔ W (Tele ↔ W ide) ③ Turn this adjustment knob ③ clockwise or counter-clockwise to set the focal length. 3. ∞↔ N ② Turn this adjustment knob ② clockwise or counter-clockwi se to set the focus.
If the camera does not function properly, check the following points before contacting the service center. Troubles Remedies No video Check the AC adapter and video cable between the camera and a monitor The image on the screen is dark Check the brightness control on the monitor The image on the screen is dim Check if the lens is stained.
• Image sensor 1/3” SONY Super HAD CCD • Total pixels 811(H) x 508(V) • Effective Pixels 768(H) x 494(V) • Scanning system 2:1 Interlace • O.S.D Available • Backlight Off / HSBLC / BLC selectable • Resolution 550TV Lines(color),600TV Lines(B/W) • S/N (Y signal) 52dB (AGC Off, Weight On) • Min.
1. Original purchaser must fill out a warranty card a nd mail it to the factory with model number, serial number and the date of purchase. 2. We will repair or replace, and re turn to the owner the system under this lim ited warranty.
An important point after buying a device Clover Electronics HDC211 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clover Electronics HDC211 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clover Electronics HDC211 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clover Electronics HDC211 you will learn all the available features of the product, as well as information on its operation. The information that you get Clover Electronics HDC211 will certainly help you make a decision on the purchase.
If you already are a holder of Clover Electronics HDC211, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clover Electronics HDC211.
However, one of the most important roles played by the user manual is to help in solving problems with Clover Electronics HDC211. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clover Electronics HDC211 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
