Instruction/ maintenance manual of the product GP500 Clifford
Go to page of 28
.
.
Main te nance Your GP500 system requires no maintenance except for replacement o f remote control batteries when they reach the end of their useful life. Fo r further information on this, see the Automatic low battery warning and Remot e control battery replacement sections on page 13.
Wel come to the world of high- technology ve hi cle se cu rity and con ven ience C ongratulations on the purchase of your GP500 motorcycle security/convenience system.
Re motely con trol ling your GP500 Each of your two remote controls can command several different functions . TO ARM : Press button I on the remote control. You wil l hear two chirp s and the indicator lights will flas h twice. The LED will flash repeatedly.
TO AC TI VAT E IN STAN T AUTOARMIN G BYPASS : Press button III on the remote control and hold for three seconds. Two indicator light flashe s confirm that GP500 will NOT AutoArm. If you press and hold button III for three seconds onc e more, the system will respond with one indicator light flas h which means that AutoArming has been reactivated.
QUICK REF ER ENCE: RE MOTE CON TROL FUNC TIONS Functio n Press button(s ) Arm or dis ar m I Si lently arm or dis arm II In stant AutoArming By pass (press and hold but ton for three sec ond s while sy.
ACG-2™ (Anti- CodeGrabbing 2™) Clifford’s ACG-2 protects your motorcycle from thieves’ remote control “cloning” devices that are used to record the disarming code transmitted from your remote .
Two- Point In ter nal Im mo bi li sa tion Please be aware that the AutoArming feature has no effect o n Immobilisation. The system automatically immobilizes your vehicle’s starte r and ignition 30 seconds after engine shutdown or when you arm with th e remote control .
AutoArming ™ If this feature is enabled and you forget to remotely arm. After 30 second s pass, the system is automatically armed. In instances where you want to bypass AutoArming, such as when fueling the motorcycle, simply turn th e ignition on and then off again after you have parked.
TO RE MOTELY BY PASS BOTH ZONES : During the first 10 seconds after arming the system remotely, simultaneously press buttons I I and III on the remote control and hold for three seconds.
TO RE MOTEL Y AD JUST THE DUAL- ZONE PIEZO SEN SOR: With the ig ni tion turned OFF. Press but tons I I and III si mul ta ne ously for three sec onds. Th e sys tem will re spond with one chir p . To adjust the warning level of the sensor, yo u must have the ignition turned ON, to adjust th e trigger level of the sensor, turn the ignition OFF.
TO RE MOTELY BY PASS THE WARN ING ZONE: During the first 10 seconds after arming the system remotely, press button III on the remot e control. The system provides f our indicator ligh t flashes when the warning level is bypassed .
False Alarm Pre ven tion & FACT ™ With Clifford’s patented FACT (False Alarm Control and Test) feature , you’ll never experience repeated false alarms. If the siren sounds, DO NO T remotely disarm the system; allow it to run for the full 30-second sire n duration.
How to in ter pret the LED status in di ca tor LED Condition Meaning Of f Sys tem is dis arme d Flashing Steadil y (Ignition off ) Sys tem is arme d Flashing rapidl y (ignition off ) AutoArming Count .
Smart Au toTest ing ™ Each time you remotely arm the system, it tests all triggers and sensors. Fo r example, if the Helmet Theft Prevention System is active, you will receiv e the usual 2 chirps and flashes , then , 5 seconds later , there will be 4 chirp s and 4 flashe s .
LED flashe s Meaning 1 flash Ig ni tion switch was turned on 2 flashe s Ac ti va tion of Digi tal Tilt/Mo tion Sen so r 3 flashe s Ac ti va tion of Dual- Level Piezo Sen so r 4 flashe s Ac ti va tion .
Smart prior in tru sion at tempt aler t If you hear three chirps when you remotely disarm, it means that a trigger or sensor was activated in your absence. When you turn on the ignition (or start the engine), the LED will flash 1-8 times, pause, then repeat the flash cycle 4 more times.
Smart Powe rUp™ 2 If power to the system is ever removed, SmartPowerUp 2 ensures that you r GP500 system automatically restores itself to its previous state when power i s restored.
How to en ter your PIN Code for the first time The PIN code provides two functions: to turn the alarm off in the event tha t you cannot use your remote control and secondly, to access programmin g mode.
2 . Within 5 seconds, press and release the Plain V iew 2 ✱ button 7 times. T o help you count, you will hear a chirp each time you press the ✱ button.
Step- by- step pro gram ming in struc tions 1. Refer to the T able of programmable features on page 32 and find the feature you wish to program. Make note of the number of times to press the ✱ button . 2 . T urn the ignition on, or start the engine (skip this step if the engine i s running).
Ta ble of Pro gram ma ble Fea tures Featur e Factor y Settin g No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completio n confirm - atio n Additiona l Actio n AutoArmin g OF F 2.
Featur e Factory Settin g No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completion confirm - atio n Additiona l Actio n Pro gram othe r Clif ford ACG- 2 Re mote t o Arm/Dis arm.
Feature Factor y Setting No. o f times to press the ✱ butto n Sec - ondar y Actio n Progra m completio n confirm - atio n Additional Actio n Pro gram othe r Clif ford ACG- 2 Re mote to Ad jus t Piez.
2 4 GP50 0.
Your serial number is : REGISTER ONLINE: Within 10 days of purchase, yo u may register your Clifford purchase online at ww w .clifford.com/manuals so that we can contact you in the future if there are any changes or improvements to your GP500 system.
USA Head quar ters: Clif ford Elec tron ics, Inc. 20750 Las sen Street, Chatsworth, CA 91311 Within USA: 1- 800- 824- 3208 Phone: (818) 709- 7551 Fax: (818)407- 1743 All Clifford sys tems are cov ered.
An important point after buying a device Clifford GP500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Clifford GP500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Clifford GP500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Clifford GP500 you will learn all the available features of the product, as well as information on its operation. The information that you get Clifford GP500 will certainly help you make a decision on the purchase.
If you already are a holder of Clifford GP500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Clifford GP500.
However, one of the most important roles played by the user manual is to help in solving problems with Clifford GP500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Clifford GP500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
