Instruction/ maintenance manual of the product Omega Super Audio Classe Audio
Go to page of 12
OWNER’S MANUAL Omega Super Audio Compact Disc Player V1.0.
CONTENTS Safety Precautions 3 Introduction 3 Congratulations 3 How to use this manual 3 Classé Omega SACD Player: Design Overview 3 T ransport 3 Digital Filtering Section 3 DAC Section 4 Power Supply.
3 SAFETY PRECAUTIONS W ARNING: failure to comply with these safety instructions can cause serious injury or death, or cause your Classé Omega SACD Player to be severely damaged or destroyed. Do not operate the Classé Omega SACD Player with any portion of the chassis removed or open.
4 DAC Section The digital to analog conversion circuitry is a completely new design by Classé Audio. This unique design utilizes six channels of the Crystal CS4397 delta-sigma converter . For each of the Omega SACD balanced outputs, two channels of this DAC are used, one for the positive signal and one for the negative.
AC power Check that the AC voltage for which this unit is configured matches your local AC line voltage. The correct operating voltage is indicated on the rear of the power supply chassis, adjacent to the AC power inlet.
6 CONTROLS AND OPERA TION This section describes all of the controls, front panel display , and operation of the Omega SACD Player . T urning on AC power The Omega SACD is turned on by means of a power switch located on the power supply unit. Do not turn the AC power on until all connections have been made.
Front panel display Below is an illustration of the Omega SACD front panel display and a description of each indicator . The remote control The remote control pr ovides access to all functions available on the front panel. In addition, several functions can only be accessed from the remote control.
8 Playing a disc After the disc is loaded and the drawer closed, the Omega SACD Player will begin to detect which type of disc has been loaded and read the table of contents. Note that the Omega SACD player takes longer to start playing after the disc is loaded compared to conventional CD players.
Using the direct access keypad The ten-digit keypad on the remote control can be used to directly access any track on the disc. Press the digits of the track you wish to access. T o access a track number greater than 11, press the >10 key , and then enter the two digit track number .
10 Controlling the display The Omega SACD Player display function can be changed using keys on the remote control as follows: ON/OFF Pressing the ON/OFF key will cause the display toggle between ON mode and OFF mode. In OFF mode, the display will remain off unless a key on the top panel or the remote control is pressed.
Using the Omega SACD remote control with other Classé products The Omega SACD Player remote control can be used to control all Classé pre-amplifiers and integrated amplifiers. VOLUME UP/DOWN Pressing these keys will raise or lower the pre-amplifier or integrated amplifier volume level.
W ARRANTY AND SERVICE For warranty service, contact your Classé dealer or Classé Audio directly at: Classé Audio 5070 Francois-Cusson Lachine, Québec Canada H8T 1B3 T elephone: +1 514 636 6384 Fax: +1 514 636 1428 email: cservice @ classeaudio.com Website: www .
An important point after buying a device Classe Audio Omega Super Audio (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Classe Audio Omega Super Audio yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Classe Audio Omega Super Audio - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Classe Audio Omega Super Audio you will learn all the available features of the product, as well as information on its operation. The information that you get Classe Audio Omega Super Audio will certainly help you make a decision on the purchase.
If you already are a holder of Classe Audio Omega Super Audio, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Classe Audio Omega Super Audio.
However, one of the most important roles played by the user manual is to help in solving problems with Classe Audio Omega Super Audio. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Classe Audio Omega Super Audio along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
